TIMNEY
SAVAGE ACCUTRIGGER TRIGGER

081950006380 883000046

The Timney Featherweight Triggers for Savage Accutriggers are precision machined and hand-fitted to provide a crisp trigger pull. They feature a lightweight alloy housing with machined and hardened steel working surfaces. The trigger is fully adjustable. The trigger pull weight is adjustable from 1.5 to 4lbs. and is adjustable for creep and overtravel. Adjustable Pull weight 1.5-4lbs. Minor fitting may be required

SPECS: Fits Savage Accutrigger rifles. Will not work on the Savage A17 rifle and Accutrigger. Adjustable from 1.5-4lbs.

Altro...

I grilli Timney Featherweight per Savage Accutriggers sono realizzati con precisione e adattati a mano per fornire un'azione del grilletto netta. Presentano un alloggiamento in lega leggera con superfici di lavoro in acciaio lavorato e indurito. Il grilletto è completamente regolabile. Il peso del grilletto è regolabile da 1.5 a 4lbs e può essere regolato per il creep e l'overtravel. Peso del grilletto regolabile da 1.5 a 4lbs. Potrebbe essere necessaria una leggera adattamento.

SPECIFICHE: Compatibile con i fucili Savage Accutrigger. Non funzionerà con il fucile Savage A17 e Accutrigger. Regolabile da 1.5 a 4lbs.

Altro...

Punteggi dei clienti per TIMNEY SAVAGE ACCUTRIGGER TRIGGER

Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4

Don't wait buy one! (08.02.2013)

Installed this trigger in a Savage Lightweight Hunter. It required a little dremel work inside the stock to allow full trigger travel. This was done were the rear of the trigger sits. The difference between this trigger and the factory trigger was night and day. Make sure you follow the directions on the adjustment of this trigger to prevent an unsafe condition. Be sure to test it many times before loading. It's more than worth the money and pretty easy to install. I would definitely buy another if I had another accutrigger rifle.

Better than Factory (05.02.2018)

I had trouble adjusting my Timney Trigger 638 in my Savage 16 LWH (with Accutrigger). The firing pin would release when I closed the bolt. I fixed it by screwing the sear screw out to a half turn from firing-pin-release instead of the 1/6 turn as instructed. Also, I screwed the safety setscrew in until I felt resistance, then I backed it out by 1/4 turns until the safety started working correctly.

I also modified the rear trigger guard screw mounting boss molded into the Savageâs stock to allow adjustment of the trigger pull force with the barrel and trigger mounted to the stock. I took about 1/8â off the top of the boss to clear the trigger pull force adjustment screw.

There was interference between the Timney trigger and the top of the Savage trigger guard, keeping the pull force from being consistent. I removed the Timney trigger and ground clearance on the bottom front corner of the Timney trigger and shortened the sear screw by 0.050â allowing it to be a little below flush (and not interfere) when correctly adjusted, and polished the business end of the setscrew. All now works well, including a consistent pull force of 1.2 pounds. Much better than the factory trigger.

Read before you start (15.05.2018)

I wish I had read Tom's review before I started. I wound up doing all the same things to get around obstacles in the stock, but I sure could have saved some time if didn't have to figure out the problems for myself. I rated the trigger accordingly. I think Timney could have done a little research and prevented the problems. Shorter adjustment screws, angle the front of the trigger on the trigger guard side to avoid the bolt release, etc.

FITTING REQUIRED (26.08.2018)

Plan to do some Dremel work on the stock for clearance. Otherwise easy to install and better than factory. See other reviews.

Leggi più recensioni su brownells.com

259.9 259.9 1 CHF

N. prodotto: 883000046
TIMNEY SAVAGE ACCUTRIGGER TRIGGER
Parti Fabbricante: 638 081950006380 I grilli Timney Featherweight per Savage Accutriggers sono realizzati con precisione e adattati a mano per fornire un'azione del grilletto netta. Presentano un alloggiamento in lega leggera con superfici di lavoro in acciaio lavorato e indurito. Il grilletto è completamente regolabile. Il peso del grilletto è regolabile da 1.5 a 4lbs e può essere regolato per il creep e l'overtravel. Peso del grilletto regolabile da 1.5 a 4lbs. Potrebbe essere necessaria una leggera adattamento.

259.9 CHF 9 CHF 259.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Savage Arms Modello: Universal Rifles Tipo: Regolabili

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Grilletto Timney Featherweight per Savage Accutriggers, progettato per un grilletto netto.
Alloggiamento in lega leggera con superfici di lavoro in acciaio lavorato e temprato.
Regolabile da 1.5 a 4lbs, con possibilità di regolazione per creep e overtravel.

Caratteristiche

Adatto per: Savage Arms Modello: Universal Rifles Tipo: Regolabili Peso della spedizione: 0.068kg Altezza di spedizione: 14mm Larghezza di spedizione: 80mm Lunghezza di spedizione: 108mm UPC : 081950006380