Wooden Handles, Heavy Square Shanks Help Produce A Professional Job
Made from keystone hardened tool steel. Sides of bit tip are made parallel for short distance toward shank for better -- more consistent fit to help prevent mars and dings in and around the screw slot. Features square shank; hardened tips; square, hardwood handle and nickel-plated ferrule. Made in the USA, guaranteed not to break or chip. Your choice: set of 8 or by the each -- for when you need just one or when you want to keep one specially ground for a particular job.
SPECS: Set of 8 comes with vinyl pouch or individual screwdrivers available. Wooden handles. Rockwell C52-56.
Altro...
Manici in Legno, Gambi Quadrati Pesanti Aiutano a Realizzare un Lavoro Professionale
Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
SPECIFICHE: Set di 8 con borsa in vinile o cacciaviti singoli disponibili. Manici in legno. Rockwell C52-56.
Altro...
Punteggi dei clienti per GRACE USA G3 SCREWDRIVER, .160" WIDE, .031" THICK, 5.5" LONG
Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 4.7
Amazing good quality @ reasonable price(06.01.2014)
I bought the one screwdriver for a particular project and now I wish I had bought the entire set (I hate to pay those shipping charges so I bundle items in an order). As good as the old school Mac screwdrivers with the added benefit of the parallel grind on the tip.
Grace 8 Piece Screwdriver Set(20.09.2009)
I use these screwdrivers strictly for working on my firearms and nothing else. The thing I like best about them is they fit the screws perfectly, and with the large handles I can apply the necessary torque to remove some of the stuborn overly tight screws.
I'm buying this again....(20.10.2009)
Bought my first set of Grace screwdrivers 44 years ago, and I just placed my second order for an 8-piece set and the Special "Handgun" set. I still have several of my original set in my over-the-bench rack, and I'm only ordering replacements for what I have literally used up over the years. They can be ground to exactly fit any screw needed, unlike cheap drivers, as the bits are through-hardened The handles of my originals have NEVER loosened up, no matter how hard they were twisted, and the square shank is perfect for using a tiny 3" adjustable wrench for those rusted-in "headaches" while leaning on the handle end. The fixed blades are more rigid than any changable bit driver can ever be. If a gunsmith doesn't have a well-worn set of Graces' over their bench, (in addition to the fancy replacable bit drivers), you better not leave your gun there. I have every set of "Professional" replaceble bit drivers on the market. What do I grab first on S&W Sideplates, SAs' and S X S s'? Guess!!A more perfect screwdriver for gun use I cannot imagine. (Now, if GRACE would make some fancy-handled "turnscrews" for replacing those missing ones in the cased doubles I work on....)
Great Value [...](23.07.2010)
I'm a professional gunsmith and use these screwdrivers on a daily basis. They just feel great in the hand and are very well made. I finally managed to break one with a very stubborn Browning A5 screw. Called the folks up with the dimensions and they are sending me a new one - no charge, didn't even have to return the old one (I'll re-grind it for that "special screw" that will inevitably pop up).
The Best(17.12.2011)
I have used these screwdrivers for many years and have only had one tip break on an extra stubborn screw. Grace replaced it at no charge even though it wasn't really the fault of the tool. I bought a second set as a Christmas gift for my grandson. I also have an interchangeable bit set I carry to the range, but when in the shop I only use the Grace screw drivers. Just a great American-Made product.
The Best you can buy(30.03.2013)
These are just pure quality and beauty. Fit perfectly in gun screws so you don't destroy irreplaceable screws, like on my Model 92 I bought these for. Some of the screws where not ready to be removed, even after a soaking in Kroil, but these where though enough for the job at hand. Tools like these make you proud to be an American and see there is still true pride in craftsmanship here. Buy once, cry once. I love them so much I almost don't want to mess them up by using them, almost...
GRACE screw drivers are the best!(27.09.2014)
These drivers can be used in just about anything that has slotted screws. The set has a great selection of sizes and completes the woodworkers set that I already have. Things that are great about all Grace drivers are: The hollow ground hardened tips (extremely accurate); The very comfortable wood handles (carefully finished); The well balanced overall design; The guarantee is as it should be; The price is very reasonable for the excellent quality.
What's not to like? Nothing.
Why did I wait? These are a must have. (09.05.2016)
These are excellent. The parallel ground tip is a must for straight slot machine screws used on most firearms. I use these on sight screws, grip panels, scope mounts and rifle action screws. This set is perfect and I have yet to slip out or damage a screw head, even a little, with this set. Generally, I prefer switching action screws to allen head socket head cap screws. However, this adds up, rifle after rifle. This set removes the anxiety of action screw removal, and costs less then replacing all action your screws with allen heads.
Blades are too thick!(10.05.2016)
I purchased a set of these Grace screwdrivers because I wanted a nice set for working on firearms. The problem is the blades are far too thick to use on firearm screws. You almost always have to use an undersized screwdriver to find one with a blade thin enough to use on a firearm. I find myself getting out a file and re-shaping the blades.
I would not recommend.
Best screw drivers on the market.(26.10.2017)
Gunsmithing on older firearms. Well made of durable materials. They don't fit some of older firearms in 100 to 200 year old range.
The best there is(29.08.2018)
Started gunsmithing as a hobby in 1970. Thatâs the date on my first FFL, which I have framed as a momento on my shop wall. I bought my first set of Grace screwdrivers that year. I kept it up as a sideline till I retired in 2012 when I opened my shop full time. Iâve worked on and built thousands of fine firearms since 1970, and I use those Grace screwdrivers every day. Iâve added to the basic set, ( got about 20 âadd-onsâ fitted to special screws, all Grace, in the rack(s) now). Iâve re-ground several many times, and I fit them to the slots Iâm needing on a daily basis. Some Iâve replaced as Iâve re-ground them past their useful limits, but Iâve never had one fail me. The best there is. Period
N. prodotto: 354008008 GRACE USA G3 SCREWDRIVER, .160" WIDE, .031" THICK, 5.5" LONG Parti Fabbricante: G3731940899996 Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
15.9CHF14CHF 15.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Realizzato in acciaio per utensili indurito keystone con punte indurite per una migliore aderenza.
Disponibile come set di 8 con custodia in vinile o singolarmente, con manici in legno duro.
Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi, con spessore lama di .031".
Caratteristiche
Spessore della lama:
.031
Peso della spedizione: 0.018kgAltezza di spedizione: 3mmLarghezza di spedizione: 84mmLunghezza di spedizione: 203mm
UPC
: 731940899996
Dettagli dell'elemento
Made in Usa
N. prodotto: 354008000 GRACE USA GRACE EIGHT-SCREWDRIVER SET Parti Fabbricante: HG-8731940888884 Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
89.9CHF13CHF 89.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354008001 GRACE USA N3 SCREWDRIVER, .315" WIDE, .041" THICK, 9.25" LONG Parti Fabbricante: N3731940866660 Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
16.9CHF14CHF 16.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354008002 GRACE USA N2 SCREWDRIVER, .300" WIDE, .037" THICK, 4" LONG Parti Fabbricante: N2731940855558 Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
15.9CHF6CHF 15.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354008003 GRACE USA H3 SCREWDRIVER, .190" WIDE, .038" THICK, 7.5" LONG Parti Fabbricante: H3731940833334 Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
16.9CHF16CHF 16.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354008004 GRACE USA N4 SCREWDRIVER, .375" WIDE, .049" THICK, 9.50" LONG Parti Fabbricante: N4731940811110 Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
16.9CHF18CHF 16.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354008005 GRACE USA H2 SCREWDRIVER, .195" WIDE, .032" THICK, 6.25" LONG Parti Fabbricante: H2731940822222 Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
15.9CHF8CHF 15.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354008006 GRACE USA G2 SCREWDRIVER, .125" WIDE, .025" THICK, 4.5" LONG Parti Fabbricante: G2731940877772 Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
16.9CHF18CHF 16.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354008007 GRACE USA H4 SCREWDRIVER, .235" WIDE, .044" THICK, 8.5" LONG Parti Fabbricante: H4731940844446 Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
15.9CHF14CHF 15.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Wooden Handles, Heavy Square Shanks Help Produce A Professional Job
Made from keystone hardened tool steel. Sides of bit tip are made parallel for short distance toward shank for better -- more consistent fit to help prevent mars and dings in and around the screw slot. Features square shank; hardened tips; square, hardwood handle and nickel-plated ferrule. Made in the USA, guaranteed not to break or chip. Your choice: set of 8 or by the each -- for when you need just one or when you want to keep one specially ground for a particular job.
SPECS: Set of 8 comes with vinyl pouch or individual screwdrivers available. Wooden handles. Rockwell C52-56.
Altro...
Manici in Legno, Gambi Quadrati Pesanti Aiutano a Realizzare un Lavoro Professionale
Realizzato in acciaio per utensili indurito keystone. I lati della punta del bit sono paralleli per una breve distanza verso il gambo, per una vestibilità migliore e più costante, aiutando a prevenire graffi e ammaccature nella fessura della vite. Caratteristiche: gambo quadrato; punte indurite; manico in legno duro quadrato e ferula nichelata. Prodotto negli Stati Uniti, garantito per non rompersi o scheggiarsi. La tua scelta: set di 8 o singolarmente -- per quando hai bisogno solo di uno o quando vuoi tenerne uno appositamente affilato per un lavoro particolare.
SPECIFICHE: Set di 8 con borsa in vinile o cacciaviti singoli disponibili. Manici in legno. Rockwell C52-56.
Altro...
Punteggi dei clienti per GRACE USA G3 SCREWDRIVER, .160" WIDE, .031" THICK, 5.5" LONG
Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 4.7
Amazing good quality @ reasonable price(06.01.2014)
I bought the one screwdriver for a particular project and now I wish I had bought the entire set (I hate to pay those shipping charges so I bundle items in an order). As good as the old school Mac screwdrivers with the added benefit of the parallel grind on the tip.
Grace 8 Piece Screwdriver Set(20.09.2009)
I use these screwdrivers strictly for working on my firearms and nothing else. The thing I like best about them is they fit the screws perfectly, and with the large handles I can apply the necessary torque to remove some of the stuborn overly tight screws.
I'm buying this again....(20.10.2009)
Bought my first set of Grace screwdrivers 44 years ago, and I just placed my second order for an 8-piece set and the Special "Handgun" set. I still have several of my original set in my over-the-bench rack, and I'm only ordering replacements for what I have literally used up over the years. They can be ground to exactly fit any screw needed, unlike cheap drivers, as the bits are through-hardened The handles of my originals have NEVER loosened up, no matter how hard they were twisted, and the square shank is perfect for using a tiny 3" adjustable wrench for those rusted-in "headaches" while leaning on the handle end. The fixed blades are more rigid than any changable bit driver can ever be. If a gunsmith doesn't have a well-worn set of Graces' over their bench, (in addition to the fancy replacable bit drivers), you better not leave your gun there. I have every set of "Professional" replaceble bit drivers on the market. What do I grab first on S&W Sideplates, SAs' and S X S s'? Guess!!A more perfect screwdriver for gun use I cannot imagine. (Now, if GRACE would make some fancy-handled "turnscrews" for replacing those missing ones in the cased doubles I work on....)
Great Value [...](23.07.2010)
I'm a professional gunsmith and use these screwdrivers on a daily basis. They just feel great in the hand and are very well made. I finally managed to break one with a very stubborn Browning A5 screw. Called the folks up with the dimensions and they are sending me a new one - no charge, didn't even have to return the old one (I'll re-grind it for that "special screw" that will inevitably pop up).
The Best(17.12.2011)
I have used these screwdrivers for many years and have only had one tip break on an extra stubborn screw. Grace replaced it at no charge even though it wasn't really the fault of the tool. I bought a second set as a Christmas gift for my grandson. I also have an interchangeable bit set I carry to the range, but when in the shop I only use the Grace screw drivers. Just a great American-Made product.
The Best you can buy(30.03.2013)
These are just pure quality and beauty. Fit perfectly in gun screws so you don't destroy irreplaceable screws, like on my Model 92 I bought these for. Some of the screws where not ready to be removed, even after a soaking in Kroil, but these where though enough for the job at hand. Tools like these make you proud to be an American and see there is still true pride in craftsmanship here. Buy once, cry once. I love them so much I almost don't want to mess them up by using them, almost...
GRACE screw drivers are the best!(27.09.2014)
These drivers can be used in just about anything that has slotted screws. The set has a great selection of sizes and completes the woodworkers set that I already have. Things that are great about all Grace drivers are: The hollow ground hardened tips (extremely accurate); The very comfortable wood handles (carefully finished); The well balanced overall design; The guarantee is as it should be; The price is very reasonable for the excellent quality.
What's not to like? Nothing.
Why did I wait? These are a must have. (09.05.2016)
These are excellent. The parallel ground tip is a must for straight slot machine screws used on most firearms. I use these on sight screws, grip panels, scope mounts and rifle action screws. This set is perfect and I have yet to slip out or damage a screw head, even a little, with this set. Generally, I prefer switching action screws to allen head socket head cap screws. However, this adds up, rifle after rifle. This set removes the anxiety of action screw removal, and costs less then replacing all action your screws with allen heads.
Blades are too thick!(10.05.2016)
I purchased a set of these Grace screwdrivers because I wanted a nice set for working on firearms. The problem is the blades are far too thick to use on firearm screws. You almost always have to use an undersized screwdriver to find one with a blade thin enough to use on a firearm. I find myself getting out a file and re-shaping the blades.
I would not recommend.
Best screw drivers on the market.(26.10.2017)
Gunsmithing on older firearms. Well made of durable materials. They don't fit some of older firearms in 100 to 200 year old range.
The best there is(29.08.2018)
Started gunsmithing as a hobby in 1970. Thatâs the date on my first FFL, which I have framed as a momento on my shop wall. I bought my first set of Grace screwdrivers that year. I kept it up as a sideline till I retired in 2012 when I opened my shop full time. Iâve worked on and built thousands of fine firearms since 1970, and I use those Grace screwdrivers every day. Iâve added to the basic set, ( got about 20 âadd-onsâ fitted to special screws, all Grace, in the rack(s) now). Iâve re-ground several many times, and I fit them to the slots Iâm needing on a daily basis. Some Iâve replaced as Iâve re-ground them past their useful limits, but Iâve never had one fail me. The best there is. Period