Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

GRACE USA
ROLL PIN PUNCHES

731940876546 354000011

Non-Marring, Precision-Machined To Fit Common Pin Sizes

For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off.

SPECS: Brass, 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" dia.

Plus...

Non marquant, usiné avec précision pour s'adapter aux tailles de goupilles courantes

Pour déplacer les viseurs, enfoncer des goupilles ou ajuster des pièces, marquer ou rayer la surface peut faire la différence entre un travail bien fait et un désastre. Usiné à partir de laiton hexagonal de qualité supérieure. L'ensemble de poinçons à goupille comprend 8 poinçons à goupille avec des extrémités qui s'adaptent autour des goupilles sans dévier.

CARACTÉRISTIQUES : Laiton, tige hexagonale de 5⁄16" (7,9 mm). Ensemble de poinçons / Ensemble de poinçons à goupille - 8 poinçons : 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" de diamètre.

Plus...

Évaluations client de GRACE USA BRASS ROLL PIN PUNCH SET, 8 PC

Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 2.2

Brass is a horrible pin punch material (14.03.2010)

This brass roll pin punch set is a nicely manufactured set that fails miserably at its intended function. The purpose of the brass is to eliminate marring of your upper or lower receiver as you are working. Brass fails for two reasons. First, you ABSOLUTELY can mar your receiver with brass. You can both gouge the aluminum and strip the anodizing off if you hit the punch against your receiver. Granted, it does less damage than a hardened steel punch, but don't let that lull you into a false sense of security. Second, these pin punches rapidly self-destruct as they are used. The steel roll pins quickly destroy the tip of your punches as you hammer them in. This is just a poor product, plain and simple. The best advise I can give you is to get a good set of steel roll pin punches from Brownells (lifetime guaranteed replacement) and be careful while using. Good luck!

Not worth the $'s (07.12.2011)

Bent the small punch with first time using....

Not Recommended (29.01.2012)

I've had this set for a while now, and not used until today. In working on one of my rifles I bent 2 of the brass punches. These punches cannot withstand any real working on rifles.

I disagree with other reviewers (03.09.2013)

Brass punches are indeed "soft", that's the reason you buy brass punches over steel punches in the first place.

Other reviewers mention using these to install roll pins in AR receivers. Again, this is a failure on the reviewer's part.

Roll pins must be "started" with starter punches (SKU 080-685-000 for example) and then drive them in/flush with the proper roll pin punche (SKU 354-000-025). Those are the tools you need for an AR.

These brass punches on the other hand are for lighter use, on visible parts you don't want to mar. Hence they aren't recommended as "general purpose" punches.

Damaged too easily (31.03.2014)

I used these punches for my M&P to try and install one of the Apex Tactical kits. I had to go find other punches just to get the job done. The shafts are not long enough to make it through the body of the weapon. The small punch bent on first use. The roll pin ends have been flattened and no longer tipped. This set also left yellow/gold color brass on every pin I drove it. My black weapons now has golden highlights...

Long story short get a set of steel start punches so you don't bend your longer steel roll pin drift punches and be careful!

Excellent punches for their INTENDED use (20.02.2015)

Stop buying these punches to drive roll pins and stout steel pins that require STEEL punches of matching size and type. Brass punches are meant for adjusting driftable sights and delicate parts that you do not want to gouge or peen over with steel punches. Brass punches are not meant for installing roll pins in receivers nor staking fasteners, etc. If you use the wrong tool for the job and you're disappointed, the fault is yours, not the tool's. You wouldn't carve a turkey with a butter knife. I own 3 sets of Grace punches, 3 sets of their screwdrivers, hammers, and a set of picks. They are fantastic in build quality, craftsmanship, and have no doubts I could pass them down through generations. Their screwdrivers are outstanding and fit the screw heads perfectly if you use the proper size. They aren't cheap, but you get an investment with these. Take care of them and use them for the right jobs.

Lire 6 plus d'avis sur brownells.com

64.9 64.9 1 CHF

Référence: 354000011
GRACE USA BRASS ROLL PIN PUNCH SET, 8 PC
Ref Fabricant: BRP-8 731940876546 Pour déplacer les viseurs, enfoncer des goupilles ou ajuster des pièces, marquer ou rayer la surface peut faire la différence entre un travail bien fait et un désastre. Usiné à partir de laiton hexagonal de qualité supérieure. L'ensemble de poinçons à goupille comprend 8 poinçons à goupille avec des extrémités qui s'adaptent autour des goupilles sans dévier.

64.9 CHF 15 CHF 64.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Matériaux: Brass Style: Kit, Goupille Creuse Quantité: 8

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Idéal pour dériver des organes de visée, enfoncer des goupilles ou ajuster des pièces.
Usinés en laiton hexagonal de qualité supérieure pour une durabilité optimale.
L'ensemble comprend 8 poinçons de différents diamètres pour s'adapter à vos besoins.

Caractéristiques

Matériaux: Brass Style: Goupille Creuse,Kit Quantité: 8 Poids du colis: 0.318kg Hauteur d'expédition: 18mm Largeur d'expédition: 97mm Longueur d'expédition: 163mm UPC : 731940876546

Détails de l'article

Fabriqué au USA

Découvrez l'ensemble de 8 poinçons à goupille en laiton GRACE USA 🔧. Parfait pour vos projets de précision et ajustements!

Non-Marring, Precision-Machined To Fit Common Pin Sizes

SPECS: Brass, 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" dia.

Plus...

Non marquant, usiné avec précision pour s'adapter aux tailles de goupilles courantes

Plus...

Évaluations client de GRACE USA BRASS ROLL PIN PUNCH SET, 8 PC

Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 2.2

Brass is a horrible pin punch material (14.03.2010)

Not worth the $'s (07.12.2011)

Bent the small punch with first time using....

Not Recommended (29.01.2012)

I've had this set for a while now, and not used until today. In working on one of my rifles I bent 2 of the brass punches. These punches cannot withstand any real working on rifles.

I disagree with other reviewers (03.09.2013)