BROWNELLS
RUBBER-FACED VISE JAWS

050806101517 080827000

Protects Delicate Or Polished Parts From Damage

Will not mark or scratch expensive or delicate firearm parts, but holds them firmly without damage. Durable, nylon-reinforced rubber is permanently bonded to lightweight aluminum, replaceable jaws. Wide retaining lip with nitrile magnet on the underside keeps jaws in place; drops right onto any 4", 5" or 6" steel bench vise and stays put.

SPECS: Aluminum jaws, rubber face. 4" (10cm) long, 3/8" (9.5mm) thick, 1¼" (3.8cm) wide face.

Plus...

Protège les pièces délicates ou polies des dommages

Ne marquera ni ne rayera les pièces d'arme à feu coûteuses ou délicates, tout en les maintenant fermement sans les endommager. Le caoutchouc durable renforcé de nylon est fixé de manière permanente à l'aluminium léger, avec des mâchoires remplaçables. La large lèvre de retenue avec un aimant en nitrile sur le dessous maintient les mâchoires en place ; s'adapte facilement sur n'importe quel étau en acier de 4", 5" ou 6" et reste bien en place.

SPECS : Jaws en aluminium, face en caoutchouc. Longueur de 4" (10cm), épaisseur de 3/8" (9.5mm), face large de 1¼" (3.8cm).

Plus...

Évaluations client de BROWNELLS RUBBER-FACED VISE JAWS

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4

Poorly made (03.07.2010)

I would use this product to clamp parts I don't want to scratch or mar, except when taking the part off of the "Rubber Faced Vise Jaws" they stick to the parts. The real problem with this product is the glue they used to mount the rubber face and the magnetic strip does not hold. The rubber starts to peel off and the magnet sticks the vise when you remove the jaws.

A great idea - and it works (16.03.2011)

I have had these jaw faces for a long time - maybe 15 years or so, and they do a very good job of protecting while holding tight.

The magnets however, are weak and the faces fall off when the vise is opened. Other than that, I would have given it 5 stars.

Darn good vise jaws (14.06.2011)

I use these jaws every day in a 4" Wilton vise on my primary workbench. No, the magnets won't hold the jaws to a refrigerator door, but they are strong enough to keep the magnets in place while I open and close the vise. The rubber pads are a bit sticky when I clamp a flat surface like a shotgun receiver, but they also hold that receiver without scratching it, which is the intended purpose. I like them.

A decent product, but magnets are weak. (07.12.2011)

I use it on my 4" utility vise. It really protects the object being held and still holds very tight.

The reason for not giving it 5 stars is the weak magnets. I bought mine about 15 years back and the weak magnets haven't gotten any stronger with time.

Great pair of jaws that can take abuse (29.04.2013)

Bought a pair of these about 3 years ago when I started my gun repair operation. Best set I have ever owned for the price. I have tourtered these things for three years and I need to replace them. Magnets seemed to wear out really quick but I think that was due to the fact that my vice had a rare earth magnet on it for some time. I would recommend to any professional or DIY.

Lightweight jaws-good pads-poor magnets (13.10.2014)

Lightweight aluminum angles are a little thin, but sturdy enough. The rubber pads give a good grip and provide some cushion. But as the other reviews noted, the refrigerator magnet strips they use are very weak and just barely hold on to your vice jaws.

Very Good Vice Pads (27.05.2015)

I have been using mine every day for 5 years and have abused them along the way and they still do a great job. I have had to reglue them a time or two and the magnets are still the same as they were the day I recieved them, barely able to hold. But I really dont mind because they work! I put a pair of the Super Hold Vise Jaw Pads (852-002-200) on my new vise but still have the other vise and pads on the bench. Both were a good purchase!!

Lire 7 plus d'avis sur brownells.com

45.9 45.9 1 CHF

Référence: 080827000
BROWNELLS RUBBER-FACED VISE JAWS
Ref Fabricant: 48100 050806101517 Ne marquera ni ne rayera les pièces d'arme à feu coûteuses ou délicates, tout en les maintenant fermement sans les endommager. Le caoutchouc durable renforcé de nylon est fixé de manière permanente à l'aluminium léger, avec des mâchoires remplaçables. La large lèvre de retenue avec un aimant en nitrile sur le dessous maintient les mâchoires en place ; s'adapte facilement sur n'importe quel étau en acier de 4", 5" ou 6" et reste bien en place.

45.9 CHF 0 CHF 45.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Ne marque ni ne raye vos pièces d'arme délicates tout en les maintenant fermement.
Fabriquées en caoutchouc durable renforcé de nylon, collées à des jaws en aluminium légers et remplaçables.
Se fixe facilement à n'importe quel étau en acier de 4", 5" ou 6" grâce à un aimant en nitrile.