Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

EGW
SAKO TRG LA STEEL ULTIMATE DUTY PICATINNY SCOPE MOUNT

841370113712 296000774
These mounts are a customer overrun and have recoil lugs integrated. These are not dovetail scope mounts. Your gun must be drilled and tapped for this scope mount to work. This scope mount comes with Hex Head Metric 3.5 X .6 screws. These bases sit at approximately 0.35"" high and is not recommended for use with quick disconnect rings, due to the valley down the center. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002"". After machining; the mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish. This mount is only available in 20 MOA -for shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW HD Scope Rings to make it a complete package! Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
149.9 149.9 1 CHF
N. prodotto: 296000774
EGW SAKO TRG LA 1-PIECE PICATINNY BASE 20 MOA
Parti Fabbricante: 86812 841370113712
149.9 CHF 0 CHF 149.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Sako Colore: Black Elevation: 20 MOA Materiale: Acciaio Modello: TRG Numero di basi: 1 pezzo Tipo: Picatinny Rail Tipo di azione: Long

Caratteristiche

Adatto per: Sako Colore: Black Elevation: 20 MOA Materiale: Acciaio Modello: TRG Numero di basi: 1 pezzo Tipo: Picatinny Rail Tipo azione: Long Peso della spedizione: 0.176kg UPC : 841370113712

Dettagli dell'elemento

Made in Usa




These mounts are a customer overrun and have recoil lugs integrated. These are not dovetail scope mounts. Your gun must be drilled and tapped for this scope mount to work. This scope mount comes with Hex Head Metric 3.5 X .6 screws. These bases sit at approximately 0.35"" high and is not recommended for use with quick disconnect rings, due to the valley down the center. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002"". After machining; the mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish. This mount is only available in 20 MOA -for shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW HD Scope Rings to make it a complete package! Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).