Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Montage en acier durci entièrement usiné avec fixation à trois points, offrant une base stable et sécurisée pour monter de grandes lunettes d'objectif. Se fixe facilement au guide de chargeur en queue d'aronde et au taquet de montage du récepteur sans modifications du fusil. La vis de verrouillage avant lourde assure une stabilité à toute épreuve au niveau de l'anneau du récepteur. Le canal de visée permet l'utilisation de secours des organes de visée en fer sans retirer la lunette.
SPÉCIFICATIONS : Acier 4140, noir, finition nitrurée. Durci à Rc 60-62. 5,38" (13,6 cm) de long. 1,875" (4,7 cm) de haut. Pèse 10,9 oz (310 g).
Plus...
Évaluations client de SMITH ENTERPRISE M14 SCOPE MOUNT
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.3
Should have bought a Sadlak.(14.11.2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16.12.2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09.08.2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!
Référence: 851000001 SMITH ENTERPRISE M14 SCOPE MOUNT Ref Fabricant: 2006 Montage en acier durci entièrement usiné avec fixation à trois points, offrant une base stable et sécurisée pour monter de grandes lunettes d'objectif. Se fixe facilement au guide de chargeur en queue d'aronde et au taquet de montage du récepteur sans modifications du fusil. La vis de verrouillage avant lourde assure une stabilité à toute épreuve au niveau de l'anneau du récepteur. Le canal de visée permet l'utilisation de secours des organes de visée en fer sans retirer la lunette.
579.9CHF8CHF 579.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Montage en acier durci entièrement usiné avec fixation à trois points, offrant une base stable et sécurisée pour monter de grandes lunettes d'objectif. Se fixe facilement au guide de chargeur en queue d'aronde et au taquet de montage du récepteur sans modifications du fusil. La vis de verrouillage avant lourde assure une stabilité à toute épreuve au niveau de l'anneau du récepteur. Le canal de visée permet l'utilisation de secours des organes de visée en fer sans retirer la lunette.
SPÉCIFICATIONS : Acier 4140, noir, finition nitrurée. Durci à Rc 60-62. 5,38" (13,6 cm) de long. 1,875" (4,7 cm) de haut. Pèse 10,9 oz (310 g).
Plus...
Évaluations client de SMITH ENTERPRISE M14 SCOPE MOUNT
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.3
Should have bought a Sadlak.(14.11.2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16.12.2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09.08.2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!