Clamps to factory ring cuts; keeps mounting height low and over the receiver. Lots of slots for Weaver-style rings. 77/22® fits .22 LR and .22 Magnum with no modifications to rifle. 77/44® also fits 77/22®, .22 Hornet.
SPECS: Aluminum, matte finish, black or silver. 5" (12.7cm) long. .495" high RUGER 77/22 Scope Mounts RUGER 77/17 , .22 Rimfire, .22 Magnum, .17 HMR.
Plus...
Augmente les options de montage sur 77/22 & 77/44
Se fixe aux découpes de bague d'origine ; maintient la hauteur de montage basse et au-dessus du récepteur. Beaucoup de fentes pour les anneaux de style Weaver. Le 77/22® s'adapte au .22 LR et au .22 Magnum sans modifications du fusil. Le 77/44® s'adapte également au 77/22®, .22 Hornet.
CARACTÉRISTIQUES : Aluminium, finition mate, noir ou argent. Longueur de 5" (12,7 cm). Hauteur de .495" Supports de lunette RUGER 77/22 RUGER 77/17, .22 Rimfire, .22 Magnum, .17 HMR.
Plus...
Évaluations client de WEIGAND COMBAT SCOPE MOUNT PICATINNY FOR RUGER 77/22 SILVER
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
absolutely fantastic, fits perfect(12.09.2011)
It's just a good solid fit and does not interfer with ajecting the spent shells or the action of the bolt ...... regards Ken
WORTH THE WAIT(19.06.2010)
As a long time Ruger 77/22 user, got one of the first ones ever shipped to Australia, I was looking for a rifle to mount a newly aquired EOTECH sight to and my other firearms did not have a picatiny rail and the first place I turned to was Bownells and I found a new product to suit, the Weigand scope mount. So once it arrived the were not problems with mounting the rail,very straight forward and the EOTECH mated straight on with no problems apart from a little shimming under the front of the sight. Great product. Can you make one for the SSG69 and one for the SAKO 579?
Very good base mount(26.02.2012)
This is a good mount for the Ruger 77/357 and Ruger 77/44. I'd like to see was a better method for indexing the base to the receiver. Forward and back indexing is accomplished with a roll pin, laterally there is really no way to center the base on the receiver, other than carefully adjusting the mounting screws in or out. The rear of the base could be a bit longer to accomodate the Weaver style rings. A weaver ring will overhang the back of the base by about an eighth of an inch.
Référence: 957000047 WEIGAND COMBAT SCOPE MOUNT PICATINNY FOR RUGER 77/22 SILVER Ref Fabricant: 7722PS Se fixe aux découpes de bague d'origine ; maintient la hauteur de montage basse et au-dessus du récepteur. Beaucoup de fentes pour les anneaux de style Weaver. Le 77/22® s'adapte au .22 LR et au .22 Magnum sans modifications du fusil. Le 77/44® s'adapte également au 77/22®, .22 Hornet.
99.9CHF0CHF 99.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Clamps to factory ring cuts; keeps mounting height low and over the receiver. Lots of slots for Weaver-style rings. 77/22® fits .22 LR and .22 Magnum with no modifications to rifle. 77/44® also fits 77/22®, .22 Hornet.
SPECS: Aluminum, matte finish, black or silver. 5" (12.7cm) long. .495" high RUGER 77/22 Scope Mounts RUGER 77/17 , .22 Rimfire, .22 Magnum, .17 HMR.
Plus...
Augmente les options de montage sur 77/22 & 77/44
Se fixe aux découpes de bague d'origine ; maintient la hauteur de montage basse et au-dessus du récepteur. Beaucoup de fentes pour les anneaux de style Weaver. Le 77/22® s'adapte au .22 LR et au .22 Magnum sans modifications du fusil. Le 77/44® s'adapte également au 77/22®, .22 Hornet.
CARACTÉRISTIQUES : Aluminium, finition mate, noir ou argent. Longueur de 5" (12,7 cm). Hauteur de .495" Supports de lunette RUGER 77/22 RUGER 77/17, .22 Rimfire, .22 Magnum, .17 HMR.
Plus...
Évaluations client de WEIGAND COMBAT SCOPE MOUNT PICATINNY FOR RUGER 77/22 SILVER
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
absolutely fantastic, fits perfect(12.09.2011)
It's just a good solid fit and does not interfer with ajecting the spent shells or the action of the bolt ...... regards Ken
WORTH THE WAIT(19.06.2010)
As a long time Ruger 77/22 user, got one of the first ones ever shipped to Australia, I was looking for a rifle to mount a newly aquired EOTECH sight to and my other firearms did not have a picatiny rail and the first place I turned to was Bownells and I found a new product to suit, the Weigand scope mount. So once it arrived the were not problems with mounting the rail,very straight forward and the EOTECH mated straight on with no problems apart from a little shimming under the front of the sight. Great product. Can you make one for the SSG69 and one for the SAKO 579?
Very good base mount(26.02.2012)
This is a good mount for the Ruger 77/357 and Ruger 77/44. I'd like to see was a better method for indexing the base to the receiver. Forward and back indexing is accomplished with a roll pin, laterally there is really no way to center the base on the receiver, other than carefully adjusting the mounting screws in or out. The rear of the base could be a bit longer to accomodate the Weaver style rings. A weaver ring will overhang the back of the base by about an eighth of an inch.