Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting. This latch features extra surface area to reach for when you need to charge your AR-15 rifle. Steel construction with a dark gray finish. Includes latch only, uses existing spring and roll pin. (Does not include spring or roll pin).
SPECS: Fits - AR15/M16 standard charging handles. Finish - Gray. Construction - Steel. Incldes - Latch only. Does not include roll pin or spring.
Plus...
Ne lutte plus jamais pour charger ton AR-15 ! Ce crochet de remplacement te permet d'accéder facilement à ta poignée de chargement. Particulièrement apprécié par ceux qui ont une lunette sur leur AR-15, ou par ceux qui portent des gants en tirant. Ce crochet dispose d'une surface supplémentaire pour faciliter le chargement de ton fusil AR-15. Construction en acier avec une finition gris foncé. Inclus uniquement le crochet, utilise le ressort et la goupille existants. (N'inclut pas le ressort ni la goupille).
SPÉCIFICATIONS : Compatible avec - poignées de chargement standard AR15/M16. Finition - Grise. Construction - Acier. Inclus - Crochet uniquement. N'inclut pas la goupille ou le ressort.
Plus...
Évaluations client de YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.6
BUY THIS(13.05.2015)
I bought one of these initially from a different website before Brownells started carrying it and was hooked instantly. Once Brownells picked them up I bought 3 more (and will probably buy another 3-4 eventually). A standard handle with this latch is comparable to a BCM large latch charging handle; not identical, and not exactly as good, but comparable. If you're on a budget, this is the way to go. Don't buy any other latches; I'm even considering replacing the PRI latch on my gas buster charging handle, because these are so much nicer. Gives more than enough purchase, isn't so thin that it hurts to pull back with a knife-style hand angle, and it's made by YHM instead of some random over-seas manufacturer like a lot of other latches. Buy this just to try it out. You won't regret it. I just wish I had 3 hands to make installing it easier.
YHM Charge Handle Latch(14.11.2015)
Purchased for a 5.56 gun that had a OEM latch.I have used the ambi type and square oversize type before on others.
After installing this one,I went back and bought a few more to replace my other upgraded ones.I kind of prefer the same feel on all the guns.Now I have put these on my ARs in 308 and 243 as well.
Yes I like this latch.
Only CON.The roll pin is kind of a tricky little deal.Careful the hole is lined up and do not beat it up and make it bigger(use the correct roll pin punch).Center punch next to the holes(lightly) when finished to hold the roll pin secure.Keep in mind the handle is aluminum.
Yankee Hill Latch(07.01.2016)
The pro's: great fit. wide handle with no rough edges and it was easy to install.
The Cons: it is NOT BLACK!!!! It is Battleship Gray! Not even in the realm of black.
I was sorely disappointed... It is advertised as BLACK. I now have a black rifle with a GRAY charging handle latch!
I will be contacting Brownells about the issue. They either need to correct their advertising or,if by some chance I got an odd one, check the product and ensure it matches the description before they ship it.
The photo doesn't show the gray well. It's far more gray than pic!
Great Value(21.03.2016)
Make no mistake, this is an oversized latch. Not as over-the-top as some others, but it sticks out a pretty decent length. Also note that it is more of a dull gray color - it doesn't necessarily look out of place on a black receiver, but it doesn't altogether match either. In any case, the function will please many, disengaging smoothly and promoting firm operation of the mechanism. For me it was actually a little too slick - the catch is smooth enough and the body engage-able enough that it created an impression of looseness that I don't think was actually there. But the edges are nicely rounded to avoid scrapes and excessive snagging, and the gray finish seems to hold up pretty well. It could do with just a bit of refinement as a design, but for such a great price, someone looking for an oversized latch won't be disappointed.
QUALITY!(03.08.2016)
This charging handle is easy in the hands. It is tough and easy to install. Works well with scoped weapons. Thank you Yankee Hill!
these work (01.11.2016)
These are easy to install and they increase the ability to grasp the charging handle. I use shooting gloves when at the range so this product is helpful, when using a scope or any thing that aids the sight profile.
Worth it(30.12.2016)
It isn't an exact match in color as others have stated. More of a blued steel than black anodized aluminum look. Doesn't bother me a bit. Works great. Feels natural in the hand when operating the CH. Does stick out far but not too far. Compared it to a Bcm/Vltor & it is just a hair shorter than their large model. I have several of the B/V CHs & now realize I could've just bought standard CHs & installed this latch on them which would've saved me some money. Only problem I foresee is if you use a sling & keep the gun close to your body, the latch could be uncomfortable sticking into your stomach or chest. I have seen this with the B/V large CH. That's why I'd prefer it to be slightly smaller, but it's still worth it. Easy install with a 1/16" punch. Does not include roll pin or spring in case anyone is wondering. I definitely recommend this latch if you need to upgrade from a standard one.
No Gunsmith Required(15.03.2017)
Easy to Install on my stock DPMS handle. Be careful of the spring. May require light sanding for some handles. Great for operating handle with left hand and perfect if you have full size optics mounted.
REAL DEAL HANDS DOWN(20.05.2017)
Built like a tank , fit Perfect , three min to install. I'm a self taught redneck AR builder that spent a few min online researching the best buy for the money . I found that every man card holding scope user must have. . just took 4 minutes to install. Beat that! Long live freedom flies!
Good low cost high value upgrade(28.12.2017)
Donât let the picture fool you itâs bigger and itâs definitely not black. Fairly easy to install if youâve built ARâs before. It really works well with or without optics. The latch is sturdy enough to rack with one finger. I installed it on my WMD nib-x coated charging handle and itâs so smooth
Référence: 100015922 YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH Ref Fabricant: YHM-281 Ne lutte plus jamais pour charger ton AR-15 ! Ce crochet de remplacement te permet d'accéder facilement à ta poignée de chargement. Particulièrement apprécié par ceux qui ont une lunette sur leur AR-15, ou par ceux qui portent des gants en tirant. Ce crochet dispose d'une surface supplémentaire pour faciliter le chargement de ton fusil AR-15. Construction en acier avec une finition gris foncé. Inclus uniquement le crochet, utilise le ressort et la goupille existants. (N'inclut pas le ressort ni la goupille).
32.9CHF4CHF 32.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Améliore le chargement de ton AR-15 avec ce crochet en acier 🛠️. Idéal pour les lunettes et les gants. Facile à installer, seulement le crochet inclus.
Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting. This latch features extra surface area to reach for when you need to charge your AR-15 rifle. Steel construction with a dark gray finish. Includes latch only, uses existing spring and roll pin. (Does not include spring or roll pin).
SPECS: Fits - AR15/M16 standard charging handles. Finish - Gray. Construction - Steel. Incldes - Latch only. Does not include roll pin or spring.
Plus...
Ne lutte plus jamais pour charger ton AR-15 ! Ce crochet de remplacement te permet d'accéder facilement à ta poignée de chargement. Particulièrement apprécié par ceux qui ont une lunette sur leur AR-15, ou par ceux qui portent des gants en tirant. Ce crochet dispose d'une surface supplémentaire pour faciliter le chargement de ton fusil AR-15. Construction en acier avec une finition gris foncé. Inclus uniquement le crochet, utilise le ressort et la goupille existants. (N'inclut pas le ressort ni la goupille).
SPÉCIFICATIONS : Compatible avec - poignées de chargement standard AR15/M16. Finition - Grise. Construction - Acier. Inclus - Crochet uniquement. N'inclut pas la goupille ou le ressort.
Plus...
Évaluations client de YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.6
BUY THIS(13.05.2015)
I bought one of these initially from a different website before Brownells started carrying it and was hooked instantly. Once Brownells picked them up I bought 3 more (and will probably buy another 3-4 eventually). A standard handle with this latch is comparable to a BCM large latch charging handle; not identical, and not exactly as good, but comparable. If you're on a budget, this is the way to go. Don't buy any other latches; I'm even considering replacing the PRI latch on my gas buster charging handle, because these are so much nicer. Gives more than enough purchase, isn't so thin that it hurts to pull back with a knife-style hand angle, and it's made by YHM instead of some random over-seas manufacturer like a lot of other latches. Buy this just to try it out. You won't regret it. I just wish I had 3 hands to make installing it easier.
YHM Charge Handle Latch(14.11.2015)
Purchased for a 5.56 gun that had a OEM latch.I have used the ambi type and square oversize type before on others.
After installing this one,I went back and bought a few more to replace my other upgraded ones.I kind of prefer the same feel on all the guns.Now I have put these on my ARs in 308 and 243 as well.
Yes I like this latch.
Only CON.The roll pin is kind of a tricky little deal.Careful the hole is lined up and do not beat it up and make it bigger(use the correct roll pin punch).Center punch next to the holes(lightly) when finished to hold the roll pin secure.Keep in mind the handle is aluminum.
Yankee Hill Latch(07.01.2016)
The pro's: great fit. wide handle with no rough edges and it was easy to install.
The Cons: it is NOT BLACK!!!! It is Battleship Gray! Not even in the realm of black.
I was sorely disappointed... It is advertised as BLACK. I now have a black rifle with a GRAY charging handle latch!
I will be contacting Brownells about the issue. They either need to correct their advertising or,if by some chance I got an odd one, check the product and ensure it matches the description before they ship it.
The photo doesn't show the gray well. It's far more gray than pic!
Great Value(21.03.2016)
Make no mistake, this is an oversized latch. Not as over-the-top as some others, but it sticks out a pretty decent length. Also note that it is more of a dull gray color - it doesn't necessarily look out of place on a black receiver, but it doesn't altogether match either. In any case, the function will please many, disengaging smoothly and promoting firm operation of the mechanism. For me it was actually a little too slick - the catch is smooth enough and the body engage-able enough that it created an impression of looseness that I don't think was actually there. But the edges are nicely rounded to avoid scrapes and excessive snagging, and the gray finish seems to hold up pretty well. It could do with just a bit of refinement as a design, but for such a great price, someone looking for an oversized latch won't be disappointed.
QUALITY!(03.08.2016)
This charging handle is easy in the hands. It is tough and easy to install. Works well with scoped weapons. Thank you Yankee Hill!
these work (01.11.2016)
These are easy to install and they increase the ability to grasp the charging handle. I use shooting gloves when at the range so this product is helpful, when using a scope or any thing that aids the sight profile.
Worth it(30.12.2016)
It isn't an exact match in color as others have stated. More of a blued steel than black anodized aluminum look. Doesn't bother me a bit. Works great. Feels natural in the hand when operating the CH. Does stick out far but not too far. Compared it to a Bcm/Vltor & it is just a hair shorter than their large model. I have several of the B/V CHs & now realize I could've just bought standard CHs & installed this latch on them which would've saved me some money. Only problem I foresee is if you use a sling & keep the gun close to your body, the latch could be uncomfortable sticking into your stomach or chest. I have seen this with the B/V large CH. That's why I'd prefer it to be slightly smaller, but it's still worth it. Easy install with a 1/16" punch. Does not include roll pin or spring in case anyone is wondering. I definitely recommend this latch if you need to upgrade from a standard one.
No Gunsmith Required(15.03.2017)
Easy to Install on my stock DPMS handle. Be careful of the spring. May require light sanding for some handles. Great for operating handle with left hand and perfect if you have full size optics mounted.
REAL DEAL HANDS DOWN(20.05.2017)
Built like a tank , fit Perfect , three min to install. I'm a self taught redneck AR builder that spent a few min online researching the best buy for the money . I found that every man card holding scope user must have. . just took 4 minutes to install. Beat that! Long live freedom flies!
Good low cost high value upgrade(28.12.2017)
Donât let the picture fool you itâs bigger and itâs definitely not black. Fairly easy to install if youâve built ARâs before. It really works well with or without optics. The latch is sturdy enough to rack with one finger. I installed it on my WMD nib-x coated charging handle and itâs so smooth