Applies More Pressure To Follower For Smooth Feeding From Extended Magazines
Extra-length magazine spring replaces factory-supplied spring for use with aftermarket magazine extenders and extended base pads that increase round capacity. Gives follower up to 10% more power for smooth, reliable feeding of rounds. Made of certified aerospace-spec chrome silicon wire, then heat-treated and stress-relieved to ISO 9000 standards.
SPECS: Chrome silicon steel wire. Fits S&W M&P pistols chambered in 9mm, .40 S&W, and .357 SIG.
Altro...
Applica Maggiore Pressione Al Carrello Per Un'Alimentazione Fluida Da Caricatori Estesi
Molla del caricatore extra-lunga che sostituisce la molla fornita di fabbrica per l'uso con estensori di caricatore aftermarket e basi estese che aumentano la capacità di colpi. Fornisce al carrello fino al 10% di potenza in più per un'alimentazione fluida e affidabile dei colpi. Realizzata in filo di silicio cromato certificato secondo le specifiche aerospaziali, quindi trattata termicamente e alleviata dallo stress secondo gli standard ISO 9000.
SPECS: Filo in acciaio al silicio cromato. Si adatta alle pistole S&W M&P camerate in 9mm, .40 S&W e .357 SIG.
Altro...
Punteggi dei clienti per BROWNELLS S&W M&P EXTRA POWER MAG SPRING
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
Fits my M&P 9 10 round magazine(08.05.2011)
These are great springs. I could not find any springs specifically for the 10-round magazine for my M&P 9 so I bought these, hoping I could make them fit. They fit perfectly and they work even better then the stock springs. These springs do not hook into the hole on the magazine follower, but I do not see this as a problem.[...]
Thank goodness(14.09.2013)
Since S&W has, for whatever reason, chosen to leave us M&P users high and dry I had to find used mags that needed spring replacement. Thanks Brownells for this quality product. The used mags now function like the factory new mags.
better than the factory!(20.09.2014)
I have been using these for the extended 45mags for a few months now and have had good results. The factory springs were designed poorly and with the taper would it would impinge on itself then bind up and become useless and it was almost impossible to get the 14th rnd in. These are more of a solid design and won't bind on themselves. I have had issue with the mags not actuating the slide catch on the last round and failing to lock back but it is still better than the factory ones binding half way through a mag. (Note: The description can be deceiving when it says high capacity. I don't think they were intended for the 14rnd 45 mags but they do work better than the factory)
N. prodotto: 078000168 BROWNELLS S&W M&P EXTRA POWER MAG SPRING050806003569 Molla del caricatore extra-lunga che sostituisce la molla fornita di fabbrica per l'uso con estensori di caricatore aftermarket e basi estese che aumentano la capacità di colpi. Fornisce al carrello fino al 10% di potenza in più per un'alimentazione fluida e affidabile dei colpi. Realizzata in filo di silicio cromato certificato secondo le specifiche aerospaziali, quindi trattata termicamente e alleviata dallo stress secondo gli standard ISO 9000.
9.9CHF16CHF 9.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonModello: M&PQuantità: 1
La molla del caricatore extra-lunga aumenta la capacità di colpi e fornisce fino al 10% di potenza in più.
Realizzata in filo al cromo silicio certificato per specifiche aerospaziali e trattata termicamente.
Compatibile con le pistole S&W M&P camerate in 9mm, .40 S&W e .357 SIG.
Caratteristiche
Adatto per:
Smith & Wesson
Modello:
M&P
Peso della spedizione: 0.009kgAltezza di spedizione: 13mmLarghezza di spedizione: 71mmLunghezza di spedizione: 231mm
UPC
: 050806003569
Dettagli dell'elemento
Made in Usa
Scopri la molla extra-power per S&W M&P 🔧, ideale per estensori e garantisce un'alimentazione fluida e affidabile.
Applies More Pressure To Follower For Smooth Feeding From Extended Magazines
Extra-length magazine spring replaces factory-supplied spring for use with aftermarket magazine extenders and extended base pads that increase round capacity. Gives follower up to 10% more power for smooth, reliable feeding of rounds. Made of certified aerospace-spec chrome silicon wire, then heat-treated and stress-relieved to ISO 9000 standards.
SPECS: Chrome silicon steel wire. Fits S&W M&P pistols chambered in 9mm, .40 S&W, and .357 SIG.
Altro...
Applica Maggiore Pressione Al Carrello Per Un'Alimentazione Fluida Da Caricatori Estesi
Molla del caricatore extra-lunga che sostituisce la molla fornita di fabbrica per l'uso con estensori di caricatore aftermarket e basi estese che aumentano la capacità di colpi. Fornisce al carrello fino al 10% di potenza in più per un'alimentazione fluida e affidabile dei colpi. Realizzata in filo di silicio cromato certificato secondo le specifiche aerospaziali, quindi trattata termicamente e alleviata dallo stress secondo gli standard ISO 9000.
SPECS: Filo in acciaio al silicio cromato. Si adatta alle pistole S&W M&P camerate in 9mm, .40 S&W e .357 SIG.
Altro...
Punteggi dei clienti per BROWNELLS S&W M&P EXTRA POWER MAG SPRING
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
Fits my M&P 9 10 round magazine(08.05.2011)
These are great springs. I could not find any springs specifically for the 10-round magazine for my M&P 9 so I bought these, hoping I could make them fit. They fit perfectly and they work even better then the stock springs. These springs do not hook into the hole on the magazine follower, but I do not see this as a problem.[...]
Thank goodness(14.09.2013)
Since S&W has, for whatever reason, chosen to leave us M&P users high and dry I had to find used mags that needed spring replacement. Thanks Brownells for this quality product. The used mags now function like the factory new mags.
better than the factory!(20.09.2014)
I have been using these for the extended 45mags for a few months now and have had good results. The factory springs were designed poorly and with the taper would it would impinge on itself then bind up and become useless and it was almost impossible to get the 14th rnd in. These are more of a solid design and won't bind on themselves. I have had issue with the mags not actuating the slide catch on the last round and failing to lock back but it is still better than the factory ones binding half way through a mag. (Note: The description can be deceiving when it says high capacity. I don't think they were intended for the 14rnd 45 mags but they do work better than the factory)