Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

DAYTON TRAISTER
SMALL RING MAUSER COCK-ON-OPEN KIT

240150096

Upgrades Action For Easier Operation

Fits 93-96 Mausers. Redesigned cocking piece and striker spring. Works with Dayton Traister, other commercial triggers or military trigger and safety.

SPECS: Steel, black, matte finish. Requires bolt modification.

Altro...

Aggiorna l'azione per un funzionamento più semplice

Compatibile con i Mauser 93-96. Pezzo di armamento e molla di percussione riprogettati. Funziona con i grilletto Dayton Traister, altri grilletto commerciali o grilletto e sicurezza militari.

SPECS: Acciaio, finitura nera opaca. Richiede modifica del bullone.

Altro...

Punteggi dei clienti per DAYTON TRAISTER 93-96 COCK-ON-OPEN KIT

Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.3

It does work (15.07.2010)

I've converted a number of M94 Swedish and M95 Chilean Mausers with this kit. While it surly is not as easy to install as the kit they make for the M14-M17 Enfield, with a little patience, a Dremel, and some thought, it can go in. Like all gunsmithing, think about how it should work when it goes in. Follow the instructions, but more than that, visulize the operation.

My one hiccup during several times installed (4-5)has been the opening of the bolt the first time it is ready to open on the upstroke of the bolt. The sear seems to gall on the bolt as it exerts unusual pressure to open. Once when converting a M94 I had such a hard time opening the bolt I bent the converted bolt handle with the opening pressure. Thereafter, it functioned smoothly and with little effort. Several other Mausers I converted did not do this. Keep in mind that this series Mauser actions keeps the bolt shroud and cocking piece in place only because the tip of the sear rests in a slight indent you create at the end of the bolt body, where it rests to resist turning accidently, unlike the M98 which has a mechanical interrupt on the bottom of the cocking piece to assure it does not turn on the bolt body until the bolt is going into battery, and a turn of the bolt handle down releases the cocking piece.

The M94-95 are lovely little actions, especially for 6 MM Rem, .257 Rbts, and 7X57 Mauser, all which feed without any conversion. If you read Terry Wieland's attempt to blow up a M94 Mauser, you'll discover these are in fact suitable for most cartridges except those with very high PSI.

Just a hobbyist am I. (02.09.2015)

I agree 100% with the previous review. I only did two of these so far and the first took me an hour to do. The second about 45 minutes. I found that the opening on the back of the bolt had to be cut a bit larger than the instructions recommended. Once I overcame the initial binding and tuff action by making this adjustment, everything became smooth and easy. A little lubricant helps also. At first I was attempting to fit the unit dry and it was a mistake. The largest issue I had was, being my firs attempt to do this, the instructions were not very clear. Once I was able to visualize what the instructions were attempting to convey, I was able to make the apocopate adjustments and everything fell into place, LITELARLY. I did my initial bolt carving on a Bridgeport with a 1/8" carbide cutter and did the final smoothing and fitting with a small air grinder and a cutoff wheel. I combined this unit with a 100-001-866 FN stile shroud and it makes a beautiful combination. I found that it works with any stile trigger. I also found that the spring works the best when the ground portion sits against the shroud and not against the striker. For me, with the spring in the reversed configuration, I found that it had a tendency to bind. I did not allow this experiment to scare me and I had a wonderful result. I am building a few rifles in the obscure 7.62 x 45 Czech cartridge for which the small ring Mauser is a perfect fit and this makes a beautiful rifle out of a military action. With the FN shroud it is a very nice finishing touch. This is a perfect combination for, plinking, hunting deer size game and smaller, target shooting and just all around fun with a rifle that no longer looks like it was a modified military piece.

Just did my second one. (15.01.2016)

The first one I did took me a bit of time to do because I did not know what I was doing. I just did my second one and It was so simple I can't understand what took me so long the first time. The whole job took me about 30 minutes. and it works great. The instructions are not precise and you get to learn the tricks on the first one you do and the second one is than simple. I now won't have enough projects to do for me to be able and do more of these. I now plan on converting EVERY small ring Mauser I have with this kit. I also love the fact that the cocking piece do not stick out so far back. Once again, I am not a gunsmith by any stretch of the imagination but only a hobbyist.

<img width="500" src='/userdocs/reviewimages/44933b93-213a-43a1-9f06-34d8e42a2932.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/e1fbb210-d4b5-4792-b2d6-d0ef05e546a9.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/18d74644-e622-4446-8699-50f8dc409c61.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/e2023704-cc25-4257-b5cb-4dac26e99959.jpg' alt=''>

Leggi più recensioni su brownells.com

104.9 104.9 1 CHF

N. prodotto: 240150096
DAYTON TRAISTER 93-96 COCK-ON-OPEN KIT
Parti Fabbricante: DCPM Compatibile con i Mauser 93-96. Pezzo di armamento e molla di percussione riprogettati. Funziona con i grilletto Dayton Traister, altri grilletto commerciali o grilletto e sicurezza militari.

104.9 CHF 0 CHF 104.90 *

In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Mauser Modello: 93, 96

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: Mauser Modello: 93,96 Peso della spedizione: 0.045kg Altezza di spedizione: 8mm Larghezza di spedizione: 61mm Lunghezza di spedizione: 140mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Scopri il SMALL RING MAUSER COCK-ON-OPEN KIT di Dayton Traister per Mauser 93-96. 🔧 Design migliorato per prestazioni ottimali!

Upgrades Action For Easier Operation

Fits 93-96 Mausers. Redesigned cocking piece and striker spring. Works with Dayton Traister, other commercial triggers or military trigger and safety.

SPECS: Steel, black, matte finish. Requires bolt modification.

Altro...

Aggiorna l'azione per un funzionamento più semplice

Compatibile con i Mauser 93-96. Pezzo di armamento e molla di percussione riprogettati. Funziona con i grilletto Dayton Traister, altri grilletto commerciali o grilletto e sicurezza militari.

SPECS: Acciaio, finitura nera opaca. Richiede modifica del bullone.

Altro...

Punteggi dei clienti per DAYTON TRAISTER 93-96 COCK-ON-OPEN KIT

Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.3

It does work (15.07.2010)

Just a hobbyist am I. (02.09.2015)

Just did my second one. (15.01.2016)

Leggi più recensioni su brownells.com

Scelti da altri clientie

TALLEY

TALLEY BOLT KNOB
BOLT ACTION CLASSIC BOLT KNOB

Manetta di armamento

Riordinato

CHF 21.90

DAYTON TRAISTER
SMALL RING MAUSER COCK-ON-OPEN KIT

Punteggi dei clienti per DAYTON TRAISTER 93-96 COCK-ON-OPEN KIT

Caratteristiche

Dettagli dell'elemento

Punteggi dei clienti per DAYTON TRAISTER 93-96 COCK-ON-OPEN KIT

Collegare

Metodi di pagamento sicuri

Associazioni di categoria

Benvenuti!

DAYTON TRAISTER SMALL RING MAUSER COCK-ON-OPEN KIT

Punteggi dei clienti per DAYTON TRAISTER 93-96 COCK-ON-OPEN KIT

Caratteristiche

Dettagli dell'elemento

Punteggi dei clienti per DAYTON TRAISTER 93-96 COCK-ON-OPEN KIT

Collegare

Metodi di pagamento sicuri

Associazioni di categoria

Benvenuti!

DAYTON TRAISTER
SMALL RING MAUSER COCK-ON-OPEN KIT