Stop guessing about your primer pockets. Know for sure with the Swage Gage Primer Pocket Gauge. Available for Small or Large primers. Check primer pocket depth and diameter. Use the "Go" end of the gauge to check primer pocket depth, if any crimp is properly removed, and if the primer pocket is loose. If it feels loose on the "Go" end of the gauge, use the other end of the tool, the "No Go" end, to test if the primer pocket is too loose to hold a primer. If the No-Go gauge slides into the pocket, then you know to junk that brass.
Plus...
Ne devine plus à propos de tes poches de amorces. Sache avec certitude grâce au Swage Gage Primer Pocket Gauge. Disponible pour les amorces petites ou grandes. Vérifie la profondeur et le diamètre de la poche d'amorce. Utilise l'extrémité "Go" du gabarit pour vérifier la profondeur de la poche d'amorce, si le sertissage a été correctement retiré, et si la poche d'amorce est lâche. Si cela semble lâche à l'extrémité "Go" du gabarit, utilise l'autre extrémité de l'outil, l'extrémité "No Go", pour tester si la poche d'amorce est trop lâche pour maintenir une amorce. Si le gabarit No-Go glisse dans la poche, alors tu sais qu'il faut jeter ce laiton.
Plus...
Évaluations client de BROWNELLS LARGE PRIMER POCKET SWAGE GAUGE
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 4.2
Priver Pocket "Go No-Go" Gauge(21.10.2014)
This "Go No-Go" gauge is a handy and accurate tool to check primer pocket diameters. Cannot get any easier.
Not a Tool - A Miniture Gadget(04.11.2016)
This gauge must have been designed and made for a hand of a 10-year old.
The body is 0.48 inch in diameter and only 0.75 inch long. It disappears in my hand. This tool must have been designed by someone who is not a person who reloads ammunition. An acceptable size would be a body at least â inch in diameter and a lengths of approximately 1-¼ inch. A tool in this size I would love and would be able to use.
Reloading equipment is mainly used by the men population and not by a small child. I had it tested by my wife since her hands are smaller than my, ans she also had difficulties using this tool because of its size. If you redesign this tool to the recommended measurements it would be a wonderful tool, The size it is now, I consider it totally useless. Definitely NOT to be recommended.
Checks for large and too small pockets(05.09.2017)
Easy to use inexpensive must have tool. It's not as small as the other reviewer started
Handy Tool(06.03.2018)
I have no idea what the last persons review could possibly be based on. This is a well built handy little tool that works perfectly for its intended use. I can sort crimped or oversized primer pockets as fast as one physically can. No problem fitting in my large hands, maybe the last person was all thumbs! Lol
Great tool(05.10.2018)
Great tool, got one for large and small primer pockets. Quick to check Which cases need to be swaged and any worn primer pockets. I thought it was small when I first saw it , but after using it....no problems....would recommend.
Référence: 100015614 BROWNELLS LARGE PRIMER POCKET SWAGE GAUGE Ref Fabricant: SG-LP-002857042005018 Ne devine plus à propos de tes poches de amorces. Sache avec certitude grâce au Swage Gage Primer Pocket Gauge. Disponible pour les amorces petites ou grandes. Vérifie la profondeur et le diamètre de la poche d'amorce. Utilise l'extrémité "Go" du gabarit pour vérifier la profondeur de la poche d'amorce, si le sertissage a été correctement retiré, et si la poche d'amorce est lâche. Si cela semble lâche à l'extrémité "Go" du gabarit, utilise l'autre extrémité de l'outil, l'extrémité "No Go", pour tester si la poche d'amorce est trop lâche pour maintenir une amorce. Si le gabarit No-Go glisse dans la poche, alors tu sais qu'il faut jeter ce laiton.
21.9CHF17CHF 21.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100015613 BROWNELLS SMALL PRIMER POCKET SWAGE GAUGE Ref Fabricant: SG-SP-001857042005032 Ne devine plus à propos de tes poches de amorces. Sache avec certitude grâce au Swage Gage Primer Pocket Gauge. Disponible pour les amorces petites ou grandes. Vérifie la profondeur et le diamètre de la poche d'amorce. Utilise l'extrémité "Go" du gabarit pour vérifier la profondeur de la poche d'amorce, si le sertissage a été correctement retiré, et si la poche d'amorce est lâche. Si cela semble lâche à l'extrémité "Go" du gabarit, utilise l'autre extrémité de l'outil, l'extrémité "No Go", pour tester si la poche d'amorce est trop lâche pour maintenir une amorce. Si le gabarit No-Go glisse dans la poche, alors tu sais qu'il faut jeter ce laiton.
21.9CHF15CHF 21.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Stop guessing about your primer pockets. Know for sure with the Swage Gage Primer Pocket Gauge. Available for Small or Large primers. Check primer pocket depth and diameter. Use the "Go" end of the gauge to check primer pocket depth, if any crimp is properly removed, and if the primer pocket is loose. If it feels loose on the "Go" end of the gauge, use the other end of the tool, the "No Go" end, to test if the primer pocket is too loose to hold a primer. If the No-Go gauge slides into the pocket, then you know to junk that brass.
Plus...
Ne devine plus à propos de tes poches de amorces. Sache avec certitude grâce au Swage Gage Primer Pocket Gauge. Disponible pour les amorces petites ou grandes. Vérifie la profondeur et le diamètre de la poche d'amorce. Utilise l'extrémité "Go" du gabarit pour vérifier la profondeur de la poche d'amorce, si le sertissage a été correctement retiré, et si la poche d'amorce est lâche. Si cela semble lâche à l'extrémité "Go" du gabarit, utilise l'autre extrémité de l'outil, l'extrémité "No Go", pour tester si la poche d'amorce est trop lâche pour maintenir une amorce. Si le gabarit No-Go glisse dans la poche, alors tu sais qu'il faut jeter ce laiton.
Plus...
Évaluations client de BROWNELLS LARGE PRIMER POCKET SWAGE GAUGE
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 4.2
Priver Pocket "Go No-Go" Gauge(21.10.2014)
This "Go No-Go" gauge is a handy and accurate tool to check primer pocket diameters. Cannot get any easier.
Not a Tool - A Miniture Gadget(04.11.2016)
This gauge must have been designed and made for a hand of a 10-year old.
The body is 0.48 inch in diameter and only 0.75 inch long. It disappears in my hand. This tool must have been designed by someone who is not a person who reloads ammunition. An acceptable size would be a body at least â inch in diameter and a lengths of approximately 1-¼ inch. A tool in this size I would love and would be able to use.
Reloading equipment is mainly used by the men population and not by a small child. I had it tested by my wife since her hands are smaller than my, ans she also had difficulties using this tool because of its size. If you redesign this tool to the recommended measurements it would be a wonderful tool, The size it is now, I consider it totally useless. Definitely NOT to be recommended.
Checks for large and too small pockets(05.09.2017)
Easy to use inexpensive must have tool. It's not as small as the other reviewer started
Handy Tool(06.03.2018)
I have no idea what the last persons review could possibly be based on. This is a well built handy little tool that works perfectly for its intended use. I can sort crimped or oversized primer pockets as fast as one physically can. No problem fitting in my large hands, maybe the last person was all thumbs! Lol
Great tool(05.10.2018)
Great tool, got one for large and small primer pockets. Quick to check Which cases need to be swaged and any worn primer pockets. I thought it was small when I first saw it , but after using it....no problems....would recommend.