Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

100002376
Named after the famous range on Long Island that hosted many long-range rifle competitions in the 1870s and ‘80s, the Creedmoor ladder-type sight is fully adjustable for windage and elevation and works equally well on cartridge rifles and muzzleloaders. Sight is precision machined from steel and attaches to tang with supplied setscrews and folds down when not in use. The Universal model is available in middle-range 2" and long-range 3" heights. The windage adjustment mechanism is on the eyepiece, allowing the eyepiece to dropped close to the base for close-in shots. The Soule model provides maximum adjustability to fit any hunting or target shooting conditions. Elevation is adjustable in precise increments of 1 MOA, and one full turn of the windage knob moves the point of aim left or right by 2½ MOA in ½ minute increments. Large knurled knob at the sight base allows fast, accurate return to center or previous setting. Choice of Short, Middle, and Long Range models. The “Goodwin” style sight was a popular sight for long range shooters in the late 1800s. The “flag” position allows for a very wide windage adjustment range of 1.26”. The elevation adjustment on the Goodwin has a range of 3.94”. With the Goodwin’s structure, the chamber can be easily accessed for cleaning or inspection. The Goodwin also has a “tilt” screw that allows the staff to be perfectly vertical at all elevations.

SPECS: Steel, blued. Elongated rear mounting hole allows installation on most rifles. Drilling and tapping of tang may be required. Distance between mounting holes 2.20”-2.29” (5.6-5.8cm). Mounting screws and installation instructions included.

254.9 254.9 1 CHF
N. prodotto: 100002376
DAVIDE PEDERSOLI S.R.L. RIFLE ADJ TANG CREEDMOOR UNIVERSAL LONG RANGE 3" BLACK
Parti Fabbricante: USA 430 Prende il nome dal famoso campo di tiro di Long Island che ha ospitato molte competizioni di fucili a lungo raggio negli anni 1870 e '80, il mirino a scala Creedmoor è completamente regolabile per deriva ed elevazione e funziona altrettanto bene su fucili a cartuccia e carabine ad avancarica. Il mirino è realizzato con precisione in acciaio e si attacca al tang con le viti di fissaggio fornite, ripiegandosi quando non è in uso. Il modello Universale è disponibile in altezze di medio raggio di 2" e di lungo raggio di 3". Il meccanismo di regolazione della deriva si trova sull'oculare, consentendo all'oculare di essere abbassato vicino alla base per tiri ravvicinati. Il modello Soule offre la massima regolabilità per adattarsi a qualsiasi condizione di caccia o tiro a segno. L'elevazione è regolabile in incrementi precisi di 1 MOA, e un giro completo della manopola della deriva sposta il punto di mira a sinistra o a destra di 2½ MOA in incrementi di ½ minuto. La grande manopola scanalata alla base del mirino consente un rapido e preciso ritorno al centro o alla impostazione precedente. Scelta tra modelli a corto, medio e lungo raggio. Il mirino in stile “Goodwin” era un mirino popolare per tiratori a lungo raggio alla fine del 1800. La posizione “bandiera” consente un'ampia gamma di regolazione della deriva di 1.26”. La regolazione dell'elevazione sul Goodwin ha un intervallo di 3.94”. Con la struttura del Goodwin, la camera può essere facilmente accessibile per la pulizia o l'ispezione. Il Goodwin ha anche una vite di “inclinazione” che consente di mantenere il staffa perfettamente verticale a tutte le elevazioni.
254.9 CHF 7 CHF 254.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Universal Rifles Colore: Black Tipo: Regolabili, Tang Sights

Top takeaways

  1. La mira a scala Creedmoor è completamente regolabile per deriva e elevazione, adatta per fucili a cartuccia e ad avancarica.
  2. Il modello Universale è disponibile in altezze intermedie di 2" e a lungo raggio di 3", con regolazione della deriva e dell'elevazione in incrementi precisi.
  3. La mira in stile “Goodwin” offre un'ampia gamma di regolazione della deriva e una facile accessibilità per la pulizia o l'ispezione.

Caratteristiche

Adatto per: Universal Rifles Colore: Black Tipo: Regolabili,Tang Sights Peso della spedizione: 0.249kg Altezza di spedizione: 43mm Larghezza di spedizione: 117mm Lunghezza di spedizione: 213mm




Scopri il mirino Creedmoor Universale 3" di Davide Pedersoli, regolabile e perfetto per fucili a lungo raggio 🎯. Massima precisione nel tiro!

Named after the famous range on Long Island that hosted many long-range rifle competitions in the 1870s and ‘80s, the Creedmoor ladder-type sight is fully adjustable for windage and elevation and works equally well on cartridge rifles and muzzleloaders. Sight is precision machined from steel and attaches to tang with supplied setscrews and folds down when not in use. The Universal model is available in middle-range 2" and long-range 3" heights. The windage adjustment mechanism is on the eyepiece, allowing the eyepiece to dropped close to the base for close-in shots. The Soule model provides maximum adjustability to fit any hunting or target shooting conditions. Elevation is adjustable in precise increments of 1 MOA, and one full turn of the windage knob moves the point of aim left or right by 2½ MOA in ½ minute increments. Large knurled knob at the sight base allows fast, accurate return to center or previous setting. Choice of Short, Middle, and Long Range models. The “Goodwin” style sight was a popular sight for long range shooters in the late 1800s. The “flag” position allows for a very wide windage adjustment range of 1.26”. The elevation adjustment on the Goodwin has a range of 3.94”. With the Goodwin’s structure, the chamber can be easily accessed for cleaning or inspection. The Goodwin also has a “tilt” screw that allows the staff to be perfectly vertical at all elevations.

SPECS: Steel, blued. Elongated rear mounting hole allows installation on most rifles. Drilling and tapping of tang may be required. Distance between mounting holes 2.20”-2.29” (5.6-5.8cm). Mounting screws and installation instructions included.