Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
Taglia il bossolo una volta—non tagliare mai più! Il X-Sizer Die sembra un normale Full Length Sizer Die. All'interno, il die presenta un mandrino appositamente progettato con una sfera espansore e un perno di decapping attaccato. Il mandrino è ciò che rende l'X-Die® unico. Il brevetto X-Sizer Die elimina la necessità di ripetuti tagli dopo un primo taglio di .020” dalla lunghezza massima del bossolo per standardizzare il bossolo. L'X-Die non accorcia la lunghezza del bossolo: il mandrino riduce il tasso di crescita mentre il bossolo cresce a causa del contatto della bocca del bossolo con il mandrino durante la formatura. Grazie a una tolleranza estremamente ravvicinata tra il mandrino e la parete del collo del die, la parete del collo del bossolo non si ispessisce mentre la lunghezza del bossolo viene riportata indietro. I bossoli ripetutamente formati nell'X-Die cresceranno inizialmente di qualche millesimo di pollice, per poi stabilizzarsi al di sotto della lunghezza massima del bossolo senza una perdita evidente di precisione o durata del bossolo.