Oversize diameter and extended length and give positive bolt control for fumble-free cycling of tactical and benchrest rifles. No more holding the bolt handle with two fingers to clear the scope bell. Provides additional leverage needed to clear stuck rounds. Lightweight aluminum keeps weight down. Installation requires machining and threading of original bolt handle. Mini bolt knob includes ½” wrench for scope removal.
SPECS: 7075 T6 aluminum alloy, hardcoat anodized, matte black or gloss red finish. 1½" (4cm) long, .975" (24.7mm) diameter. 1.3 oz. (35 g) weight. Mini - Length – 1.21” Diameter – 0.90” Weight – 0.5 oz Gunsmith installation recommended. 5/16-24 TPI.
Altro...
Pomello Esteso Facile da Afferrare per un Ciclo Positivo del Bullone
Il diametro oversize e la lunghezza estesa offrono un controllo positivo del bullone per un ciclo senza problemi delle carabine tattiche e da benchrest. Non è più necessario tenere la maniglia del bullone con due dita per liberare il campanotto della mira. Fornisce la leva aggiuntiva necessaria per liberare le cartucce bloccate. L'alluminio leggero mantiene il peso ridotto. L'installazione richiede la lavorazione e la filettatura della maniglia del bullone originale. Il pomello del bullone mini include una chiave da ½” per la rimozione della mira.
SPECIFICHE: lega di alluminio 7075 T6, anodizzato a finitura dura, finitura nera opaca o rossa lucida. Lunghezza 1½" (4cm), diametro .975" (24.7mm). Peso 1.3 oz. (35 g). Mini - Lunghezza – 1.21” Diametro – 0.90” Peso – 0.5 oz. Si consiglia l'installazione da parte di un armaiolo. 5/16-24 TPI.
Altro...
Punteggi dei clienti per BADGER ORDNANCE BLACK BOLT KNOB
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4.9
Mini Tactical Bolt handle(17.06.2013)
Great product, fitted onto my Rem 700 in .204 to help with clearance from scope when cycling action. Had previously had a look at full sized knobs but they didn't fit with the look and function I was chasing. If you are half capable, the job can be done at home with a hacksaw, file and die of the correct thread size. I will be purchasing a couple more for both my long range rig and target rifle, which has a particularly stiff bolt after firing.
More leverage than ever.(15.09.2009)
This is a must for anyone. Not only tactical shooters. This knob allows you to remove stuck cases better, faster cycling on the bolt and an overall easier grip.
i was looking for something to replace the standard bolt knob on my remington 700P and had seen several rifles with this knob on them, and decided i wanted something similar. after looking at what all was available i decided on this one because of the size dimensions and shape.
i ordered through brownells and got a fantastic price and they were the only place that had them in stock. kudos to brownells on that.
after getting my bolt back from AZ Precision, and taking it to the range, i have to say this bolt makes a HUGE difference. working the bolt is easier as the knob is far easier to get a hold of and fits my hand a lot better, the length of the bolt handle is extended by over an inch giving you better leverage, and since the knob is aluminum it doesnt at any weight! it is PERFECT for the serious shooter looking for a way to improve the function of their rifle. it makes rapid bolt manipulation so much easier you wont beleive it until you feel it for yourself.
This is a very affordable and very great upgrade, and this particular part, from this seller at this price is just fantastic. cannot be beat!
I have recommended this to three other friends who have long rifles and all will be purchasing and having this installed based on how well it works on mine.
Great Product(07.12.2009)
Put it on 2 of my rifles exellent quality and also very good looking but the most important thing is it holds very well against the elements.
A HELP IN TACTICAL AND HUNTING(24.01.2010)
This knob is the defacto standard when going with an over sized bolt knob. Better leverage for opening the bolt in any situation. I installed the knob myself but this should really be installed by someone what has a mil and knows what he is doing. A lot of material has to be removed and a mil works so much better than the belt sander I used. It took about 2+ hours and is not for the inexperienced or faint of heart. The original bolt must be "made round" (.313) then threaded with approx. 1/2 inch removed from the end of the bolt handle so the new knob can be screwed and glued on all the way. When finished you will be pleased with the looks,feel and ease of use.
Excellent addition to a bolt gun(27.02.2010)
I recently installed this product on my sniper rifle and could not be happier with the outcome. I installed the knob myself using a combination of a dremel tool with a reinforced cutting wheel, bench grinder and hand files. It took me slightly less than an hour and a half to complete the alteration to the bolt handle. Definitely not for the inexperienced to install. This is a great addition to the Remington weapon system.
A well designed, quality product....!(18.12.2010)
I installed this bolt knob on a customer's M77 SS bolt handle. The cast SS Ruger bolt handle was tough to machine and thread but the final result was spectacular. These knobs were designed for the Remington 700 but I have used them successfully on many different makes of rifle bolts. I would recommend this product be installed by a qualified machinist or gunsmith to achieve the best results.
N. prodotto: 093000007 BADGER ORDNANCE BLACK BOLT KNOB Parti Fabbricante: 30631 Il diametro oversize e la lunghezza estesa offrono un controllo positivo del bullone per un ciclo senza problemi delle carabine tattiche e da benchrest. Non è più necessario tenere la maniglia del bullone con due dita per liberare il campanotto della mira. Fornisce la leva aggiuntiva necessaria per liberare le cartucce bloccate. L'alluminio leggero mantiene il peso ridotto. L'installazione richiede la lavorazione e la filettatura della maniglia del bullone originale. Il pomello del bullone mini include una chiave da ½” per la rimozione della mira.
64.9CHF40CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Il design sovradimensionato e la lunghezza estesa migliorano il controllo del bullone, facilitando il ciclo su fucili tattici e da benchrest.
Realizzato in lega di alluminio 7075 T6, disponibile in finitura opaco nero o rosso lucido, per un peso ridotto.
Installazione consigliata da un armaiolo, richiede lavorazione e filettatura della maniglia del bullone originale.
Caratteristiche
Adatto per:
Remington
Finitura:
Opaco Black
Mano:
Ambidestro
Modello:
Universal Rifles
Peso della spedizione: 0.05kgAltezza di spedizione: 38mmLarghezza di spedizione: 41mmLunghezza di spedizione: 79mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 093000045 BADGER ORDNANCE MINI TACTICAL BOLT KNOB Parti Fabbricante: 306-74 Il diametro oversize e la lunghezza estesa offrono un controllo positivo del bullone per un ciclo senza problemi delle carabine tattiche e da benchrest. Non è più necessario tenere la maniglia del bullone con due dita per liberare il campanotto della mira. Fornisce la leva aggiuntiva necessaria per liberare le cartucce bloccate. L'alluminio leggero mantiene il peso ridotto. L'installazione richiede la lavorazione e la filettatura della maniglia del bullone originale. Il pomello del bullone mini include una chiave da ½” per la rimozione della mira.
74.9CHF10CHF 74.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Il design sovradimensionato e la lunghezza estesa migliorano il controllo del bullone per un ciclo fluido.
Realizzato in lega di alluminio 7075 T6, disponibile in nero opaco o rosso lucido.
Installazione consigliata da un armaiolo; richiede lavorazione e filettatura della maniglia originale.
Caratteristiche
Adatto per:
Remington
Finitura:
Nero
Mano:
Ambidestro
Peso della spedizione: 0.023kgAltezza di spedizione: 38mmLarghezza di spedizione: 40mmLunghezza di spedizione: 80mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Scopri il pomello del bullone oversize di Badger Ordnance 🔧 per un controllo ottimale delle carabine. Leggero e facile da installare!
Oversize diameter and extended length and give positive bolt control for fumble-free cycling of tactical and benchrest rifles. No more holding the bolt handle with two fingers to clear the scope bell. Provides additional leverage needed to clear stuck rounds. Lightweight aluminum keeps weight down. Installation requires machining and threading of original bolt handle. Mini bolt knob includes ½” wrench for scope removal.
SPECS: 7075 T6 aluminum alloy, hardcoat anodized, matte black or gloss red finish. 1½" (4cm) long, .975" (24.7mm) diameter. 1.3 oz. (35 g) weight. Mini - Length – 1.21” Diameter – 0.90” Weight – 0.5 oz Gunsmith installation recommended. 5/16-24 TPI.
Altro...
Pomello Esteso Facile da Afferrare per un Ciclo Positivo del Bullone
Il diametro oversize e la lunghezza estesa offrono un controllo positivo del bullone per un ciclo senza problemi delle carabine tattiche e da benchrest. Non è più necessario tenere la maniglia del bullone con due dita per liberare il campanotto della mira. Fornisce la leva aggiuntiva necessaria per liberare le cartucce bloccate. L'alluminio leggero mantiene il peso ridotto. L'installazione richiede la lavorazione e la filettatura della maniglia del bullone originale. Il pomello del bullone mini include una chiave da ½” per la rimozione della mira.
SPECIFICHE: lega di alluminio 7075 T6, anodizzato a finitura dura, finitura nera opaca o rossa lucida. Lunghezza 1½" (4cm), diametro .975" (24.7mm). Peso 1.3 oz. (35 g). Mini - Lunghezza – 1.21” Diametro – 0.90” Peso – 0.5 oz. Si consiglia l'installazione da parte di un armaiolo. 5/16-24 TPI.
Altro...
Punteggi dei clienti per BADGER ORDNANCE BLACK BOLT KNOB
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4.9
Mini Tactical Bolt handle(17.06.2013)
Great product, fitted onto my Rem 700 in .204 to help with clearance from scope when cycling action. Had previously had a look at full sized knobs but they didn't fit with the look and function I was chasing. If you are half capable, the job can be done at home with a hacksaw, file and die of the correct thread size. I will be purchasing a couple more for both my long range rig and target rifle, which has a particularly stiff bolt after firing.
More leverage than ever.(15.09.2009)
This is a must for anyone. Not only tactical shooters. This knob allows you to remove stuck cases better, faster cycling on the bolt and an overall easier grip.
i was looking for something to replace the standard bolt knob on my remington 700P and had seen several rifles with this knob on them, and decided i wanted something similar. after looking at what all was available i decided on this one because of the size dimensions and shape.
i ordered through brownells and got a fantastic price and they were the only place that had them in stock. kudos to brownells on that.
after getting my bolt back from AZ Precision, and taking it to the range, i have to say this bolt makes a HUGE difference. working the bolt is easier as the knob is far easier to get a hold of and fits my hand a lot better, the length of the bolt handle is extended by over an inch giving you better leverage, and since the knob is aluminum it doesnt at any weight! it is PERFECT for the serious shooter looking for a way to improve the function of their rifle. it makes rapid bolt manipulation so much easier you wont beleive it until you feel it for yourself.
This is a very affordable and very great upgrade, and this particular part, from this seller at this price is just fantastic. cannot be beat!
I have recommended this to three other friends who have long rifles and all will be purchasing and having this installed based on how well it works on mine.
Great Product(07.12.2009)
Put it on 2 of my rifles exellent quality and also very good looking but the most important thing is it holds very well against the elements.
A HELP IN TACTICAL AND HUNTING(24.01.2010)
This knob is the defacto standard when going with an over sized bolt knob. Better leverage for opening the bolt in any situation. I installed the knob myself but this should really be installed by someone what has a mil and knows what he is doing. A lot of material has to be removed and a mil works so much better than the belt sander I used. It took about 2+ hours and is not for the inexperienced or faint of heart. The original bolt must be "made round" (.313) then threaded with approx. 1/2 inch removed from the end of the bolt handle so the new knob can be screwed and glued on all the way. When finished you will be pleased with the looks,feel and ease of use.
Excellent addition to a bolt gun(27.02.2010)
I recently installed this product on my sniper rifle and could not be happier with the outcome. I installed the knob myself using a combination of a dremel tool with a reinforced cutting wheel, bench grinder and hand files. It took me slightly less than an hour and a half to complete the alteration to the bolt handle. Definitely not for the inexperienced to install. This is a great addition to the Remington weapon system.
A well designed, quality product....!(18.12.2010)
I installed this bolt knob on a customer's M77 SS bolt handle. The cast SS Ruger bolt handle was tough to machine and thread but the final result was spectacular. These knobs were designed for the Remington 700 but I have used them successfully on many different makes of rifle bolts. I would recommend this product be installed by a qualified machinist or gunsmith to achieve the best results.