Super-Soft "Carding" Wheel For Rust/IM Bluing At Economical Price
Found for us by Ray Hall, Griffith, IN, these baby-soft wire wheels are perfect for carding between coats when rust bluing, or when using the Hot Water Method with Dicropan IM Bluing Solution. Won't remove metal, or give "satin" look.
SPECS: 6" (15.2cm) diameter wheels available in 2 row and 4 row. .0025" diameter stainless steel wire. Staggered rows of 1-3⁄4" (4.44cm) long, tufted bristles. 1⁄4" (6.35mm) hole through 2" (51mm) diameter wood center (drill to fit). 2 row has ½" (13mm) wide face. 4 row has 1-1⁄4" (32mm) wide face. Maximum RPM 3500.
Altro...
Ruota "Carding" Super-Morbida per Rust/IM Bluing a Prezzo Economico
Trovate per noi da Ray Hall, Griffith, IN, queste ruote in filo estremamente morbide sono perfette per la cardatura tra i rivestimenti durante il rust bluing, o quando si utilizza il Metodo dell'Acqua Calda con la Soluzione di Bluing Dicropan IM. Non rimuovono metallo e non danno un aspetto "satinato".
SPECS: Ruote di 6" (15,2 cm) di diametro disponibili in 2 file e 4 file. Filo di acciaio inossidabile di .0025" di diametro. File sfalsate di 1-3⁄4" (4,44 cm) di lunghezza, setole a ciuffo. Foro di 1⁄4" (6,35 mm) attraverso il centro in legno di 2" (51 mm) di diametro (forare per adattarsi). La versione a 2 file ha una faccia larga ½" (13 mm). La versione a 4 file ha una faccia larga 1-1⁄4" (32 mm). RPM massimo 3500.
Altro...
Punteggi dei clienti per GROBET FILE CO. OF AMERICA INC 4 ROW SUPER-SOFT CARDING WHEEL
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 5
Great Product(21.12.2010)
Works great, I just ran a long bolt though it to fabricate an an arbor and chucked it up in my drill press and it does a fantastic job as a carding wheel. Very nicely made for the money and perfect for the job.
Great Item for Rust Blueing(21.03.2011)
I used this to card my double shotgun barrels after rust bluing. Brush has a 1/4 arbor hole, so I just put a long bolt on it and chucked it up in the drill press at about 500 rpm. Really cuts down on time and leaves a great finish. This is baby soft. Almost impossible to overpolish.
If you're rust bluing on the cheap - this is the one thing worth splurging on.
Essential for Slow Rust Blueing(01.04.2011)
The bristles on this wheel are so fine they feel like a paint brush. It is perfect for carding the soft oxidation formed from the boiling steps of original Slow Rust Blueing. I set mine up in a drill press so I can have lots of room to move around and a slow speed that's impossible with a buffer or grinder motor. It works beautifully.
This makes "Slow Rust Blueing" a little(04.12.2011)
I slow rust blue all my projects. This product speeds it up some. It is very soft and does a great job of carding and leaving a very even finish. Highly recommend this product!!!!
Perfect(17.02.2014)
This is the carding wheel to buy for great results. The finish it produces is beautiful!
Perfect, Thanks Brownells(08.05.2018)
I use this everyday with Pilkingtons. Well made, perfect for rust bluing and it doesn't' cost a ton. Run it slow, high speed buffer/grinder will ruin it and your work.
I didn't want to put it in my drill press because i wanted a vertical spin not horizontal which is more comfortable for me and works better for long guns. So I put a long bolt through it, chucked in a 3/8 drill, and clamped the drill in a vice. A wire tie on the trigger to give the speed I want and I have made a couple thousand dollars with it. Buying another one right now.
Works great for rust bluing(02.01.2011)
My first attempt at rust bluing involved an 1895 Colt New Navy revolver. This carding wheel turned the rough black finish that emerged from the rusting and boiling steps into a beautiful finish. The wire bristles are tough enough to remove the rough black, but soft enough to polish without scratching.
N. prodotto: 360164631 GROBET FILE CO. OF AMERICA INC 4 ROW SUPER-SOFT CARDING WHEEL Parti Fabbricante: 16463 Trovate per noi da Ray Hall, Griffith, IN, queste ruote in filo estremamente morbide sono perfette per la cardatura tra i rivestimenti durante il rust bluing, o quando si utilizza il Metodo dell'Acqua Calda con la Soluzione di Bluing Dicropan IM. Non rimuovono metallo e non danno un aspetto "satinato".
54.9CHF0CHF 54.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Ruote in filo morbido ideali per la cardatura senza rimuovere metallo.
Disponibili in versioni a 2 righe e 4 righe, con diverse larghezze di faccia.
Massimo RPM di 3500, adatte per l'uso con il Metodo dell'Acqua Calda e la Soluzione Bluante Dicropan IM.
Caratteristiche
Peso della spedizione: 0.249kgAltezza di spedizione: 43mmLarghezza di spedizione: 155mmLunghezza di spedizione: 157mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 360164581 GROBET FILE CO. OF AMERICA INC 2 ROW SUPER-SOFT CARDING WHEEL Parti Fabbricante: 16.458 Trovate per noi da Ray Hall, Griffith, IN, queste ruote in filo estremamente morbide sono perfette per la cardatura tra i rivestimenti durante il rust bluing, o quando si utilizza il Metodo dell'Acqua Calda con la Soluzione di Bluing Dicropan IM. Non rimuovono metallo e non danno un aspetto "satinato".
42.9CHF110CHF 42.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Super-Soft "Carding" Wheel For Rust/IM Bluing At Economical Price
Found for us by Ray Hall, Griffith, IN, these baby-soft wire wheels are perfect for carding between coats when rust bluing, or when using the Hot Water Method with Dicropan IM Bluing Solution. Won't remove metal, or give "satin" look.
SPECS: 6" (15.2cm) diameter wheels available in 2 row and 4 row. .0025" diameter stainless steel wire. Staggered rows of 1-3⁄4" (4.44cm) long, tufted bristles. 1⁄4" (6.35mm) hole through 2" (51mm) diameter wood center (drill to fit). 2 row has ½" (13mm) wide face. 4 row has 1-1⁄4" (32mm) wide face. Maximum RPM 3500.
Altro...
Ruota "Carding" Super-Morbida per Rust/IM Bluing a Prezzo Economico
Trovate per noi da Ray Hall, Griffith, IN, queste ruote in filo estremamente morbide sono perfette per la cardatura tra i rivestimenti durante il rust bluing, o quando si utilizza il Metodo dell'Acqua Calda con la Soluzione di Bluing Dicropan IM. Non rimuovono metallo e non danno un aspetto "satinato".
SPECS: Ruote di 6" (15,2 cm) di diametro disponibili in 2 file e 4 file. Filo di acciaio inossidabile di .0025" di diametro. File sfalsate di 1-3⁄4" (4,44 cm) di lunghezza, setole a ciuffo. Foro di 1⁄4" (6,35 mm) attraverso il centro in legno di 2" (51 mm) di diametro (forare per adattarsi). La versione a 2 file ha una faccia larga ½" (13 mm). La versione a 4 file ha una faccia larga 1-1⁄4" (32 mm). RPM massimo 3500.
Altro...
Punteggi dei clienti per GROBET FILE CO. OF AMERICA INC 4 ROW SUPER-SOFT CARDING WHEEL
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 5
Great Product(21.12.2010)
Works great, I just ran a long bolt though it to fabricate an an arbor and chucked it up in my drill press and it does a fantastic job as a carding wheel. Very nicely made for the money and perfect for the job.
Great Item for Rust Blueing(21.03.2011)
I used this to card my double shotgun barrels after rust bluing. Brush has a 1/4 arbor hole, so I just put a long bolt on it and chucked it up in the drill press at about 500 rpm. Really cuts down on time and leaves a great finish. This is baby soft. Almost impossible to overpolish.
If you're rust bluing on the cheap - this is the one thing worth splurging on.
Essential for Slow Rust Blueing(01.04.2011)
The bristles on this wheel are so fine they feel like a paint brush. It is perfect for carding the soft oxidation formed from the boiling steps of original Slow Rust Blueing. I set mine up in a drill press so I can have lots of room to move around and a slow speed that's impossible with a buffer or grinder motor. It works beautifully.
This makes "Slow Rust Blueing" a little(04.12.2011)
I slow rust blue all my projects. This product speeds it up some. It is very soft and does a great job of carding and leaving a very even finish. Highly recommend this product!!!!
Perfect(17.02.2014)
This is the carding wheel to buy for great results. The finish it produces is beautiful!
Perfect, Thanks Brownells(08.05.2018)
I use this everyday with Pilkingtons. Well made, perfect for rust bluing and it doesn't' cost a ton. Run it slow, high speed buffer/grinder will ruin it and your work.
I didn't want to put it in my drill press because i wanted a vertical spin not horizontal which is more comfortable for me and works better for long guns. So I put a long bolt through it, chucked in a 3/8 drill, and clamped the drill in a vice. A wire tie on the trigger to give the speed I want and I have made a couple thousand dollars with it. Buying another one right now.
Works great for rust bluing(02.01.2011)
My first attempt at rust bluing involved an 1895 Colt New Navy revolver. This carding wheel turned the rough black finish that emerged from the rusting and boiling steps into a beautiful finish. The wire bristles are tough enough to remove the rough black, but soft enough to polish without scratching.