On the bench or in the field, you ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Four bits to fit side plate, grip, thumb latch, and rear sight elevation and tang screws.
SPECS: 8" (20.3cm) long overall. 1¼" (3.2cm) diameter grip.
Altro...
Auto-conservazione, da portare per 'Smiths & Shooters
Sul banco o sul campo, avrai i cacciaviti giusti per la tua arma in un pacchetto compatto e portatile. Abbiamo abbinato con precisione le viti di ciascuna arma ai corretti bit Magna-Tip® per offrirti la migliore aderenza possibile tra lama e fessura. Salvo diversa indicazione, ogni set viene fornito con un attacco magnetico, manico cavo per una facile conservazione dei bit a bordo. Quattro bit per adattarsi alla piastra laterale, alla maniglia, al gancio del pollice e alle viti di elevazione e tang del mirino posteriore.
SPECS: 8" (20.3cm) lunghezza totale. 1¼" (3.2cm) diametro della maniglia.
Altro...
Punteggi dei clienti per BROWNELLS S&W COMBO BITS ONLY
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3.6
Tips are too thin for my J frame.(19.02.2017)
This set of bits are good quality, but were useless for the side plate and crane screws on a 1999 640-1and a 2016 340 M&P. The tip thickness of the 150-3 included in the set is too thin to properly fit the screw notches.
The Best(04.09.2009)
The only Screwdrivers and bits I use to work on Guns.
VERY NICE!(18.08.2010)
These Brownell bits are superbly crafted and fit all my S&W revolvers, from J-Frames to N-Frames. Plus, they fit many slotted fasteners on my rifles too. I'm so impressed, I'm going to order a complete Brownell's bit set.
Not up to Brownells usual quality(27.10.2011)
On the very first screw, a side plate screw, the screwdriver tip bent and buggered up the screw head. Very dissappointed!
Excellent Bits(06.04.2012)
My armored courier company very recently began issuing semi-automatics. But before that, everyone brought me their guns to clean. This 4-in-1 screwdriver let me clean and lubricate everything on our model 64's easily and without damage to the weapons. If you're doing anything with a S&W revolver, you need this.
Nice set, but missing an important bit.(08.08.2014)
I like the bits and the handle and the idea of including a set up the most used bits for a S&W revolver. The problem is, the MOST used bit for my N framed 625 isn't included. None of the included bits properly fit the yoke screw (which appears to need a 180-4 bit. Some of the bits that are included don't seem to fit anything on my revolver. They may be for a different frame size. But, the kit should have the proper yoke screw bit for each frame size.
Excellent Product(08.02.2017)
Purchased this set for my S&W 460 and 500. The smallest bit seems to have no real use for my S&W X-frames, the other bits are excellent for the side plate and cylinder release screws.
The larger bit is good for the grip screw but somewhat undersized. Overall an excellent product!
N. prodotto: 080087002 BROWNELLS S&W COMBO BITS ONLY050806007963 Sul banco o sul campo, avrai i cacciaviti giusti per la tua arma in un pacchetto compatto e portatile. Abbiamo abbinato con precisione le viti di ciascuna arma ai corretti bit Magna-Tip® per offrirti la migliore aderenza possibile tra lama e fessura. Salvo diversa indicazione, ogni set viene fornito con un attacco magnetico, manico cavo per una facile conservazione dei bit a bordo. Quattro bit per adattarsi alla piastra laterale, alla maniglia, al gancio del pollice e alle viti di elevazione e tang del mirino posteriore.
24.9CHF0CHF 24.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonModello: Universal Handguns
Set compatto e portatile di cacciaviti specifici per armi Smith & Wesson.
Include quattro bit per viti di copertura laterale, impugnatura, gancio del pollice e viti di elevazione.
Ogni set è fornito con un attacco magnetico e manico cavo per una facile conservazione.
Caratteristiche
Adatto per:
Smith & Wesson
Modello:
Universal Handguns
Peso della spedizione: 0.027kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
UPC
: 050806007963
Dettagli dell'elemento
Made in Usa
N. prodotto: 080087004 BROWNELLS S&W 4-IN-1 COMBO SCREWDRIVER050806007970 Sul banco o sul campo, avrai i cacciaviti giusti per la tua arma in un pacchetto compatto e portatile. Abbiamo abbinato con precisione le viti di ciascuna arma ai corretti bit Magna-Tip® per offrirti la migliore aderenza possibile tra lama e fessura. Salvo diversa indicazione, ogni set viene fornito con un attacco magnetico, manico cavo per una facile conservazione dei bit a bordo. Quattro bit per adattarsi alla piastra laterale, alla maniglia, al gancio del pollice e alle viti di elevazione e tang del mirino posteriore.
44.9CHF87CHF 44.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonManiglia: 84 HollowModello: Universal HandgunsTipo: 4-Bits
On the bench or in the field, you ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Four bits to fit side plate, grip, thumb latch, and rear sight elevation and tang screws.
SPECS: 8" (20.3cm) long overall. 1¼" (3.2cm) diameter grip.
Altro...
Auto-conservazione, da portare per 'Smiths & Shooters
Sul banco o sul campo, avrai i cacciaviti giusti per la tua arma in un pacchetto compatto e portatile. Abbiamo abbinato con precisione le viti di ciascuna arma ai corretti bit Magna-Tip® per offrirti la migliore aderenza possibile tra lama e fessura. Salvo diversa indicazione, ogni set viene fornito con un attacco magnetico, manico cavo per una facile conservazione dei bit a bordo. Quattro bit per adattarsi alla piastra laterale, alla maniglia, al gancio del pollice e alle viti di elevazione e tang del mirino posteriore.
SPECS: 8" (20.3cm) lunghezza totale. 1¼" (3.2cm) diametro della maniglia.
Altro...
Punteggi dei clienti per BROWNELLS S&W COMBO BITS ONLY
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3.6
Tips are too thin for my J frame.(19.02.2017)
This set of bits are good quality, but were useless for the side plate and crane screws on a 1999 640-1and a 2016 340 M&P. The tip thickness of the 150-3 included in the set is too thin to properly fit the screw notches.
The Best(04.09.2009)
The only Screwdrivers and bits I use to work on Guns.
VERY NICE!(18.08.2010)
These Brownell bits are superbly crafted and fit all my S&W revolvers, from J-Frames to N-Frames. Plus, they fit many slotted fasteners on my rifles too. I'm so impressed, I'm going to order a complete Brownell's bit set.
Not up to Brownells usual quality(27.10.2011)
On the very first screw, a side plate screw, the screwdriver tip bent and buggered up the screw head. Very dissappointed!
Excellent Bits(06.04.2012)
My armored courier company very recently began issuing semi-automatics. But before that, everyone brought me their guns to clean. This 4-in-1 screwdriver let me clean and lubricate everything on our model 64's easily and without damage to the weapons. If you're doing anything with a S&W revolver, you need this.
Nice set, but missing an important bit.(08.08.2014)
I like the bits and the handle and the idea of including a set up the most used bits for a S&W revolver. The problem is, the MOST used bit for my N framed 625 isn't included. None of the included bits properly fit the yoke screw (which appears to need a 180-4 bit. Some of the bits that are included don't seem to fit anything on my revolver. They may be for a different frame size. But, the kit should have the proper yoke screw bit for each frame size.
Excellent Product(08.02.2017)
Purchased this set for my S&W 460 and 500. The smallest bit seems to have no real use for my S&W X-frames, the other bits are excellent for the side plate and cylinder release screws.
The larger bit is good for the grip screw but somewhat undersized. Overall an excellent product!