Restaure les canons et les chokes à une finition neuve ou meilleure
Large gamme pour le calibre 28 à 12, le Flex-drive élimine les vibrations et les éraflures.
SPÉCIFICATIONS : arbre de diamètre 0.260-0.270” (6.604mm-6.858mm), longueur de 8-½” (21.6cm).
Plus...
Évaluations client de LISLE CORPORATION NO. 2-S STONES, ONLY
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 4.5
Works great!!(19.04.2010)
I got my 870's chamber smoothed out with this hone and now feeding and extraction is much smoother. I also halve a lot less problems shooting Winchester 100 Round Value Packs through it now after honing my chamber. Great product!!
Good, Inexpensive Cylinder Hone(11.11.2014)
I purchased this hone, with an extra set of stones, to remove pitting from the barrel of an almost ninety year single-shot 12 gauge shotgun. The shotgun was left to me by an uncle, who had kept it by his kitchen door for over 60 years. He had also fired it, on occasions, well into his nineties. But, it was apparent he had stopped cleaning it properly at some point in his later years.
It took some hours of careful honing, but I was able to remove the pitting and return the barrel to a safe operating condition using this hone. Since everything was so worn, and in such bad shape, and this was not an expensive antique, I returned the shotgun to it's original appearance and usefulness - the condition I remembered it being in as a youngster. I take pleasure in knowing my uncle would be pleased with the condition of his old shotgun as it is now. This inexpensive hone made the restoration possible without spending more than the shotgun was worth in dollars. The shotgun now sits unused, but the memories of my uncle have been preserved in it, and it sits proudly in my gun cabinet - ready for use if ever needed, and just the way I know my uncle would have wanted.
Référence: 531107602 LISLE CORPORATION NO. 2-S STONES, ONLY Ref Fabricant: 10760083045107606 Large gamme pour le calibre 28 à 12, le Flex-drive élimine les vibrations et les éraflures.
12.9CHF43CHF 12.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Manufacture: Universel Fusil de Chasse
Manufacture:
Universel Fusil de Chasse
Poids du colis: 0.045kgHauteur d'expédition: 8mmLargeur d'expédition: 79mmLongueur d'expédition: 109mm
UPC
: 083045107606
Détails de l'article
Fabriqué au USA
Référence: 531108002 LISLE CORPORATION NO. 2 BARREL HONE Ref Fabricant: 10800083045108009 Large gamme pour le calibre 28 à 12, le Flex-drive élimine les vibrations et les éraflures.
29.9CHF17CHF 29.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Manufacture: Universel Fusil de Chasse
Restaure les canons et les chokes à une finition neuve ou meilleure
Large gamme pour le calibre 28 à 12, le Flex-drive élimine les vibrations et les éraflures.
SPÉCIFICATIONS : arbre de diamètre 0.260-0.270” (6.604mm-6.858mm), longueur de 8-½” (21.6cm).
Plus...
Évaluations client de LISLE CORPORATION NO. 2-S STONES, ONLY
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 4.5
Works great!!(19.04.2010)
I got my 870's chamber smoothed out with this hone and now feeding and extraction is much smoother. I also halve a lot less problems shooting Winchester 100 Round Value Packs through it now after honing my chamber. Great product!!
Good, Inexpensive Cylinder Hone(11.11.2014)
I purchased this hone, with an extra set of stones, to remove pitting from the barrel of an almost ninety year single-shot 12 gauge shotgun. The shotgun was left to me by an uncle, who had kept it by his kitchen door for over 60 years. He had also fired it, on occasions, well into his nineties. But, it was apparent he had stopped cleaning it properly at some point in his later years.
It took some hours of careful honing, but I was able to remove the pitting and return the barrel to a safe operating condition using this hone. Since everything was so worn, and in such bad shape, and this was not an expensive antique, I returned the shotgun to it's original appearance and usefulness - the condition I remembered it being in as a youngster. I take pleasure in knowing my uncle would be pleased with the condition of his old shotgun as it is now. This inexpensive hone made the restoration possible without spending more than the shotgun was worth in dollars. The shotgun now sits unused, but the memories of my uncle have been preserved in it, and it sits proudly in my gun cabinet - ready for use if ever needed, and just the way I know my uncle would have wanted.