Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

EGW
S&W 52 VORTEX VIPER/VENOM SIGHT MOUNT

841370113637 296000799
EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Smith & Wesson Model 52 This mount does not fit: Smith & Wesson Model 41
79.9 79.9 1 CHF
N. prodotto: 296000799
EGW S&W 52 VORTEX VIPER/VENOM SIGHT MOUNT
Parti Fabbricante: 49309 841370113637
79.9 CHF 2 CHF 79.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Smith & Wesson Colore: Black Materiale: Alluminio Modello: 52 Numero di basi: 1 pezzo Tipo: Tattico

Caratteristiche

Adatto per: Smith & Wesson Colore: Black Materiale: Alluminio Modello: 52 Numero di basi: 1 pezzo Tipo: Tattico Peso della spedizione: 0.045kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 140mm UPC : 841370113637

Dettagli dell'elemento

Made in Usa




EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Smith & Wesson Model 52 This mount does not fit: Smith & Wesson Model 41