Clamps to factory ring cuts; keeps mounting height low and over the receiver. Lots of slots for Weaver-style rings. 77/22® fits .22 LR and .22 Magnum with no modifications to rifle. 77/44® also fits 77/22®, .22 Hornet.
SPECS: Aluminum, matte finish, black or silver. 5" (12.7cm) long. .495" high RUGER 77/22 Scope Mounts RUGER 77/17 , .22 Rimfire, .22 Magnum, .17 HMR.
Altro...
Aumenta le Opzioni di Montaggio su 77/22 & 77/44
Si fissa ai tagli delle ancore di fabbrica; mantiene l'altezza di montaggio bassa e sopra il ricevitore. Molte fessure per anelli in stile Weaver. 77/22® si adatta a .22 LR e .22 Magnum senza modifiche al fucile. 77/44® si adatta anche a 77/22®, .22 Hornet.
SPECIFICHE: Alluminio, finitura opaca, nero o argento. Lunghezza di 5" (12,7 cm). Altezza di .495" Montature per ottiche RUGER 77/22 RUGER 77/17, .22 Rimfire, .22 Magnum, .17 HMR.
Altro...
Punteggi dei clienti per WEIGAND COMBAT SCOPE MOUNT PICATINNY FOR RUGER 77/22 SILVER
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
absolutely fantastic, fits perfect(12.09.2011)
It's just a good solid fit and does not interfer with ajecting the spent shells or the action of the bolt ...... regards Ken
WORTH THE WAIT(19.06.2010)
As a long time Ruger 77/22 user, got one of the first ones ever shipped to Australia, I was looking for a rifle to mount a newly aquired EOTECH sight to and my other firearms did not have a picatiny rail and the first place I turned to was Bownells and I found a new product to suit, the Weigand scope mount. So once it arrived the were not problems with mounting the rail,very straight forward and the EOTECH mated straight on with no problems apart from a little shimming under the front of the sight. Great product. Can you make one for the SSG69 and one for the SAKO 579?
Very good base mount(26.02.2012)
This is a good mount for the Ruger 77/357 and Ruger 77/44. I'd like to see was a better method for indexing the base to the receiver. Forward and back indexing is accomplished with a roll pin, laterally there is really no way to center the base on the receiver, other than carefully adjusting the mounting screws in or out. The rear of the base could be a bit longer to accomodate the Weaver style rings. A weaver ring will overhang the back of the base by about an eighth of an inch.
N. prodotto: 957000047 WEIGAND COMBAT SCOPE MOUNT PICATINNY FOR RUGER 77/22 SILVER Parti Fabbricante: 7722PS Si fissa ai tagli delle ancore di fabbrica; mantiene l'altezza di montaggio bassa e sopra il ricevitore. Molte fessure per anelli in stile Weaver. 77/22® si adatta a .22 LR e .22 Magnum senza modifiche al fucile. 77/44® si adatta anche a 77/22®, .22 Hornet.
99.9CHF0CHF 99.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: RugerColore: SilverMateriale: AlluminioModello: 77/22Numero di basi: 1 pezzoTipo: Basi stile Weaver
Si fissa ai tagli per anelli di fabbrica, mantenendo l'altezza di montaggio bassa e sopra il ricevitore.
Compatibile con Ruger 77/22 e 77/44, adatto per .22 LR, .22 Magnum e .22 Hornet senza modifiche al fucile.
Realizzato in alluminio con finitura opaca, disponibile in colore silver, lunghezza di 5" e altezza di .495".
Caratteristiche
Adatto per:
Ruger
Colore:
Silver
Materiale:
Alluminio
Modello:
77/22
Numero di basi:
1 pezzo
Tipo:
Basi stile Weaver
Peso della spedizione: 0.091kgAltezza di spedizione: 15mmLarghezza di spedizione: 89mmLunghezza di spedizione: 175mm
Dettagli dell'elemento
Made in Usa
Scopri il WEIG-A-TINNY® Scope Mount per Ruger® 77/22. Montaggio facile e stabile per ottiche. 🔭 Compatibile con .22 LR e Magnum.
Clamps to factory ring cuts; keeps mounting height low and over the receiver. Lots of slots for Weaver-style rings. 77/22® fits .22 LR and .22 Magnum with no modifications to rifle. 77/44® also fits 77/22®, .22 Hornet.
SPECS: Aluminum, matte finish, black or silver. 5" (12.7cm) long. .495" high RUGER 77/22 Scope Mounts RUGER 77/17 , .22 Rimfire, .22 Magnum, .17 HMR.
Altro...
Aumenta le Opzioni di Montaggio su 77/22 & 77/44
Si fissa ai tagli delle ancore di fabbrica; mantiene l'altezza di montaggio bassa e sopra il ricevitore. Molte fessure per anelli in stile Weaver. 77/22® si adatta a .22 LR e .22 Magnum senza modifiche al fucile. 77/44® si adatta anche a 77/22®, .22 Hornet.
SPECIFICHE: Alluminio, finitura opaca, nero o argento. Lunghezza di 5" (12,7 cm). Altezza di .495" Montature per ottiche RUGER 77/22 RUGER 77/17, .22 Rimfire, .22 Magnum, .17 HMR.
Altro...
Punteggi dei clienti per WEIGAND COMBAT SCOPE MOUNT PICATINNY FOR RUGER 77/22 SILVER
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
absolutely fantastic, fits perfect(12.09.2011)
It's just a good solid fit and does not interfer with ajecting the spent shells or the action of the bolt ...... regards Ken
WORTH THE WAIT(19.06.2010)
As a long time Ruger 77/22 user, got one of the first ones ever shipped to Australia, I was looking for a rifle to mount a newly aquired EOTECH sight to and my other firearms did not have a picatiny rail and the first place I turned to was Bownells and I found a new product to suit, the Weigand scope mount. So once it arrived the were not problems with mounting the rail,very straight forward and the EOTECH mated straight on with no problems apart from a little shimming under the front of the sight. Great product. Can you make one for the SSG69 and one for the SAKO 579?
Very good base mount(26.02.2012)
This is a good mount for the Ruger 77/357 and Ruger 77/44. I'd like to see was a better method for indexing the base to the receiver. Forward and back indexing is accomplished with a roll pin, laterally there is really no way to center the base on the receiver, other than carefully adjusting the mounting screws in or out. The rear of the base could be a bit longer to accomodate the Weaver style rings. A weaver ring will overhang the back of the base by about an eighth of an inch.