Positive Extraction Of Match Chambers For The Mk II? Pistol & 10/22~ Rifle
Machined with sharp, well defined angles to securely grip case head and give positive extraction even on tight, match chambered barrels. Will not “blow out” in the event of a ruptured case. Hard and tough titanium or A-2 Tool steel greatly extends service life. Available in Titanium or A-2 Tool Steel. Correct dimension works in 10/22®, 10/22® Magnum and Mk II™ pistol without modification.
SPECS: Titanium - 6 AL-4V titanium. Silver finish. Includes extra power spring. A-2 Tool Steel - A-2 Tool Steel, black. Inlcudes extra power spring.
Plus...
Extraction Positive Des Chambres De Match Pour Le Pistolet Mk II? & Carabine 10/22~
Usiné avec des angles aigus et bien définis pour saisir solidement la tête de la douille et garantir une extraction positive même sur des canons à chambre serrée et de compétition. Ne se "déformera" pas en cas de rupture de douille. Le titane dur et résistant ou l'acier A-2 prolongent considérablement la durée de vie. Disponible en titane ou en acier A-2. Les dimensions correctes fonctionnent dans les 10/22®, 10/22® Magnum et le pistolet Mk II™ sans modification.
SPÉCIFICATIONS : Titane - Titane 6 AL-4V. Fini argenté. Comprend un ressort à puissance supplémentaire. Acier Outil A-2 - Acier Outil A-2, noir. Comprend un ressort à puissance supplémentaire.
Plus...
Évaluations client de POWER CUSTOM TITANIUM EXTRACTOR
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 5
A-2 Tool Steel(26.11.2011)
I did some research about tool steel and their uses at [@] before purchasing. A-2 tool steel is a good grade for this tool. I would recommend it.
Works great ... but may not be "drop in"(02.12.2012)
I needed a new extractor for a 25 year-old MK II pistol. This one works perfectly, but I did need to trim a slight amount off the tail end; otherwise, it would not pivot freely. It was literally a two minute file job.
Great Extractor(06.10.2010)
Easy to install, worked great without fitting, and my 10-22 has been flawless since. Took just a few minutes to install with no special tools required. Mine came came with the extractor spring. I'm gonna order some more for my other 10-22s.
Good Upgrade(17.01.2012)
Easily drops in. Provides better, more reliable extraction plus more durability
Very satisfied(15.09.2012)
Bought a used 10/22 a while back. Needed a thorough cleaning upon purchase. Even after cleaning it failed to properly extract and eject spent brass. Picked this extractor up this week. Installed it myself. (The "just drop it in" instructions are correct if your 10/22 is free of 17 years of unattended grime.) Put 150 rounds thru it with no failed extractions/ejections. Very happy. FYI: the company that makes these is actually right in my neighborhood of Missouri.
A+++(04.01.2013)
I recently purchased a Ruger 10/22 compact model for my son. I would get about 2 failures to eject about every 10 rounds. It seemed as though the empty case got let go before it struck the ejector. A new round would be chambered, but the old case would be only partially ejected with the bolt pinching it unable to fully close. The extractor I had showed just very slight wear....not enough that I would have thought it was problem...but apparently it was.
200 rounds through the gun as soon as I put this extractor in with multiple types of ammo and 0 failures.
Great product!!
It's What You Need!(22.02.2014)
I've never had troubles with a 10/22 extracting, and I've owned one since 1965. But this was my buying a receiver from here and a bolt from from there and a barrel from.. well.. ebay. It's a target barrel with a tight chamber. Just cycling rounds through it to test it... never fired it... failed to extract, period. Doing a little work on the extractor made it at least spotty. So I ordered one of these.
The combination of a well shaped, hard, sharp extractor claw coupled with the significantly heaver extractor plunger spring did the trick. Has cycled every round. I'm sure it will work great when I shoot it... if I can find some .22LR!
Référence: 713123003 POWER CUSTOM TITANIUM EXTRACTOR Ref Fabricant: NONE Usiné avec des angles aigus et bien définis pour saisir solidement la tête de la douille et garantir une extraction positive même sur des canons à chambre serrée et de compétition. Ne se "déformera" pas en cas de rupture de douille. Le titane dur et résistant ou l'acier A-2 prolongent considérablement la durée de vie. Disponible en titane ou en acier A-2. Les dimensions correctes fonctionnent dans les 10/22®, 10/22® Magnum et le pistolet Mk II™ sans modification.
36.9CHF2CHF 36.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 713000067 POWER CUSTOM A-2 TOOL STEEL EXTRACTOR Ref Fabricant: 1022A2TSE Usiné avec des angles aigus et bien définis pour saisir solidement la tête de la douille et garantir une extraction positive même sur des canons à chambre serrée et de compétition. Ne se "déformera" pas en cas de rupture de douille. Le titane dur et résistant ou l'acier A-2 prolongent considérablement la durée de vie. Disponible en titane ou en acier A-2. Les dimensions correctes fonctionnent dans les 10/22®, 10/22® Magnum et le pistolet Mk II™ sans modification.
34.9CHF0CHF 34.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Positive Extraction Of Match Chambers For The Mk II? Pistol & 10/22~ Rifle
Machined with sharp, well defined angles to securely grip case head and give positive extraction even on tight, match chambered barrels. Will not “blow out” in the event of a ruptured case. Hard and tough titanium or A-2 Tool steel greatly extends service life. Available in Titanium or A-2 Tool Steel. Correct dimension works in 10/22®, 10/22® Magnum and Mk II™ pistol without modification.
SPECS: Titanium - 6 AL-4V titanium. Silver finish. Includes extra power spring. A-2 Tool Steel - A-2 Tool Steel, black. Inlcudes extra power spring.
Plus...
Extraction Positive Des Chambres De Match Pour Le Pistolet Mk II? & Carabine 10/22~
Usiné avec des angles aigus et bien définis pour saisir solidement la tête de la douille et garantir une extraction positive même sur des canons à chambre serrée et de compétition. Ne se "déformera" pas en cas de rupture de douille. Le titane dur et résistant ou l'acier A-2 prolongent considérablement la durée de vie. Disponible en titane ou en acier A-2. Les dimensions correctes fonctionnent dans les 10/22®, 10/22® Magnum et le pistolet Mk II™ sans modification.
SPÉCIFICATIONS : Titane - Titane 6 AL-4V. Fini argenté. Comprend un ressort à puissance supplémentaire. Acier Outil A-2 - Acier Outil A-2, noir. Comprend un ressort à puissance supplémentaire.
Plus...
Évaluations client de POWER CUSTOM TITANIUM EXTRACTOR
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 5
A-2 Tool Steel(26.11.2011)
I did some research about tool steel and their uses at [@] before purchasing. A-2 tool steel is a good grade for this tool. I would recommend it.
Works great ... but may not be "drop in"(02.12.2012)
I needed a new extractor for a 25 year-old MK II pistol. This one works perfectly, but I did need to trim a slight amount off the tail end; otherwise, it would not pivot freely. It was literally a two minute file job.
Great Extractor(06.10.2010)
Easy to install, worked great without fitting, and my 10-22 has been flawless since. Took just a few minutes to install with no special tools required. Mine came came with the extractor spring. I'm gonna order some more for my other 10-22s.
Good Upgrade(17.01.2012)
Easily drops in. Provides better, more reliable extraction plus more durability
Very satisfied(15.09.2012)
Bought a used 10/22 a while back. Needed a thorough cleaning upon purchase. Even after cleaning it failed to properly extract and eject spent brass. Picked this extractor up this week. Installed it myself. (The "just drop it in" instructions are correct if your 10/22 is free of 17 years of unattended grime.) Put 150 rounds thru it with no failed extractions/ejections. Very happy. FYI: the company that makes these is actually right in my neighborhood of Missouri.
A+++(04.01.2013)
I recently purchased a Ruger 10/22 compact model for my son. I would get about 2 failures to eject about every 10 rounds. It seemed as though the empty case got let go before it struck the ejector. A new round would be chambered, but the old case would be only partially ejected with the bolt pinching it unable to fully close. The extractor I had showed just very slight wear....not enough that I would have thought it was problem...but apparently it was.
200 rounds through the gun as soon as I put this extractor in with multiple types of ammo and 0 failures.
Great product!!
It's What You Need!(22.02.2014)
I've never had troubles with a 10/22 extracting, and I've owned one since 1965. But this was my buying a receiver from here and a bolt from from there and a barrel from.. well.. ebay. It's a target barrel with a tight chamber. Just cycling rounds through it to test it... never fired it... failed to extract, period. Doing a little work on the extractor made it at least spotty. So I ordered one of these.
The combination of a well shaped, hard, sharp extractor claw coupled with the significantly heaver extractor plunger spring did the trick. Has cycled every round. I'm sure it will work great when I shoot it... if I can find some .22LR!