Saves the frustration of trying to get the factory spring s crook back into the receiver. Fits all AK-47 and SAR-3 receivers.
Déclencheur à rupture nette aide à améliorer les performances
Évite la frustration de devoir remettre le ressort d'origine dans le récepteur. S'adapte à tous les récepteurs AK-47 et SAR-3.
Caractéristiques
Type d'arme:AK-47
Poids du colis:0.045kg
Hauteur d'expédition:5mm
Largeur d'expédition:84mm
Longueur d'expédition:99mm
Détails de l'article
Fabriqué au USA
US export classification: 0A501.x
Avis des clients
Notes des clients (9)
4.8 / 5
Fortement recommandé
Fits my O-PAP 10.04.2018
I put this in my Yugo O-Pap and it didnt appear to need any fitting. It went right in and appears to be working as designed.
Fortement recommandé
AK retaainer works perfect 31.01.2018
Works just as described and super simple installation. This part really makes assembly of the AK fire control group a snap.
Recommandé
Fitting needed for Yugos 11.12.2017
I installed this in my M92 PAP pistol. I had to file the notch for the trigger pin larger due to the distance between the trigger pin and safety selector hole being longer than designed. Overall good product but there might be a better part on the market for Yugos.
Fortement recommandé
One of the greatest things ever made!!! 08.06.2013
I will always buy one of these retainers before every build! The only negative was that I had to use a dremel to cut out a notch after adding a side mount for a scope. It would really be great if the notch that I had to add was already cut in so that I didn't have to do it!
Fortement recommandé
Good stuff. Fits Russian Saiga MK-03 27.05.2013
Purchased it for my Saiga MK-03. Installation takes 3 min. Works well - similar to the stock spring, but now it is much easier to assembly/disassembly trigger group.
Fortement recommandé
works great, highly recommend 05.02.2013
Works great and installs with no effort. Safety lever holds it in place. Very nice.
Fortement recommandé
worked and fit well on my mak 90 17.10.2012
Slipped right in with the tapco double hook trigger group. Did it job of locking the pin in well. Easy to install and well built quality product.
Recommandé
POWER CUSTOM TRIGGER PIN RETAINER PLATE 28.02.2011
Works great, easier to install than Tapco or that darn spring, might save you a minute's fooling around. But 2 1/2 times as expensive?
Fortement recommandé
great product 12.07.2010
Just likethe Krebs Custom retaining plate, and now you don't have to fool with that awful shephards crook. 5 second install, and much stronger than the factory thin wire, in most AK variants.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.
Transforme ton expérience avec le TRIGGER PIN RETAINER PLATE! ⚙️ Compatible AK-47, il simplifie l'installation et évite les tracas.
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Le déclencheur ALG AK offre un tir plus fluide et plus court que le déclencheur d'origine, parfait pour le combat et la défense à domicile.
Il est fabriqué en acier à outils S7 et a une finition en phosphate de manganèse, similaire aux déclencheurs AK d'origine.
La gâchette Lightning Bow procure une sensation confortable par rapport au déclencheur standard.
Le ressort principal à haute énergie ALG offre 25 % de couple en plus par rapport à un ressort d'origine.
Il est fabriqué en acier au silicium chromé selon les spécifications ASTM A401.
Ce ressort améliore le temps de verrouillage et la constance de l'allumage des amorces.
Réduit le claquement de la culasse et le recul ressenti.
S'installe facilement sans modifications permanentes de la carabine.
Compatible avec tous les modèles d'AK-47, Mak-90, Galil et Valmet.
Poignée MOE AK facile à installer, compatible avec les récepteurs renforcés et non renforcés.
Améliore l'ergonomie grâce à une texture agressive pour un meilleur contrôle de l'arme.
Construction en polymère renforcé en une seule pièce, compatible avec les cœurs de poignée Magpul pour personnaliser le stockage.