Extended lever has a wide, ambidextrous finger pad to allow you to drop the mag without changing your grip or shooting position. Activates easily with just the trigger finger, so you can drop the magazine without fumbling. Engineered not to release the magazine when accidentally bumped. Ergonomically shaped, molded from lightweight yet durable polymer. Drop-in fit.
SPECS: Injection-molded polymer, matte black. 2½" (6.3cm) OAL, 15⁄8" (4.1cm) long lever arm, 11⁄8" (2.8cm) wide thumb pad.
Plus...
Vous Permet de Lâcher le Chargeur Sans Rompre Votre Prise
Le levier prolongé dispose d'un large pad pour les doigts, ambidextre, vous permettant de libérer le chargeur sans changer votre prise ou votre position de tir. S'active facilement avec juste le doigt de la gâchette, vous pouvez donc lâcher le chargeur sans vous embarrasser. Conçu pour ne pas libérer le chargeur en cas de coup accidentel. Forme ergonomique, moulé à partir d'un polymère léger mais durable. Installation facile.
SPÉCIFICATIONS : Polymère injecté, noir mat. 2½" (6,3 cm) OAL, bras de levier long de 15⁄8" (4,1 cm), pad pour le pouce large de 11⁄8" (2,8 cm).
Plus...
Évaluations client de CROSSFIRE SHOOTING GEAR T3 MAGAZINE RELEASE LEVER
Nombre d'évaluations: 8
De brownells.com: 8
Note moyenne: 4.8
Great Addition!(27.06.2011)
This was a great addition to my Ruger 10/22 compact! It follows the contours of the trigger guard much better than the Tactical Solutions brand, and doesnt wobble near as much (none really). Mags hold in firmly and release with ease. Only takes a small adjustment with my trigger hand/finger to release/insert a mag. Only four stars because I havent had the chance to use it at the range yet.
A huge improvement over factory(14.08.2011)
Makes releasing the magazine easy for right- or left-handed shooters with just the use of the trigger finger. Installation took less than 5 minutes.
Affordable & Fast(15.10.2011)
This is a great item if you're looking to improve your magazine reload time. Magazine drops free every time even when empty on my standard 10/22 carbine. Conforms nicely to the trigger housing. Ambidextrous. Easy to install: unload rifle, remove the barrel band, barrel retainer screw, slightly depress the circular magazine retainer, remove the stock magazine release, insert the new one, release the circular magazine retainer and you're done. No tools required for installation other than what's needed to get the barrel/receiver out.
I did find the edges a little sharp for my liking. A few minutes with some fine sandpaper changed that. I also decided to dremel the portion of the release near the bolt catch lever thingie to give me a little more clearance in that area because I thought it did slightly interfere with that.
I installed it in conjunction with my Tapco Intrafuse stock and works just fine. I also installed a Volquartsen bolt release (a must-have in my mind) and it does not interfere with that in any way.
The release sits about where my first joint of my extended index finger is. It would be better in ergonomics for my size hands if it rested about .5" to .75" forward of where it currently sits. However, it's in a good spot for children and women with smaller hands.
Overall, no major complaints. 5 stars is a near impossible task in my mind and gave it 4 for the reasons listed above. I plan to buy another some time in the future.
Good fit and function(17.01.2012)
Drops right in. Fits nicely around trigger guard and looks great. I really like the widen portion that allows for easy 1 handed release. Only set back is it makes it hard to actuate bolt catch, especially with gloves on, but its nothing I can't live with.
The Best Choice(07.05.2012)
I looked at a lot of other mag releases and opted for this one for several reasons. First, it places the release at your fingertips where it belongs. Second, it is a stronger design because most of the other ones are long and thin, creating a "perfect storm" for breaking them, especially in a competition environment where the adrenaline is flowing. Third, the polymer is just plain indestructible. Throw in the fact that the price is less expensive than most other choices, and it's a no-brainer.
Excellent, fast with all stocks(08.02.2013)
Put it on my 10/22 with a pistol grip stock (Blackhawk). The Tactical Solutions release which I had on the gun in the factory stock didn't leave my fingers any room to work it! I love the TacSol release, but not on that stock.
Installed the PWS release, now the operation is the same as dropping the mag on my AK with a Power Custom magazine release. My only complaint is that the edges are a little bit sharp.
Outstanding Upgrade(11.07.2016)
Installed this on a 10/22 used occasionally for Steel Challenge competition. This is maybe the best upgrade you can make to a 10/22 that needs to be reloaded often and relatively quickly, especially considering the price.
Some may say it's not the flashiest mag release available and they'd be right. But for folks who are more concerned with function over form it's perfect. The mags lock in tight, both BX-1's and BX-25's, and drop free with the push of your index finger. It does not get in the way of or interfere with the regular function of the rifle in any way.
In the end this is a five star, two thumbs up product...
Easy install(16.10.2016)
I installed one in my Ruger Charger and I am very happy. Fit was drop in no problem ,great fit ,easy to operate .
Référence: 100006639 CROSSFIRE SHOOTING GEAR T3 MAGAZINE RELEASE LEVER Ref Fabricant: CRF-R1022MRL812254022277 Le levier prolongé dispose d'un large pad pour les doigts, ambidextre, vous permettant de libérer le chargeur sans changer votre prise ou votre position de tir. S'active facilement avec juste le doigt de la gâchette, vous pouvez donc lâcher le chargeur sans vous embarrasser. Conçu pour ne pas libérer le chargeur en cas de coup accidentel. Forme ergonomique, moulé à partir d'un polymère léger mais durable. Installation facile.
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Améliore ton expérience de tir avec le levier de libération T3 de CROSSFIRE. 🎯 Ergonomique et facile à installer, il est parfait pour tous les tireurs.
Extended lever has a wide, ambidextrous finger pad to allow you to drop the mag without changing your grip or shooting position. Activates easily with just the trigger finger, so you can drop the magazine without fumbling. Engineered not to release the magazine when accidentally bumped. Ergonomically shaped, molded from lightweight yet durable polymer. Drop-in fit.
SPECS: Injection-molded polymer, matte black. 2½" (6.3cm) OAL, 15⁄8" (4.1cm) long lever arm, 11⁄8" (2.8cm) wide thumb pad.
Plus...
Vous Permet de Lâcher le Chargeur Sans Rompre Votre Prise
Le levier prolongé dispose d'un large pad pour les doigts, ambidextre, vous permettant de libérer le chargeur sans changer votre prise ou votre position de tir. S'active facilement avec juste le doigt de la gâchette, vous pouvez donc lâcher le chargeur sans vous embarrasser. Conçu pour ne pas libérer le chargeur en cas de coup accidentel. Forme ergonomique, moulé à partir d'un polymère léger mais durable. Installation facile.
SPÉCIFICATIONS : Polymère injecté, noir mat. 2½" (6,3 cm) OAL, bras de levier long de 15⁄8" (4,1 cm), pad pour le pouce large de 11⁄8" (2,8 cm).
Plus...
Évaluations client de CROSSFIRE SHOOTING GEAR T3 MAGAZINE RELEASE LEVER
Nombre d'évaluations: 8
De brownells.com: 8
Note moyenne: 4.8
Great Addition!(27.06.2011)
This was a great addition to my Ruger 10/22 compact! It follows the contours of the trigger guard much better than the Tactical Solutions brand, and doesnt wobble near as much (none really). Mags hold in firmly and release with ease. Only takes a small adjustment with my trigger hand/finger to release/insert a mag. Only four stars because I havent had the chance to use it at the range yet.
A huge improvement over factory(14.08.2011)
Makes releasing the magazine easy for right- or left-handed shooters with just the use of the trigger finger. Installation took less than 5 minutes.
Affordable & Fast(15.10.2011)
This is a great item if you're looking to improve your magazine reload time. Magazine drops free every time even when empty on my standard 10/22 carbine. Conforms nicely to the trigger housing. Ambidextrous. Easy to install: unload rifle, remove the barrel band, barrel retainer screw, slightly depress the circular magazine retainer, remove the stock magazine release, insert the new one, release the circular magazine retainer and you're done. No tools required for installation other than what's needed to get the barrel/receiver out.
I did find the edges a little sharp for my liking. A few minutes with some fine sandpaper changed that. I also decided to dremel the portion of the release near the bolt catch lever thingie to give me a little more clearance in that area because I thought it did slightly interfere with that.
I installed it in conjunction with my Tapco Intrafuse stock and works just fine. I also installed a Volquartsen bolt release (a must-have in my mind) and it does not interfere with that in any way.
The release sits about where my first joint of my extended index finger is. It would be better in ergonomics for my size hands if it rested about .5" to .75" forward of where it currently sits. However, it's in a good spot for children and women with smaller hands.
Overall, no major complaints. 5 stars is a near impossible task in my mind and gave it 4 for the reasons listed above. I plan to buy another some time in the future.
Good fit and function(17.01.2012)
Drops right in. Fits nicely around trigger guard and looks great. I really like the widen portion that allows for easy 1 handed release. Only set back is it makes it hard to actuate bolt catch, especially with gloves on, but its nothing I can't live with.
The Best Choice(07.05.2012)
I looked at a lot of other mag releases and opted for this one for several reasons. First, it places the release at your fingertips where it belongs. Second, it is a stronger design because most of the other ones are long and thin, creating a "perfect storm" for breaking them, especially in a competition environment where the adrenaline is flowing. Third, the polymer is just plain indestructible. Throw in the fact that the price is less expensive than most other choices, and it's a no-brainer.
Excellent, fast with all stocks(08.02.2013)
Put it on my 10/22 with a pistol grip stock (Blackhawk). The Tactical Solutions release which I had on the gun in the factory stock didn't leave my fingers any room to work it! I love the TacSol release, but not on that stock.
Installed the PWS release, now the operation is the same as dropping the mag on my AK with a Power Custom magazine release. My only complaint is that the edges are a little bit sharp.
Outstanding Upgrade(11.07.2016)
Installed this on a 10/22 used occasionally for Steel Challenge competition. This is maybe the best upgrade you can make to a 10/22 that needs to be reloaded often and relatively quickly, especially considering the price.
Some may say it's not the flashiest mag release available and they'd be right. But for folks who are more concerned with function over form it's perfect. The mags lock in tight, both BX-1's and BX-25's, and drop free with the push of your index finger. It does not get in the way of or interfere with the regular function of the rifle in any way.
In the end this is a five star, two thumbs up product...
Easy install(16.10.2016)
I installed one in my Ruger Charger and I am very happy. Fit was drop in no problem ,great fit ,easy to operate .
Aide et contact
Newsletter
Vue classique
Vue mobile