Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

SMITH ENTERPRISE
SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER

851100014

Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's

Lets you spend more time practicing with your favorite high-power, match rifle without the recoil. Absolutely no gunsmithing required for amazing muzzle control and greatly reduced felt recoil even on select-fire rifles. Changes the sharp recoil that most shooters experience with the military stock into a soft push. Easily replaces the issue flash hider without alterations and includes the front sight dovetail and castle nut set screw.

Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.

SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.

Altro...

Controllo del Rinculo e della Volata; Si Adatta ai M14/M1A Domestici e Cinesi

Ti consente di trascorrere più tempo a praticare con il tuo fucile di precisione preferito senza il rinculo. Assolutamente nessun lavoro di gunsmithing richiesto per un controllo della volata straordinario e un rinculo percepito notevolmente ridotto anche su fucili a fuoco selettivo. Trasforma il rinculo netto che la maggior parte dei tiratori sperimenta con il calcio militare in una spinta morbida. Sostituisce facilmente il flash hider di serie senza modifiche e include la tacca di mira anteriore e la vite di bloccaggio del dado castello.

Nota: Non si adatta a Norinco/Polytech (M305) con filettatura M15x.75.

SPECIFICHE: Acciaio lavorato, finitura in fosfato di manganese. Lunghezza di 3" (7.6cm), diametro di .862" (21mm), peso di 4.3 oz. (123 g.)

Altro...

Punteggi dei clienti per SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3.9

Great Product (22.12.2010)

Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.

Great Product (08.03.2011)

Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.

Best Brake I've ever seen (19.10.2011)

Reduces muzzle climb to Nil.
A felt reduction in recoil.

I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.

Smooth recoil (11.04.2014)

I originally bought this product to give my M1A a different look. I had it installed at my local gun range by a professional gunsmith, shot a few rounds down range just to try this muzzle break, and I can say that it took away the edge of the recoil and made it smoother.I would highly recommend it for all M1A/M14 owners

Disappointing (08.08.2015)

Unlike the Good Iron Muzzle Break for the M1 Garand this is a two piece unit â¦ that is not clear from the description, or pictures, on the web site.

The unit I received had already begun to rust at the point where the rear mount and the break connect. The finish was scratched, dented, and overall the finish was poor.

Perhaps worse than the rust and the finish was that the rear mount and the break were not properly aligned. I didn't break out the protractor to figure out exactly how far, but looking at it from the rear, the break was rotated clockwise 1 to 2 degrees. The interesting thing is that there are alignment marks on both pieces that were apparently not used during assembly. I may have been able to correct the alignment; but with the rust and the poor finish, including burrs and incomplete machining of several of the ports, I returned it.

VERY DISAPPOINTED (03.11.2016)

Highly disappointed!! The muzzle brake I recieved had large amounts of rust on one side, enough that the bag it came in was stained orange. Also there are some scratches. Much like one of the other reviews on this brake mine is also a 2 piece design, both pieces have alignment marks and they are not properly aligned. My biggest issue is the large amount of rust, like it sat in water. Will exchange this one and see how the second one looks.

<img width="500" src='/userdocs/reviewimages/275fafcf-230a-4720-a9c5-6e5bf85ca88b.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/568e58d2-9d4c-40c6-907a-24590b601435.jpg' alt=''>

Settled down the recoil (17.11.2017)

I've got this on my Springfield standard M1A.

Fits on my rifle just fine, turned that recoil down to 3 from a 7, and it looks good.

The timing with the set screw was off a bit so I can't get it in the recess of the castle nut however the set screw it like extra insurance tighten the castlenut to proper and it'll be fine.

Other reviews stated that it was rusty and rusts quickly, my experience with the piece was it came with one small spot with rust. I cleaned and protected it with CLP end of my rusty woes. That was 8 months ago. Also congrats on owning an M1A. I haven't cleaned mine since I put this on it still runs no problems at all!

Leggi più recensioni su brownells.com

259.9 259.9 1 CHF

N. prodotto: 851100014
SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE
Parti Fabbricante: 2001 Ti consente di trascorrere più tempo a praticare con il tuo fucile di precisione preferito senza il rinculo. Assolutamente nessun lavoro di gunsmithing richiesto per un controllo della volata straordinario e un rinculo percepito notevolmente ridotto anche su fucili a fuoco selettivo. Trasforma il rinculo netto che la maggior parte dei tiratori sperimenta con il calcio militare in una spinta morbida. Sostituisce facilmente il flash hider di serie senza modifiche e include la tacca di mira anteriore e la vite di bloccaggio del dado castello.

259.9 CHF 27 CHF 259.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Springfield Calibro: 30 Calibro (.308) Dimensioni: .862 Filetti: .595-32 Finitura: Manganese Phosphate Materiale: Acciaio inox Modello: M14, M1A

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Riduce significativamente il rinculo, trasformando la spinta acuta in una più morbida.
Facile sostituzione del flash hider originale senza necessità di modifiche.
Realizzato in acciaio inox con finitura fosfato di manganese per una maggiore durabilità.

Caratteristiche

Adatto per: Springfield Calibro: 30 Calibro (.308) Dimensioni: .862 Filetti: .595-32 Finitura: Manganese Phosphate Materiale: Acciaio inox Modello: M14,M1A Peso della spedizione: 0.136kg Altezza di spedizione: 23mm Larghezza di spedizione: 25mm Lunghezza di spedizione: 94mm

Dettagli dell'elemento

Made in Usa

Riduci il rinculo con il M14 Muzzle Brake di Smith Enterprise! 🎯 Facile da installare, migliora il controllo e la precisione del tuo fucile.

Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's

Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.

SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.

Altro...

Controllo del Rinculo e della Volata; Si Adatta ai M14/M1A Domestici e Cinesi

Nota: Non si adatta a Norinco/Polytech (M305) con filettatura M15x.75.

SPECIFICHE: Acciaio lavorato, finitura in fosfato di manganese. Lunghezza di 3" (7.6cm), diametro di .862" (21mm), peso di 4.3 oz. (123 g.)

Altro...

Punteggi dei clienti per SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3.9

Great Product (22.12.2010)

Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.

Great Product (08.03.2011)

Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.

Best Brake I've ever seen (19.10.2011)

Reduces muzzle climb to Nil.
A felt reduction in recoil.

I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.

Smooth recoil (11.04.2014)