The Sinclair Offset Scope Level has a unique offset design that allows the shooter to see the level while still behind the scope. The offset level attaches to the riflescope like a scope ring and can be positioned so the shooter can see it easily. The Sinclair Scope Level helps the shooter avoid loss of accuracy resulting from positioning (canting) the rifle differently each time. The machined aluminum Sinclair Offset Scope Level is available for 1 inch and 30 mm scope tubes. Available in matte black and satin silver finishes. The Sinclair Offset Scope Level can be mounted for use by right-hand or left-hand shooters.
Altro...
Il livello di mira offset Sinclair ha un design unico a offset che consente al tiratore di vedere il livello mentre è ancora dietro il mirino. Il livello offset si attacca al cannocchiale come un anello di mira e può essere posizionato in modo che il tiratore possa vederlo facilmente. Il livello di mira Sinclair aiuta il tiratore ad evitare la perdita di precisione derivante dal posizionamento (canting) del fucile in modo diverso ogni volta. Il livello di mira offset Sinclair, realizzato in alluminio lavorato, è disponibile per tubi di mira da 1 pollice e 30 mm. Disponibile nelle finiture nero opaco e argento satinato. Il livello di mira offset Sinclair può essere montato per l'uso da tiratori destrimani o mancini.
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL 1" OFFSET SCOPE LEVEL MATTE BLACK
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4.7
Good product(24.02.2011)
Nice add on for target/competitive shooting,good fit,offset easier to see.
Excellent product Have three of these.(21.04.2011)
On bench rest Cooper 204 ruger. Easy to see. Works well in the field for hunting also!
Well worth it(18.01.2012)
Solid construction, allows you to look through the scope with one eye and still see the level with the other.
"Simple yet effective"(08.07.2012)
I use this on a 6.5 x 20 scope for long range target and varmint shooting. This simple device assists in keeping scope level, thus increasing accuracy by consistant level of reticle (decreasing cant). It does take a few minutes to get bubble level with reticle and gun. At the range, since installing, I have seen a marked decrease in bullet group size.
Nice, well made level(13.03.2014)
Solid construction and well made. Would be nice if someone could design one with the screws on top. Only issue was when I initially attempted to unscrew the screws it took over 65 inch-lbs of torque to loosen the screws. I actually reamed one screw head out and had to use a screw remover tool. No need to package them this tight.
Needs more off set(07.09.2014)
Simple and well made, but NO WHERE NEAR enough off set to be of use with a large scope. With my Nightforce ,something is in my line of sight no matter where I place the level on the scope. The only way I can see the level is to lift my head well off the stock, which I do not want to do. Mounting it upside down would help,but then you cannot see the bubble because it floats up and is almost completely hidden by the holder so that doesn't work. Would only recommend with reservations.
Solid Product with Unique Feature(18.11.2015)
The Sinclair Scope Level is a "best of the best" selection in my opinion. I have used other levels for military and hunting purposes but am sold on this one because it mounts low over the scope tube but has minimal but adequate offset to allow the bubble to be seen easily with the non-shooting eye with my head in place behind the scope. This design protects the level from damage (I've broken the fold out designs when forced to make a hasty move and forgetting to fold the level inward). I shoot all weapons with both eyes open for better peripheral vision and depth perception. The design of the Sinclair level allows my non shooting eye to superimpose the level into the upper right quadrant of the scope reticle without having to look around the scope or close my shooting eye. Thus, I can see the cross hairs on the target and the bubble of the level without taking my eye off the target. Shooting is faster and more accurate. I strongly recommend both the Sinclair level and this shooting technique. Mounting the level forward and to the left side as shown on the website is critical to this achieving this optical technique for a right handed shooter. Naturally, reverse the scope if shooting lefty.
N. prodotto: 749004279 SINCLAIR INTERNATIONAL 1" OFFSET SCOPE LEVEL MATTE BLACK Parti Fabbricante: 068000 Il livello di mira offset Sinclair ha un design unico a offset che consente al tiratore di vedere il livello mentre è ancora dietro il mirino. Il livello offset si attacca al cannocchiale come un anello di mira e può essere posizionato in modo che il tiratore possa vederlo facilmente. Il livello di mira Sinclair aiuta il tiratore ad evitare la perdita di precisione derivante dal posizionamento (canting) del fucile in modo diverso ogni volta. Il livello di mira offset Sinclair, realizzato in alluminio lavorato, è disponibile per tubi di mira da 1 pollice e 30 mm. Disponibile nelle finiture nero opaco e argento satinato. Il livello di mira offset Sinclair può essere montato per l'uso da tiratori destrimani o mancini.
59.9CHF6CHF 59.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Design unico che consente al tiratore di vedere il livello mentre è dietro il mirino.
Realizzato in alluminio lavorato, disponibile per tubi di mirino da 1 pollice e 30 mm.
Montabile per l'uso da tiratori destri o mancini, disponibile in nero opaco e argento satinato.
Caratteristiche
Diametro tubo:
1''
Finitura:
Nero
Peso della spedizione: 0.045kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 749004540 SINCLAIR INTERNATIONAL 30MM OFFSET SCOPE LEVEL MATTE BLACK Parti Fabbricante: 068300050806111172 Il livello di mira offset Sinclair ha un design unico a offset che consente al tiratore di vedere il livello mentre è ancora dietro il mirino. Il livello offset si attacca al cannocchiale come un anello di mira e può essere posizionato in modo che il tiratore possa vederlo facilmente. Il livello di mira Sinclair aiuta il tiratore ad evitare la perdita di precisione derivante dal posizionamento (canting) del fucile in modo diverso ogni volta. Il livello di mira offset Sinclair, realizzato in alluminio lavorato, è disponibile per tubi di mira da 1 pollice e 30 mm. Disponibile nelle finiture nero opaco e argento satinato. Il livello di mira offset Sinclair può essere montato per l'uso da tiratori destrimani o mancini.
64.9CHF15CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
The Sinclair Offset Scope Level has a unique offset design that allows the shooter to see the level while still behind the scope. The offset level attaches to the riflescope like a scope ring and can be positioned so the shooter can see it easily. The Sinclair Scope Level helps the shooter avoid loss of accuracy resulting from positioning (canting) the rifle differently each time. The machined aluminum Sinclair Offset Scope Level is available for 1 inch and 30 mm scope tubes. Available in matte black and satin silver finishes. The Sinclair Offset Scope Level can be mounted for use by right-hand or left-hand shooters.
Altro...
Il livello di mira offset Sinclair ha un design unico a offset che consente al tiratore di vedere il livello mentre è ancora dietro il mirino. Il livello offset si attacca al cannocchiale come un anello di mira e può essere posizionato in modo che il tiratore possa vederlo facilmente. Il livello di mira Sinclair aiuta il tiratore ad evitare la perdita di precisione derivante dal posizionamento (canting) del fucile in modo diverso ogni volta. Il livello di mira offset Sinclair, realizzato in alluminio lavorato, è disponibile per tubi di mira da 1 pollice e 30 mm. Disponibile nelle finiture nero opaco e argento satinato. Il livello di mira offset Sinclair può essere montato per l'uso da tiratori destrimani o mancini.
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL 1" OFFSET SCOPE LEVEL MATTE BLACK
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4.7
Good product(24.02.2011)
Nice add on for target/competitive shooting,good fit,offset easier to see.
Excellent product Have three of these.(21.04.2011)
On bench rest Cooper 204 ruger. Easy to see. Works well in the field for hunting also!
Well worth it(18.01.2012)
Solid construction, allows you to look through the scope with one eye and still see the level with the other.
"Simple yet effective"(08.07.2012)
I use this on a 6.5 x 20 scope for long range target and varmint shooting. This simple device assists in keeping scope level, thus increasing accuracy by consistant level of reticle (decreasing cant). It does take a few minutes to get bubble level with reticle and gun. At the range, since installing, I have seen a marked decrease in bullet group size.
Nice, well made level(13.03.2014)
Solid construction and well made. Would be nice if someone could design one with the screws on top. Only issue was when I initially attempted to unscrew the screws it took over 65 inch-lbs of torque to loosen the screws. I actually reamed one screw head out and had to use a screw remover tool. No need to package them this tight.
Needs more off set(07.09.2014)
Simple and well made, but NO WHERE NEAR enough off set to be of use with a large scope. With my Nightforce ,something is in my line of sight no matter where I place the level on the scope. The only way I can see the level is to lift my head well off the stock, which I do not want to do. Mounting it upside down would help,but then you cannot see the bubble because it floats up and is almost completely hidden by the holder so that doesn't work. Would only recommend with reservations.
Solid Product with Unique Feature(18.11.2015)
The Sinclair Scope Level is a "best of the best" selection in my opinion. I have used other levels for military and hunting purposes but am sold on this one because it mounts low over the scope tube but has minimal but adequate offset to allow the bubble to be seen easily with the non-shooting eye with my head in place behind the scope. This design protects the level from damage (I've broken the fold out designs when forced to make a hasty move and forgetting to fold the level inward). I shoot all weapons with both eyes open for better peripheral vision and depth perception. The design of the Sinclair level allows my non shooting eye to superimpose the level into the upper right quadrant of the scope reticle without having to look around the scope or close my shooting eye. Thus, I can see the cross hairs on the target and the bubble of the level without taking my eye off the target. Shooting is faster and more accurate. I strongly recommend both the Sinclair level and this shooting technique. Mounting the level forward and to the left side as shown on the website is critical to this achieving this optical technique for a right handed shooter. Naturally, reverse the scope if shooting lefty.