Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

VANG COMP SYSTEMS
REMINGTON 870/11-87 12GA STAINLESS STEEL FOLLOWER

100002463

Strong, Dependable Replacement For Factory Followers

High-visibility stainless steel follower replaces the factory follower in Remington 870 and 11-87 shotguns. These are turned from a solid piece of stainless-steel bar-stock. This multitasking replacement for your factory-installed magazine follower travels smoother in your magazine tube due to its reduced bearing surface. Won’t break under spring pressure, won’t rust and holds up to years of shooting. Bright stainless steel makes it easy to see how many rounds are left in the magazine tube. Ribbed side and drilled out center hole reduce weight without jeopardizing overall strength. These followers are a slotted design. Available in 12 gauge.

SPECS: Stainless steel. 7⁄8" (2.2cm) diameter, 5⁄8" (1.6cm) thick.

Plus...

Remplacement solide et fiable pour les suiveurs d'origine

Ce suiveur en acier inoxydable haute visibilité remplace le suiveur d'origine dans les fusils de chasse Remington 870 et 11-87. Ces pièces sont usinées à partir d'un bloc solide d'acier inoxydable. Ce remplacement multifonction pour ton suiveur de magasin d'origine se déplace plus facilement dans le tube de ton magasin grâce à sa surface de contact réduite. Ne se casse pas sous la pression du ressort, ne rouille pas et résiste à des années de tir. L'acier inoxydable brillant te permet de voir facilement combien de cartouches restent dans le tube du magasin. Les côtés nervurés et le trou central percé réduisent le poids sans compromettre la résistance globale. Ces suiveurs ont un design fendu. Disponible en calibre 12.

CARACTÉRISTIQUES : Acier inoxydable. 7⁄8" (2,2 cm) de diamètre, 5⁄8" (1,6 cm) d'épaisseur.

Plus...

Évaluations client de VANG COMP SYSTEMS REMINGTON 870/11-87 12 GAUGE FOLLOWER, STAINLESS

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.9

Vang Comp Follower (04.03.2010)

Got this for my M930spx, Got rid of the cheapo plastic safety and the plastic follower with the VC stainless one. Just takes the doubt out of your combat weapon. A few less things for Murphy to mess with.

S/S Follower for Mossberg 590A1! (27.11.2010)

This S/S follower by VANG COMP SYSTEMS also fit and funtion perfectly with my Mossberg 590A1.

Great Replacement Follower (27.08.2011)

Excellent product. The SS follower was easy to replace the factory follower. The quality difference between the original factory follower and this follower is significant. The original was plastic, bright yellow, and flimsy in the tactical 870 I purchased. At the time of purchase I didn't know the tactical 870 was built on the express line of 870's. This replacement is just one of the many additions that needs to be done in order to make the express a more reliable gun.

Very nice. Very high quality. (23.09.2011)

Fits beautifully... no issues with mag tube extension. Looks great.

Nice follower (27.06.2012)

The only negative I can find is that I prefer the Brownells stainless and aluminum followers but this is also a quality part. Much better than the factory plastic piece.

A good improvement (24.04.2013)

I installed this a few days ago and it is smoother to load shells. You will have to grind off the two demples in the mag tube before incerting the follower. This was no problem using a dremel type tool.

Great Replacement (05.05.2013)

The old original follower was black plastic, could not see it, this one is bright SS, you can tell instantly when the tube is empty.

Excellent Follower (23.05.2015)

Overall this follower is great and highly recommended. It functions so much smoother than the original plastic garbage that comes with the 870. It is important to note that if your 870 have the dimples on the magazine tube, they need to be removed before you can use this follower (by either grinding them off or pressing them out with the proper tool). It is also important to note that this follower will hang up if you're using a tube extension and there is any kind of gap between the guns tube and the extensions tube. If you use a 2 piece tube extension design (tube and nut separate pieces like the Remington branded extensions) be sure to screw your extension all the way down until it contacts the guns tube and then torque the nut. Tube extensions with the nut built onto them (Nordic, Carlsons, Choat, etc) may have problems with this follower (or any other aftermarket follower). If you're not comfortable working on guns, then have a qualified gunsmith fit this part and remove the tube dimples for you.

Not much to say, it just works. (15.11.2016)

Not much to say about this one. It just works. Vang comp is now offering followers that are slotted for dimpled 870s. I have the brownells stainless follower in one 870 and this one in another. I prefer the vang comp because of the hole that is easy to feel when wearing gloves but they are both quality and reliable.

Great product (23.04.2017)

Have this follower in my 870 for sometime with zero issues. Quality, fit and finish is what I expect from Hans Vang and he has not let me

Down. It's a great product, easy to see and feel if wearing gloves, very smooth in the feed tube. You can't go wrong upgrading from

Cheap plastic follower that the Remington 870 comes with to the Vang.

Lire 10 plus d'avis sur brownells.com

36.9 36.9 1 CHF

Référence: 100002463
VANG COMP SYSTEMS REMINGTON 870/11-87 12 GAUGE FOLLOWER, STAINLESS
Ref Fabricant: NONE Ce suiveur en acier inoxydable haute visibilité remplace le suiveur d'origine dans les fusils de chasse Remington 870 et 11-87. Ces pièces sont usinées à partir d'un bloc solide d'acier inoxydable. Ce remplacement multifonction pour ton suiveur de magasin d'origine se déplace plus facilement dans le tube de ton magasin grâce à sa surface de contact réduite. Ne se casse pas sous la pression du ressort, ne rouille pas et résiste à des années de tir. L'acier inoxydable brillant te permet de voir facilement combien de cartouches restent dans le tube du magasin. Les côtés nervurés et le trou central percé réduisent le poids sans compromettre la résistance globale. Ces suiveurs ont un design fendu. Disponible en calibre 12.

36.9 CHF 0 CHF 36.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques: Calibre: Calibre 12 Manufacture: Remington Modèle: 11-87, 870

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Remplace le suiveur d'origine des fusils Remington 870 et 11-87 avec un suiveur en acier inoxydable haute visibilité.
Se déplace facilement dans le tube de chargeur grâce à sa surface de roulement réduite et résiste à la rouille.
Design fendu pour réduire le poids sans compromettre la résistance, permettant de voir facilement le nombre de cartouches restantes.

Caractéristiques

Calibre: Calibre 12 Manufacture: Remington Modèle: 11-87,870 Poids du colis: 0.005kg Hauteur d'expédition: 8mm Largeur d'expédition: 71mm Longueur d'expédition: 114mm

Détails de l'article

Fabriqué au USA

Améliore ton Remington 870/11-87 avec ce suiveur en acier inoxydable 🔧. Résistant, léger et facile à voir, il optimise ton expérience de tir.

Strong, Dependable Replacement For Factory Followers

SPECS: Stainless steel. 7⁄8" (2.2cm) diameter, 5⁄8" (1.6cm) thick.

Plus...

Remplacement solide et fiable pour les suiveurs d'origine

CARACTÉRISTIQUES : Acier inoxydable. 7⁄8" (2,2 cm) de diamètre, 5⁄8" (1,6 cm) d'épaisseur.

Plus...

Évaluations client de VANG COMP SYSTEMS REMINGTON 870/11-87 12 GAUGE FOLLOWER, STAINLESS

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.9

Vang Comp Follower (04.03.2010)

S/S Follower for Mossberg 590A1! (27.11.2010)

This S/S follower by VANG COMP SYSTEMS also fit and funtion perfectly with my Mossberg 590A1.

Great Replacement Follower (27.08.2011)

Very nice. Very high quality. (23.09.2011)

Fits beautifully... no issues with mag tube extension. Looks great.

Nice follower (27.06.2012)

The only negative I can find is that I prefer the Brownells stainless and aluminum followers but this is also a quality part. Much better than the factory plastic piece.

A good improvement (24.04.2013)