Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

MAGPUL
RSA™ RAIL SLING ATTACHMENT

873750005249 100006197

Clamp-On Loop Lets You Attach Your Sling Where You Need It

Low-profile sling loop clamps to any MIL-STD 1913 Picatinny or STANAG 4694 handguard rail to provide a secure forward attachment point for the Magpul MS2 or similar clip-on sling. Can be installed on left or right side of top rail, or side or bottom rails for multiple alternate sling configurations. Loop is angled to resist snagging on other gear. Rugged, all-steel construction withstands up to 300 pounds of stress pressure, so it won’t fail under hard use.

SPECS: Steel, MIL-DTL-16232 manganese phosphate coated, black. 2" (5cm) long x 1" (2.5cm) wide. Projects 3⁄16" (4.8mm) from rail. 1.3 oz. (87g) weight.

Plus...

La boucle à clip vous permet d'attacher votre sangle où vous en avez besoin

La boucle de sangle à profil bas se fixe à tout rail de garde-main Picatinny MIL-STD 1913 ou STANAG 4694 pour fournir un point d'attache avant sécurisé pour la sangle Magpul MS2 ou une sangle similaire à clip. Peut être installée sur le côté gauche ou droit du rail supérieur, ou sur les rails latéraux ou inférieurs pour plusieurs configurations alternatives de sangle. La boucle est inclinée pour résister aux accrochages avec d'autres équipements. Sa construction robuste en acier intégral supporte jusqu'à 300 livres de pression, elle ne cédera donc pas sous une utilisation intensive.

SPÉCIFICATIONS : Acier, revêtement en phosphate de manganèse MIL-DTL-16232, noir. 2" (5cm) de long x 1" (2.5cm) de large. Dépasse de 3⁄16" (4.8mm) du rail. Poids de 1.3 oz. (87g).

Plus...

Évaluations client de MAGPUL RSA PICATINNY RAIL SLING ATTACHMENT BLACK

Nombre d'évaluations: 13
De brownells.com: 13
Note moyenne: 4.8

Simple and nicely made. (07.02.2011)

No problems here... It's simple and just nicely made. Mounts snug and stays put!

Low Unobtrusive Solid (25.02.2011)

Bought two of these for my M-4's mount solid, out of the way, but easy to use, seem to be deat tough.

Great Product!! (30.03.2011)

Got this for my Ruger SR22 fits perfectly highest quality and design! Magpul are ROCKSTARS! [...] Thanks,Dan C

Does what it's intended to do perfectly. (15.05.2011)

I bought this to get a solid sling attachment point that won't move around and maybe get my sling twisted or tangled. I mounted it at the front of my handguard on the left rail, the loop pointed up. It's very low profile and doesn't get caught on anything. It's simple enough and curves around the handguard. Great little thing. I use it both on my issued rifle and on my rifle at home for competitions. Nothing bad to say about it.

RAIL SLING ATTACHMENT by MAGPUL (29.06.2011)

Defiantly all steel not super light weight but lighter then other models and styles does as advertised would recommmend

RSA from magpul (07.09.2011)

if you run the MS2 sling or do not have a regular sling ring on your front sight then this is a must for a 2 point configuration. light weight and easy to install and move.

Another Awesome Innovation From Magpul (07.11.2011)

I ordered this Magpul Rail Sling Attachment specifically for review for my fellow firearm entusiasts. I used this sling attachment on my newest AR-15 build. As always, Magpul never ceases to bring new innovative products to the firearms market.

Sling attachment has an excellent finish and is very high quality. It is very heavy duty and it shows. The sling attachment installs very easily to any part of your 1913 picatinny rail, by simply removing the allen screw. It works perfectly with Magpul's MS2 sling or any quick detach sling you may already have. If you would like to have a very high quality sling attachment that can be moved for different applications, then this is it! Highly recommended.

Nice! (12.01.2012)

quality construction, rounded edges that wont snag. I like how the loop curves down to keep a lower profile as well. Nothing to not like about this unit.

Nice mount, but causes me a little greif (04.04.2012)

Its a good mount but when using it with quad rails my MS2 sling binds up between the other rails and the mount. Its really annoying and its marking up the gun. I have to move my front sight and use it on the top rail for it work properly. If the ring wasn't shaped inward it wouldn't be as much as an issue.

Simple, solid, does the job its suppose (18.11.2012)

Magpul's RSA is a neat sling accessory attachment that is fairly solid and does the job it is designed to do. It is easy to install and straightforward to use. I like to see the price tag reduce a little bit, then I will give it a five star rating. This part is a cast steel and not as costly to manufacture as a fully machined component. Overall quality is excellent but the exterior finish has some blemishes or spots possibly due to case hardening.

Not for rail attached to AR15 front sigh (27.01.2016)

Purchased in the hope I could attach MS3 sling to installed rail of front sight post on AR15A2 rifle. While the RSA fit perfectly on the rail and is well made, the RSA has a 45degree offset toward the rifle centerline. When a paraclip was attached it slightly blocked the left wing of the front sight post and became a distraction when aiming. It would have been great if it offset was in the opposite direction. I had to return it.

Very versatile sling mount (01.09.2018)

I bought this to use on my duty AR. Once in hand I started getting ideas. This is avery versatile mount.

I now use one on the 12 o'clock rail of my Steyr Scout rifle, a Ruger GunSite Scout rifle, and both my personal and duty AR rifles, and am buying more for my son's rifles.

It is rugged and places the sling in a very useful location.

A Must Have (10.09.2018)

Amazing product. Will not falter. Will not fail. It's as solid as the A2 FSP. Reading most comments, i notice everyone who complains about it are the ones who attach it on funky side angles. I'm almost positive this was specifically designed to be placed in the top rail. Hence it being flat and LoPro. And it angles the attachment point down to the side and away from front sight. Avsolutely no con's. You will want this on your AR15.

P.s. ignore the post by the guy that said you can attach QD mounts to this because you absolutely can not. Theres no circle input to provide such an application.

<img width="500" src='/userdocs/reviewimages/e740bc6f-ff88-4bdd-9dc7-8b32696fc9f1.jpg' alt=''>

Lire 13 plus d'avis sur brownells.com

42.9 42.9 1 CHF

Référence: 100006197
MAGPUL RSA PICATINNY RAIL SLING ATTACHMENT BLACK
Ref Fabricant: MAG502-BLK 873750005249 La boucle de sangle à profil bas se fixe à tout rail de garde-main Picatinny MIL-STD 1913 ou STANAG 4694 pour fournir un point d'attache avant sécurisé pour la sangle Magpul MS2 ou une sangle similaire à clip. Peut être installée sur le côté gauche ou droit du rail supérieur, ou sur les rails latéraux ou inférieurs pour plusieurs configurations alternatives de sangle. La boucle est inclinée pour résister aux accrochages avec d'autres équipements. Sa construction robuste en acier intégral supporte jusqu'à 300 livres de pression, elle ne cédera donc pas sous une utilisation intensive.

42.9 CHF 155 CHF 42.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Couleur: Noir

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Fixe facilement sur n'importe quel rail Picatinny pour un point d'attache sécurisé.
Robuste construction en acier, supporte jusqu'à 300 livres de pression.
Peut être installé sur différents côtés du rail pour des configurations variées.

Caractéristiques

Couleur: Noir Poids du colis: 0.054kg Hauteur d'expédition: 25mm Largeur d'expédition: 25mm Longueur d'expédition: 165mm UPC : 873750005249

Détails de l'article

Fabriqué au USA

Découvrez le RSA™ RAIL SLING ATTACHMENT de MAGPUL ! 🔗 Fixez facilement votre sangle sur un rail Picatinny pour une utilisation optimale.

Clamp-On Loop Lets You Attach Your Sling Where You Need It

SPECS: Steel, MIL-DTL-16232 manganese phosphate coated, black. 2" (5cm) long x 1" (2.5cm) wide. Projects 3⁄16" (4.8mm) from rail. 1.3 oz. (87g) weight.

Plus...

La boucle à clip vous permet d'attacher votre sangle où vous en avez besoin

SPÉCIFICATIONS : Acier, revêtement en phosphate de manganèse MIL-DTL-16232, noir. 2" (5cm) de long x 1" (2.5cm) de large. Dépasse de 3⁄16" (4.8mm) du rail. Poids de 1.3 oz. (87g).

Plus...

Évaluations client de MAGPUL RSA PICATINNY RAIL SLING ATTACHMENT BLACK

Nombre d'évaluations: 13
De brownells.com: 13
Note moyenne: 4.8

Simple and nicely made. (07.02.2011)

No problems here... It's simple and just nicely made. Mounts snug and stays put!

Low Unobtrusive Solid (25.02.2011)

Bought two of these for my M-4's mount solid, out of the way, but easy to use, seem to be deat tough.

Great Product!! (30.03.2011)

Got this for my Ruger SR22 fits perfectly highest quality and design! Magpul are ROCKSTARS! [...] Thanks,Dan C

Does what it's intended to do perfectly. (15.05.2011)

RAIL SLING ATTACHMENT by MAGPUL (29.06.2011)

Defiantly all steel not super light weight but lighter then other models and styles does as advertised would recommmend

RSA from magpul (07.09.2011)

if you run the MS2 sling or do not have a regular sling ring on your front sight then this is a must for a 2 point configuration. light weight and easy to install and move.

Another Awesome Innovation From Magpul (07.11.2011)

Nice! (12.01.2012)

quality construction, rounded edges that wont snag. I like how the loop curves down to keep a lower profile as well. Nothing to not like about this unit.

Nice mount, but causes me a little greif (04.04.2012)