Plus de 300 000 clients - nous vous disons merci !

40 000+ produits pour la chasse et le tir sportif

EGW
S&W M&P SHIELD EZ VORTEX VIPER/VENOM SIGHT MOUNT

841370117567 296000652
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Does not work with M&P, M&P 2.0 or M&P 22.
79.9 79.9 1 CHF
Référence: 296000652
EGW S&W M&P SHIELD EZ VORTEX VIPER/VENOM SIGHT MOUNT
Ref Fabricant: 49292 841370117567
79.9 CHF 2 CHF 79.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Couleur: Noir Manufacture: Smith & Wesson Matériaux: Aluminum Modèle: M&P380 Shield EZ 2.0, M&P9 Shield EZ Nombre d'Embases: 1-Pièce Style: Tactique

Caractéristiques

Couleur: Noir Manufacture: Smith & Wesson Matériaux: Aluminum Modèle: M&P380 Shield EZ 2.0,M&P9 Shield EZ Nombre d'Embases: 1-Pièce Style: Tactique Poids du colis: 0.029kg Hauteur d'expédition: 25mm Largeur d'expédition: 79mm Longueur d'expédition: 133mm UPC : 841370117567

Détails de l'article

Fabriqué au USA




EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Does not work with M&P, M&P 2.0 or M&P 22.
Retour en haut de page