Side mounting keeps the triggerguard out where you can grab it faster. Gun lays flat against the body, rides easier on your shoulder. Installs underneath the magazine cap; ball detent locks mount in place. Accepts up to 1-¼" wide slings.
Il montaggio laterale mantiene il grilletto in una posizione facilmente accessibile. L'arma giace piatta contro il corpo, rendendo più facile il trasporto sulla spalla. Si installa sotto il tappo del caricatore; il detent a sfera blocca il supporto in posizione. Accetta slings larghe fino a 1-¼".
Punteggi dei clienti per SCATTERGUN TECHNOLOGY LEFT SIDE SLING
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3
great addition to your gun!(30.06.2011)
Installed easily, locked firmly in place, and provides a sturdy mount for your sling. recommended for 3 point slings on more combat-oriented shotguns, but equally at place on a field gun. parkerization matches the rest of my weapon, and is evenly distributed. a must for the tactical minded shooter, home defense shooter, or anyone looking to mount a sling on the weapon.
Compromised Bbl Retention(16.08.2012)
They're made nicely. However, we ditched these sling mounts because they fit between the mag cap and the barrel's magazine ring. These mounts are thick enough to take up some of the threading, leaving only 2-3 threads of the magazine tube to hold the barrel in place. Many of our sworn shotgunners just don't take the time to crank that mag cap down nice and tight, so we had barrels come loose during range - and literally fall off the gun.
We went to a swivel system that mounts to an eyelet on the endcap instead.
Sturdy but too thick (25.04.2017)
This appears to be machined from steel and is very well made, but it is a little too thick then is really needed. This could be a detriment to properly toghtening down the barrel as it takes up a lot of of barrel threads so it is possible the barrel nut could loosen up and fall off. If they reduced the thickness of this mount in half then it would be much better. I was going to mount it on my 870 tactical.
N. prodotto: 800100005 SCATTERGUN TECHNOLOGY LEFT SIDE SLING Parti Fabbricante: SGSMPS870874218003548 Il montaggio laterale mantiene il grilletto in una posizione facilmente accessibile. L'arma giace piatta contro il corpo, rendendo più facile il trasporto sulla spalla. Si installa sotto il tappo del caricatore; il detent a sfera blocca il supporto in posizione. Accetta slings larghe fino a 1-¼".
27.9CHF0CHF 27.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: RemingtonColore: BlackMateriale: AcciaioModello: 870Tipo: Shotgun Mount
Il montaggio laterale consente un accesso rapido al grilletto.
Design piatto per un trasporto agevole sulla spalla.
Compatibile con slings larghe fino a 1-¼".
Caratteristiche
Adatto per:
Remington
Colore:
Black
Materiale:
Acciaio
Modello:
870
Tipo:
Shotgun Mount
Peso della spedizione: 0.023kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
UPC
: 874218003548
Dettagli dell'elemento
Made in Usa
Scopri il montaggio laterale SCATTERGUN per Remington! ✨ Facile da installare e trasportare, è perfetto per slings fino a 1-¼".
Side mounting keeps the triggerguard out where you can grab it faster. Gun lays flat against the body, rides easier on your shoulder. Installs underneath the magazine cap; ball detent locks mount in place. Accepts up to 1-¼" wide slings.
Il montaggio laterale mantiene il grilletto in una posizione facilmente accessibile. L'arma giace piatta contro il corpo, rendendo più facile il trasporto sulla spalla. Si installa sotto il tappo del caricatore; il detent a sfera blocca il supporto in posizione. Accetta slings larghe fino a 1-¼".
Punteggi dei clienti per SCATTERGUN TECHNOLOGY LEFT SIDE SLING
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3
great addition to your gun!(30.06.2011)
Installed easily, locked firmly in place, and provides a sturdy mount for your sling. recommended for 3 point slings on more combat-oriented shotguns, but equally at place on a field gun. parkerization matches the rest of my weapon, and is evenly distributed. a must for the tactical minded shooter, home defense shooter, or anyone looking to mount a sling on the weapon.
Compromised Bbl Retention(16.08.2012)
They're made nicely. However, we ditched these sling mounts because they fit between the mag cap and the barrel's magazine ring. These mounts are thick enough to take up some of the threading, leaving only 2-3 threads of the magazine tube to hold the barrel in place. Many of our sworn shotgunners just don't take the time to crank that mag cap down nice and tight, so we had barrels come loose during range - and literally fall off the gun.
We went to a swivel system that mounts to an eyelet on the endcap instead.
Sturdy but too thick (25.04.2017)
This appears to be machined from steel and is very well made, but it is a little too thick then is really needed. This could be a detriment to properly toghtening down the barrel as it takes up a lot of of barrel threads so it is possible the barrel nut could loosen up and fall off. If they reduced the thickness of this mount in half then it would be much better. I was going to mount it on my 870 tactical.