Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

LONE WOLF DIST.
SLIDE COMPLETION KITS FOR GLOCK®

639737069082 100803023

The majority of parts to build a bare slide into a complete slide. (No recoil spring or sights). Includes channel liner, spacer sleeve, marine spring cups, mid-weight striker spring, striker, LCI extractor, Spring loaded bearing, depressor plunger spring, depressor plunger, firing pin safety, firing pin safety spring, slide cover plate.

Altro...

La maggior parte dei componenti per trasformare un carrello nudo in un carrello completo. (Nessuna molla di rinculo o mirini). Include il rivestimento del canale, il manicotto di spaziatura, le coppe a molla marine, la molla del percussore di peso medio, il percussore, l'estrattore LCI, il cuscinetto a molla, la molla del plunger di depressione, il plunger di depressione, il dispositivo di sicurezza del percussore, la molla del dispositivo di sicurezza del percussore, e la piastra di copertura del carrello.

Altro...

Punteggi dei clienti per LONE WOLF DIST. M17, M19, M26, M34 & M17L COMPLETION KIT FOR 9MM SLIDES

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 2.1

Nice to have all parts needed (19.10.2016)

I bought this kit in March 2016 so that I'd have all the parts and pieces in hand once I finally bought a Lone Wolf G22 Slide. I could have bought the parts individually a little cheaper (brownells Edge member), but most of the time one or more of these parts are on back order, so it's nice to have a single bag that has all the parts I need.

The good: * The parts are high quality, * The plastics are different color than OEM so you can easily tell which gun has which parts in it, * Marine Cups (which Glock doesn't sell to civilians), * Mid-weight striker.

The bad: My kit was missing the firing pin safety spring. I poured all the parts in an empty small plastic tote so that I wouldn't lose any. When I got to installing the Firing Pin Safety in the slide, I noticed I was out of springs. Luckily I had spares from a Wolff Spring Kit for Glock, so I could complete my build. It's not worth fixing this issue with Brownells or Lone Wolf, but if you buy one of these, check it before your build to make sure you got 100% of the parts you paid for.

This is the reason I've only given this 4 stars. I would have definitely rated it 5 stars had the spring been included.

Fragile (25.08.2018)

I didn't have it for long and I was sitting around dry firing my Glock. All of a sudden, the trigger wouldn't reset and I heard a rattling noise when I shook it. I took it apart and to my surprise, the steel striker broke in half!!

Brownells was very good and sent me a replacement.

Liners were junk. (04.10.2018)

Read the skeptical reviews prior and figured maybe these other folks just had a negative outlook. Well, they are correct. I installed it all pretty easily in 15 mins. But the faceplate was a little tight to get on. Got it on, and moved on. Never shot the thing, went to pull it apart, and the liners had binded. Got them out after some cursing and replaced them with standard glock branded liners, now the slide disassembles as easy as can be. Im still using the lone wolf firing pin, and safety plunger, but the rest was pretty much replaced.

Take it from me, just buy factory glock.

some fitting required (18.05.2016)

Most of this kit worked out great, but the rear slide cover wouldnât go on, traced to a plunger that was a hair out of spec. It had to be fitted but went together with some minor sanding and filing.

Missing a part, but Brownells came thru (13.06.2017)

Parts bag came sealed from Lone Wolf missing the firing pin safety. Brownells sent a replacement safety the next day!

The remaining parts all worked appropriately, though the channel sleeve was a touch tight. A good price for the parts you get, just to get that pistol going.

Disappointing Quality (11.12.2017)

Plastic parts were crudely finished i.e. ends of channel liner required sanding/removal of excess material. Extractor was so thick it got stuck in the Polymer 80 Brand slide opening and had to be pried out & sanded down to fit. Safety plunger spring did not fit well into the plunger and the plunger didn't operate smoothly. I immediately replaced all parts (minus the liner) with Glock OEM parts. Fit & function are now perfect, so the slide definitely didn't cause the extractor or plunger problems. This was not my first experience with Glock / Polymer 80 builds, but it was my first and last purchase of Lone Wolf parts.

Hope you like light primer strikes! (14.01.2018)

The liner seemed flimsy and the spring retaining clips wouldnât allow the striker to move smoothly producing light primer strikes. This is my first Lone Wolf product so I donât know if this is to be expected or not.

Light primer strikes (17.02.2018)

This kit comes with a light striker spring for a lighter trigger pull. This resulted in a lot of light primer strikes. The channel liner is lower quality than OEM. I ended up replacing most of the parts from this kit with factory parts.

You get what you pay for (06.07.2018)

You get what you pay for. Biggest issues are that the channel liner was too large it fit in my slide and once buying another and installing it I found that the spring retention cups were also too big so I had to order more parts. It feels cheap and I am not even using it anymore. Took too much time to figure this out to return everything, unfortunately. Spend the money on quality, not this.

Leggi più recensioni su brownells.com

139.9 144.9 2 CHF

N. prodotto: 100803023
LONE WOLF DIST. M17, M19, M26, M34 & M17L COMPLETION KIT FOR 9MM SLIDES
Parti Fabbricante: LWD-SLIDEKIT-9 639737069082 La maggior parte dei componenti per trasformare un carrello nudo in un carrello completo. (Nessuna molla di rinculo o mirini). Include il rivestimento del canale, il manicotto di spaziatura, le coppe a molla marine, la molla del percussore di peso medio, il percussore, l'estrattore LCI, il cuscinetto a molla, la molla del plunger di depressione, il plunger di depressione, il dispositivo di sicurezza del percussore, la molla del dispositivo di sicurezza del percussore, e la piastra di copertura del carrello.

144.9 CHF 7 CHF 144.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Glock Cartuccia: 9 mm Luger Modello: 17, 17L, 19, 34, 26

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Kit di completamento per trasformare carrelli nudi di Glock in carrelli completi.
Include componenti come molla percussore, estrattore LCI e sicurezza del percussore.
Compatibile con modelli Glock 17, 17L, 19, 26 e 34 per cartucce 9 mm Luger.

Caratteristiche

Adatto per: Glock Cartuccia: 9 mm Luger Modello: 17,17L,19,26,34 Peso della spedizione: 0.02kg Altezza di spedizione: 191mm Larghezza di spedizione: 6mm Lunghezza di spedizione: 76mm UPC : 639737069082

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

N. prodotto: 100803021
LONE WOLF DIST. M22, M23, M27 M35 & M24 COMPLETION KIT FOR 40 SLIDES
Parti Fabbricante: LWDSLIDEKIT40 639737069075 La maggior parte dei componenti per trasformare un carrello nudo in un carrello completo. (Nessuna molla di rinculo o mirini). Include il rivestimento del canale, il manicotto di spaziatura, le coppe a molla marine, la molla del percussore di peso medio, il percussore, l'estrattore LCI, il cuscinetto a molla, la molla del plunger di depressione, il plunger di depressione, il dispositivo di sicurezza del percussore, la molla del dispositivo di sicurezza del percussore, e la piastra di copertura del carrello.

139.9 CHF 3 CHF 139.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Glock Cartuccia: 40 S&W Modello: 22, 23, 24, 35, 27

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Completa il tuo carrello Glock® con il nostro SLIDE COMPLETION KIT! 🔧 Adatto per modelli 17, 19, 26, 34 e 17L. Facile installazione!

Altro...

Punteggi dei clienti per LONE WOLF DIST. M17, M19, M26, M34 & M17L COMPLETION KIT FOR 9MM SLIDES

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 2.1

Nice to have all parts needed (19.10.2016)

Fragile (25.08.2018)

Liners were junk. (04.10.2018)

some fitting required (18.05.2016)

Most of this kit worked out great, but the rear slide cover wouldnât go on, traced to a plunger that was a hair out of spec. It had to be fitted but went together with some minor sanding and filing.

Missing a part, but Brownells came thru (13.06.2017)