Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

EGW
RUGER® MK I, II, III, IV, P85, P90 TRIJICON RMR SIGHT MOUNT

841370116522 296000580
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
79.9 79.9 1 CHF
N. prodotto: 296000580
EGW RUGER® MKI, II, III, IV, P85, P90 TRIJICON RMR SIGHT MOUNT
Parti Fabbricante: 49521 841370116522
79.9 CHF 4 CHF 79.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Ruger Colore: Black Materiale: Alluminio Modello: Mark III, Mark I, Mark II, P89, 22/45, Mark IV, P85, P97 Numero di basi: 1 pezzo Tipo: Tattico

Caratteristiche

Adatto per: Ruger Colore: Black Materiale: Alluminio Modello: 22/45,Mark I,Mark II,Mark III,Mark IV,P85,P89,P97 Numero di basi: 1 pezzo Tipo: Tattico Peso della spedizione: 0.032kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 133mm UPC : 841370116522

Dettagli dell'elemento

Made in Usa



Monta il tuo TRIJICON RMR con il RUGER® MK I-IV e P85, P90. Realizzato in alluminio nero, perfetto per il tuo stile tattico! ✨

Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Torna all'inizio