Use RCBS® Decapping dies to quickly remove primers from cases prior to cleaning. The Decap Die .22-.25 will handle most cases.
Altro...
I dies di decapping sono utilizzati per rimuovere i primer esausti da casi sparati prima della pulizia. Offriamo una selezione di dies di decapping da Sinclair, Redding, RCBS e Lee. Tutti questi dies possono decappare casi standard da 22 a 45 calibro. Redding offre un die separato per casi più lunghi di 2,5 pollici e un'asta di decapping opzionale per il loro piccolo die di decapping per casi PPC, BR, 17 e 20 calibro. I dies di Lee e RCBS sono solo per casi standard. Il nuovo Sinclair Stainless Decap Die include punte per fori di accensione standard e PPC/BR, e un'asta opzionale è disponibile per i casi da 17 e 20 calibro. Il Heavy Duty Die è progettato per l'uso su casi con crimpatura di primer militari di calibro superiore a .27.
Altro...
Punteggi dei clienti per RCBS .22-25 CALIBER HEAVY DUTY DECAPPING DIE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 2.3
Not a complete decap unit.(08.01.2016)
This is just the assembly that goes into the die. I bought this by mistake as I thought it was a complete unit. It has the spring tip as described in the decap die that has a review about breaking the spring.
Great Customer Service, terrible product(10.12.2014)
I bought one of these and decapped ~1000 rounds of 40 before the spring behind the pin got crushed. I emailed RCBS and they volunteered to send me a new pin and new spring. What I actually got was an entire new decapping punch assembly, 4 additional pins, and 3 additional springs. Great! Except, by the time I had decapped 1000 9mm rounds, I had gone through 2 springs already. In another 50, I went through a 3rd. I am on my last spring now and afraid to pull the handle. I have to hand it to RCBS on their customer service, but the design of this die is just not good. the pin hits the primer, compresses the spring and somewhere along the point of the spring compressing, it pops the primer out at light speed. if you run into any but the easiest of primers, however, the spring has to fully compress in order to knock the primer out, and it actually over compresses and gets crunched up inside the punch assembly.
Good product Awesome customer service(25.08.2014)
I picked up this decapping die when I first got into reloading. It makes short work of MOST of the primers and brass. I have only had issues with some 7.62 NATO rounds that have the primer crimped in (even then it's only a few that give me trouble). I'm impressed with the quality but the customer service was just awesome. When I first got this die, I was new to reloading. I was depriming a bunch of .44 Mag brass and without changing the shell holder I put in a 10mm case. The decapping pin didn't go through the flash hole and I broke it. I called RCBS and explained my rookie mistake, the guy on the other end had a laugh and told me he would replace the pin free of charge and send me an extra in case I pull a Dilbert again. Since then, I have had no issues with the product.
N. prodotto: 749002676 RCBS .22-25 CALIBER HEAVY DUTY DECAPPING DIE Parti Fabbricante: 87580076683875808 I dies di decapping sono utilizzati per rimuovere i primer esausti da casi sparati prima della pulizia. Offriamo una selezione di dies di decapping da Sinclair, Redding, RCBS e Lee. Tutti questi dies possono decappare casi standard da 22 a 45 calibro. Redding offre un die separato per casi più lunghi di 2,5 pollici e un'asta di decapping opzionale per il loro piccolo die di decapping per casi PPC, BR, 17 e 20 calibro. I dies di Lee e RCBS sono solo per casi standard. Il nuovo Sinclair Stainless Decap Die include punte per fori di accensione standard e PPC/BR, e un'asta opzionale è disponibile per i casi da 17 e 20 calibro. Il Heavy Duty Die è progettato per l'uso su casi con crimpatura di primer militari di calibro superiore a .27.
38.9CHF5CHF 38.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
I dies di decapping rimuovono i primer usati dalle cartucce sparate prima della pulizia.
Offriamo una selezione di dies di decapping di Sinclair, Redding, RCBS e Lee, compatibili con cartucce standard da 22 a 45 calibro.
Il Heavy Duty Die è progettato per cartucce militari con primer crimpati di calibro superiore a .27.
Caratteristiche
Matrice tipo:
Decapping Dies
Peso della spedizione: 0.635kgAltezza di spedizione: 43mmLarghezza di spedizione: 114mmLunghezza di spedizione: 150mm
UPC
: 076683875808
Dettagli dell'elemento
Made in Usa
Scopri il die di decapping universale RCBS per calibro .22-25. Rimuovi facilmente i primer esausti! 🔧 Perfetto per casi standard.
Use RCBS® Decapping dies to quickly remove primers from cases prior to cleaning. The Decap Die .22-.25 will handle most cases.
Altro...
I dies di decapping sono utilizzati per rimuovere i primer esausti da casi sparati prima della pulizia. Offriamo una selezione di dies di decapping da Sinclair, Redding, RCBS e Lee. Tutti questi dies possono decappare casi standard da 22 a 45 calibro. Redding offre un die separato per casi più lunghi di 2,5 pollici e un'asta di decapping opzionale per il loro piccolo die di decapping per casi PPC, BR, 17 e 20 calibro. I dies di Lee e RCBS sono solo per casi standard. Il nuovo Sinclair Stainless Decap Die include punte per fori di accensione standard e PPC/BR, e un'asta opzionale è disponibile per i casi da 17 e 20 calibro. Il Heavy Duty Die è progettato per l'uso su casi con crimpatura di primer militari di calibro superiore a .27.
Altro...
Punteggi dei clienti per RCBS .22-25 CALIBER HEAVY DUTY DECAPPING DIE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 2.3
Not a complete decap unit.(08.01.2016)
This is just the assembly that goes into the die. I bought this by mistake as I thought it was a complete unit. It has the spring tip as described in the decap die that has a review about breaking the spring.
Great Customer Service, terrible product(10.12.2014)
I bought one of these and decapped ~1000 rounds of 40 before the spring behind the pin got crushed. I emailed RCBS and they volunteered to send me a new pin and new spring. What I actually got was an entire new decapping punch assembly, 4 additional pins, and 3 additional springs. Great! Except, by the time I had decapped 1000 9mm rounds, I had gone through 2 springs already. In another 50, I went through a 3rd. I am on my last spring now and afraid to pull the handle. I have to hand it to RCBS on their customer service, but the design of this die is just not good. the pin hits the primer, compresses the spring and somewhere along the point of the spring compressing, it pops the primer out at light speed. if you run into any but the easiest of primers, however, the spring has to fully compress in order to knock the primer out, and it actually over compresses and gets crunched up inside the punch assembly.
Good product Awesome customer service(25.08.2014)
I picked up this decapping die when I first got into reloading. It makes short work of MOST of the primers and brass. I have only had issues with some 7.62 NATO rounds that have the primer crimped in (even then it's only a few that give me trouble). I'm impressed with the quality but the customer service was just awesome. When I first got this die, I was new to reloading. I was depriming a bunch of .44 Mag brass and without changing the shell holder I put in a 10mm case. The decapping pin didn't go through the flash hole and I broke it. I called RCBS and explained my rookie mistake, the guy on the other end had a laugh and told me he would replace the pin free of charge and send me an extra in case I pull a Dilbert again. Since then, I have had no issues with the product.