Le magwell permet des recharges rapides et sans distraction en dirigeant le chargeur dans le pistolet.
Fabriqué en nylon polymère, il est léger et protège l'ouverture du magwell des dommages.
Compatible avec les modèles 9mm/.40 S&W, mais peut nécessiter une légère coupe pour certains modèles récents.
Caractéristiques
Finition:Noir
Modèle:XD
Type d'arme:Springfield
Poids du colis:0.014kg
Hauteur d'expédition:10mm
Largeur d'expédition:102mm
Longueur d'expédition:163mm
UPC:625214016205
Détails de l'article
US export classification: 0A501.y.1
Spécifications:
Finition: Noir
Manufacture: Springfield
Modèle: XD
35.935.91CHF
Sale
32.3CHFCHF 32.30
CHF 35.90
Le prix inclut la TVA mais pas la livraison .
Référence: 100006212
N° fabr.: NONE
625214016205 Le magwell à fixer dirige le chargeur directement dans le pistolet pour des recharges rapides sans hésitation ni distraction. Le polymère moulé léger ne raye pas, ne marque pas et ne déforme pas, et il protège également l'ouverture du magwell des dommages. Il suffit de l'insérer dans le bas de la poignée et de serrer la vis de retenue en acier incluse pour un maintien ajusté et parfaitement adapté. Des modèles séparés sont disponibles pour 9mm/.40 S&W.
En stock
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Bolt-on magwell funnels magazine directly into the pistol for quick reloads without fumbling or distraction. Lightweight molded polymer won’t mar, scrape, or dent, plus it protects the magwell opening from damage. Just insert into the bottom of the grip and tighten the included steel retention screw for a snug, form-fitting, grip. Separate models available for 9mm/.40 S&W.
Pour des recharges rapides et sans erreur sous pression
Le magwell à fixer dirige le chargeur directement dans le pistolet pour des recharges rapides sans hésitation ni distraction. Le polymère moulé léger ne raye pas, ne marque pas et ne déforme pas, et il protège également l'ouverture du magwell des dommages. Il suffit de l'insérer dans le bas de la poignée et de serrer la vis de retenue en acier incluse pour un maintien ajusté et parfaitement adapté. Des modèles séparés sont disponibles pour 9mm/.40 S&W.
Points forts
Le magwell permet des recharges rapides et sans distraction en dirigeant le chargeur dans le pistolet.
Fabriqué en nylon polymère, il est léger et protège l'ouverture du magwell des dommages.
Compatible avec les modèles 9mm/.40 S&W, mais peut nécessiter une légère coupe pour certains modèles récents.
Caractéristiques
Finition:Noir
Modèle:XD
Type d'arme:Springfield
Poids du colis:0.014kg
Hauteur d'expédition:10mm
Largeur d'expédition:102mm
Longueur d'expédition:163mm
UPC:625214016205
Détails de l'article
US export classification: 0A501.y.1
Avis des clients
Notes des clients (7)
2.9 / 5
Recommandé, avec réserves
Not what expected about installation 20.02.2018
Does not fit as expected. Had to trim a lot and still does not fit well. There is a gap at the bottom. The holding screw only makes a hole on the frame. Bit disappointed indeed.
Recommandé, avec réserves
serves its purpose, hole in grip 14.07.2017
I bought this for my XD 40. It fits the hole at the bottom of the grip but does not take in the whole insert and it creates a gap I have to use a small mallet to push it. The stopper screw at the back of the magwell makes a hole in my grip. I have to put glue to hold the sides of the magwell because it creates a gap on the side. I have to put glue to in between the bottom part of the grip and the magwell to hold it in place because the screw was not able to hold the grip in place it slowly slips. I have to make some resizing of the insert of the magwell so that it will fit the bottom of the grip but despite all these it serves it purpose.
Recommandé, avec réserves
EASY FIT MAG WELL FOR XD 28.04.2014
I use this on my xd service 45acp works great fits great with no modifcation drop in two screws and your done.
Recommandé, avec réserves
poor fit 09.10.2012
installed on my xd tac 9mm the tab on it didnt fit at all ended up removing it and using the screw drectly into my grip very flexable and thin felling. way better off getting a metal mag well.
Non recommandé
Not so sure about this product 19.03.2012
I installed one of these on a duty weapon for a friend of mine. It felt flimsy and shortly broke. I can't recommend this product.
Fortement recommandé
Easy install and good value. 10.11.2011
I bought this from the maker in CA before I saw it at Brownells and installed this on my XD Tactical 5" 45 ACP Pistol in less than 5 minutes. It really helps guide fresh mags into the gun and fits the gun and mags well. I am not into Race Gun shooting but I believe this will continue to work well on my primary carry/duty gun.
Moyennement recommandé
Too bad it's made out of Nylon 20.04.2011
Mine broke after 2 or 3 matches because of a bobbled magazine change. Make no mistake, this is made of hard nylon/plastic/polymer/whatever and it can break as mine did. No warranty is mentioned at all...so buyer beware.
It was very easy to install and it did work well with the factory magazines (including the opening at the front for easy mag removal). Just a shame that it is not made of something metal-based. I only bought it because it was the only thing available in Canada.
Derniers visualisés
Oups ! Quelque chose s’est mal passé.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.
Améliorez vos recharges avec le magwell Springfield XD EasyFit! ✨ Conçu pour 9mm/.40 S&W, il offre rapidité et protection.
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.