Drop-in, dual sided selectors for fn SCAR family Compatible w/ military MK16 & MK17 Compatible with semi-auto scar 16s & 17s Direct replacement of OEM selectors Requires no permanent modification to weapon Simple install using existing screw
Altro...
Selettori a doppio lato plug-and-play per la famiglia FN SCAR Compatibili con i militari MK16 e MK17 Compatibili con SCAR 16S e 17S semi-automatici Sostituzione diretta dei selettori OEM Non richiede modifiche permanenti all'arma Installazione semplice utilizzando la vite esistente
Altro...
Punteggi dei clienti per MAGPUL SSG SAFETY SELECTOR SET FOR FN SCAR MK16/16S/17S BLACK
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.3
Not mandatory for the SCAR(23.09.2011)
Magpul SSG â FN SCAR Safety Selector
My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.
The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.
Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.
Great idea, but not a must-have(23.09.2011)
My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.
The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.
Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.
Problem/Solution(25.01.2012)
Problem: The factory manufactures the rifle with two diffrent sizes of selector levers. I like them both to be the same size and I prefer the longer levers. Solution: I ordered a set and mounted the long lever. Then I had a factory lever and an aftermarket lever. So I ordered a second set and installed the long lever on the other side. In hind sight I should have ordered a second long lever from FN. Oh well, what can I say. Either way I like the levers. The fit and finish is excellent.
EXCELLENT addition, minor fitting needed(02.11.2012)
THese switches are an excellent addition to your SCAR. A primary issue of concern with the SCAR is the difficulty in employing the stock switches with one hand, especially with regard to Real-World use, and dynamic relaod drills. The stock switches ar fairoly stiff, and VERY difficult to properly enage with one hand (i.e. the FIRING Hand.) These simple levers GREATLY Assist with this problem. Their grip ridges, as well as their greater length, offer better tactile input, as well as SIGNIFICANTLY greater leverage and ease of fire control employment by their user. I would say that they alleviate 85-90% of the stock issue. Additionaly, they look and feel great.
Cons: in order to properly fit them, I had to drill the stock screw hole all the way through. THis offered me better fitment and snag free employment. This was a relatively minor issue, and was strictly based on personal preference. IN order to accomplish this, simply take a small drill bit, and run it through the exiting screw hole until it comes out the other side.
Overall: a SIMPLE, EASY, CHEAP upgrade. WELL WORTH IT
N. prodotto: 100007108 MAGPUL SSG SAFETY SELECTOR SET FOR FN SCAR MK16/16S/17S BLACK Parti Fabbricante: MAG499-BLK873750004990 Selettori a doppio lato plug-and-play per la famiglia FN SCAR Compatibili con i militari MK16 e MK17 Compatibili con SCAR 16S e 17S semi-automatici Sostituzione diretta dei selettori OEM Non richiede modifiche permanenti all'arma Installazione semplice utilizzando la vite esistente
Selettori a doppio lato, facili da installare, per la famiglia FN SCAR.
Compatibili con i modelli militari MK16 e MK17 e i modelli semi-automatici SCAR 16S e 17S.
Installazione semplice utilizzando la vite esistente, senza modifiche permanenti all'arma.
Caratteristiche
Adatto per:
FN
Modello:
SCAR
Peso della spedizione: 0.023kgAltezza di spedizione: 10mmLarghezza di spedizione: 108mmLunghezza di spedizione: 191mm
UPC
: 873750004990
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Migliora la tua FN SCAR con il set di selettori MAGPUL SSG. 🔧 Facile installazione e compatibilità con MK16/17. Sostituzione diretta senza modifiche.
Drop-in, dual sided selectors for fn SCAR family Compatible w/ military MK16 & MK17 Compatible with semi-auto scar 16s & 17s Direct replacement of OEM selectors Requires no permanent modification to weapon Simple install using existing screw
Altro...
Selettori a doppio lato plug-and-play per la famiglia FN SCAR Compatibili con i militari MK16 e MK17 Compatibili con SCAR 16S e 17S semi-automatici Sostituzione diretta dei selettori OEM Non richiede modifiche permanenti all'arma Installazione semplice utilizzando la vite esistente
Altro...
Punteggi dei clienti per MAGPUL SSG SAFETY SELECTOR SET FOR FN SCAR MK16/16S/17S BLACK
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.3
Not mandatory for the SCAR(23.09.2011)
Magpul SSG â FN SCAR Safety Selector
My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.
The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.
Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.
Great idea, but not a must-have(23.09.2011)
My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.
The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.
Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.
Problem/Solution(25.01.2012)
Problem: The factory manufactures the rifle with two diffrent sizes of selector levers. I like them both to be the same size and I prefer the longer levers. Solution: I ordered a set and mounted the long lever. Then I had a factory lever and an aftermarket lever. So I ordered a second set and installed the long lever on the other side. In hind sight I should have ordered a second long lever from FN. Oh well, what can I say. Either way I like the levers. The fit and finish is excellent.
EXCELLENT addition, minor fitting needed(02.11.2012)
THese switches are an excellent addition to your SCAR. A primary issue of concern with the SCAR is the difficulty in employing the stock switches with one hand, especially with regard to Real-World use, and dynamic relaod drills. The stock switches ar fairoly stiff, and VERY difficult to properly enage with one hand (i.e. the FIRING Hand.) These simple levers GREATLY Assist with this problem. Their grip ridges, as well as their greater length, offer better tactile input, as well as SIGNIFICANTLY greater leverage and ease of fire control employment by their user. I would say that they alleviate 85-90% of the stock issue. Additionaly, they look and feel great.
Cons: in order to properly fit them, I had to drill the stock screw hole all the way through. THis offered me better fitment and snag free employment. This was a relatively minor issue, and was strictly based on personal preference. IN order to accomplish this, simply take a small drill bit, and run it through the exiting screw hole until it comes out the other side.
Overall: a SIMPLE, EASY, CHEAP upgrade. WELL WORTH IT
Aiuto e contatti
Newsletter
Visualizzazione classica
Visualizzazione mobile