There's no need to go with a pistol-caliber specific AR lower on your next pistol-caliber carbine build. With the Stern Defense AR-15 9mm Conversion Adapter you have the ability to utilize popular pistol magazines which you may already have a supply of. Stern Defense make two differ models of their Conversion Adapter, one which uses Glock® magazines, and one which uses either Smith & Wesson M&P or Sig 320/250 magazines. The Stern Defense AR-15 9mm Conversion Adapter is easily installed into any mil-spec AR-15 lower receiver within seconds and even incorporates a last-round bolt hold open feature. Each adapter is machined from aluminum and requires the use of a 9mm/.40 S&W barrel and a Glock-cut bolt. Made of aircraft grade aluminum Lightweight, ergonomic design Installs in seconds If you’re considering converting your AR-15 to a 9mm, give the Stern Defense Adapter a thought!
Altro...
Converti facilmente il tuo lower in 9mm
Non c'è bisogno di utilizzare un lower AR specifico per calibri di pistola nel tuo prossimo progetto di carabina a calibro di pistola. Con l'adattatore di conversione AR-15 9mm di Stern Defense, hai la possibilità di utilizzare caricatori di pistola popolari che potresti già avere in stock. Stern Defense produce due modelli diversi del loro adattatore di conversione, uno che utilizza caricatori Glock® e uno che utilizza caricatori Smith & Wesson M&P o Sig 320/250. L'adattatore di conversione AR-15 9mm di Stern Defense si installa facilmente in qualsiasi lower receiver AR-15 conforme agli standard militari in pochi secondi e incorpora anche una funzione di bloccaggio del percussore all'ultimo colpo. Ogni adattatore è lavorato in alluminio e richiede l'uso di una canna 9mm/.40 S&W e di un percussore tagliato Glock. Realizzato in alluminio di grado aeronautico Design leggero ed ergonomico Si installa in pochi secondi Se stai considerando di convertire il tuo AR-15 in 9mm, prendi in considerazione l'adattatore di Stern Defense!
Altro...
Punteggi dei clienti per STERN DEFENSE AR-15 9MM COVERSION ADAPTER FOR BERETTA 92 MAGAZINES
Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 4.7
Great product so far.(25.06.2018)
Product is well machined and well thought out. The bolt hold open design works great as opposed to some others. Magazine release feels natural for both strong and weak side support. The only mod required was removal of the integral feed ramp because the upper is a Taccom ULW upper that already has a barrel ramp. Removing the ramp was easily accomplished with an allen wrench. The customer service rep at Stern was very helpful with this. Specs are as follows:
Taccom ULW complete upper with ramp and bolt mod,
Taccom adjustable buffer system,
Spikes mil spec multi cal lower,
Geissele of some kind
Stern 9mm Adapter(26.06.2018)
I bought this produce so I wouldnât have to but a different lower receiver. I did call Stern because it would not let me cycle the bolt with the adapter fully seated. I had bought a Foxtrot Mike upper. Stern said that for $7.50 they would mill .035 off the bolt plus shipping both ways. It works like a charm now. Very impressed with the product and Sternâs costumer service.
Use those Glock mags for PCC.(30.06.2018)
Works great with my FM upper after the bolt mod. Bolt hold open does not work with the Magpul mags. Works perfectly with glock and ETS
Building a 9mm AR Carbine on a budget can quickly become an expensive endeavor if you buy unreliable parts. The AR-15 9mm Conversion Adapter for Glock® Magazines by STERN DEFENSE Is a reliable way to use Glock magazines in a Mil-spec lower. I use it for USPSA PCC division and Steel Challenge matches to keep the feel of an M-4 and for training. Iâve personally tried other methods and this system is far superior. The feed ramp angle on 9mm is critical for proper function and reliability, with the vast array of projectile profiles. So far Iâve had luck with multiple types of 9mm projectiles I.E. Winchester 124gr FMJ, 145gr RN Bayou, and 147gr FP/HP Berryâs. The last round Bolt hold open is somewhat unnecessary for PCC, however, is great to feel the weight transfer of the bolt carrier group and buffer and have it lock on the last round.
The only feature that I dislike is the magazine release is located at the bottom of the unit which is not a big deal if your state allows âstandard capacityâ magazines. However, Iâd like index the same magazine release in the same configuration of an AR series firearm, which would be difficult without permanently modifying the magazine. Overall a great product the moment you open the package you can see that a lot of thought went into its development and manufacturer.
Awesome(21.08.2018)
Been looking for a reliable 9mm conversion for almost a year and after tons of researches (forum and YT), I decided to bite the bullet and purchase Stern Defense.
I have to say this thing is amazing, I installed this to my Anderson lower and it fits perfectly no play and nothing. To be on the safe side, I purchased Stern Defense Upper (from their website) paired with their H3 Buffer.
Went to the range today and shot 1000rounds and ZERO hiccup! I ran all kinds of ammo (freedommunitions 115/147gn, Fiocchi 115gn, and Sellier&Bellot 115gn)
All and all, I'm very satisfied with the product!
Not perfect but close(06.10.2018)
This adapter is fantastic. The pistol I used fed reliably from all the Glock mags that fit in the well, including 40 S&W and 357 SIG magazines. Installation and adjustment is a matter of turning in one screw to set it, and then two more for standoffs so it doesn't move around when you seat a new magazine.
The only reason I took off a star is because the mag release is a little awkward to use, the thing was very sticky with an aftermarket 9mm drum magazine, and the bolt hold open was a little hyper aggressive and held the bolt open with one still in the magazine.
N. prodotto: 100039214 STERN DEFENSE AR-15 9MM COVERSION ADAPTER FOR BERETTA 92 MAGAZINES Parti Fabbricante: 001SDMAGADB929M860141001591 Non c'è bisogno di utilizzare un lower AR specifico per calibri di pistola nel tuo prossimo progetto di carabina a calibro di pistola. Con l'adattatore di conversione AR-15 9mm di Stern Defense, hai la possibilità di utilizzare caricatori di pistola popolari che potresti già avere in stock. Stern Defense produce due modelli diversi del loro adattatore di conversione, uno che utilizza caricatori Glock® e uno che utilizza caricatori Smith & Wesson M&P o Sig 320/250. L'adattatore di conversione AR-15 9mm di Stern Defense si installa facilmente in qualsiasi lower receiver AR-15 conforme agli standard militari in pochi secondi e incorpora anche una funzione di bloccaggio del percussore all'ultimo colpo. Ogni adattatore è lavorato in alluminio e richiede l'uso di una canna 9mm/.40 S&W e di un percussore tagliato Glock. Realizzato in alluminio di grado aeronautico Design leggero ed ergonomico Si installa in pochi secondi Se stai considerando di convertire il tuo AR-15 in 9mm, prendi in considerazione l'adattatore di Stern Defense!
314.9CHF16CHF 314.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
L'adattatore di conversione AR-15 9mm di Stern Defense consente di utilizzare caricatori Beretta 92.
Si installa facilmente in pochi secondi in qualsiasi lower receiver AR-15 conforme agli standard militari.
Realizzato in alluminio di grado aeronautico, è leggero ed ergonomico, ideale per la conversione in 9mm.
Caratteristiche
Adatto per:
AR-15
Peso della spedizione: 0.318kgAltezza di spedizione: 89mmLarghezza di spedizione: 114mmLunghezza di spedizione: 178mm
UPC
: 860141001591
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
New
N. prodotto: 100027483 STERN DEFENSE AR-15 9MM CONVERSION ADAPTER FOR GLOCK® MAGAZINES Parti Fabbricante: 001-SD MAG-AD9-860141001508 Non c'è bisogno di utilizzare un lower AR specifico per calibri di pistola nel tuo prossimo progetto di carabina a calibro di pistola. Con l'adattatore di conversione AR-15 9mm di Stern Defense, hai la possibilità di utilizzare caricatori di pistola popolari che potresti già avere in stock. Stern Defense produce due modelli diversi del loro adattatore di conversione, uno che utilizza caricatori Glock® e uno che utilizza caricatori Smith & Wesson M&P o Sig 320/250. L'adattatore di conversione AR-15 9mm di Stern Defense si installa facilmente in qualsiasi lower receiver AR-15 conforme agli standard militari in pochi secondi e incorpora anche una funzione di bloccaggio del percussore all'ultimo colpo. Ogni adattatore è lavorato in alluminio e richiede l'uso di una canna 9mm/.40 S&W e di un percussore tagliato Glock. Realizzato in alluminio di grado aeronautico Design leggero ed ergonomico Si installa in pochi secondi Se stai considerando di convertire il tuo AR-15 in 9mm, prendi in considerazione l'adattatore di Stern Defense!
304.9CHF9CHF 304.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 100033498 STERN DEFENSE AR-15 9MM CONVERSION ADAPTER FOR S&W M&P/SIG 320 MAGAZINES Parti Fabbricante: 001SDMAGADMP9AN850001176217 Non c'è bisogno di utilizzare un lower AR specifico per calibri di pistola nel tuo prossimo progetto di carabina a calibro di pistola. Con l'adattatore di conversione AR-15 9mm di Stern Defense, hai la possibilità di utilizzare caricatori di pistola popolari che potresti già avere in stock. Stern Defense produce due modelli diversi del loro adattatore di conversione, uno che utilizza caricatori Glock® e uno che utilizza caricatori Smith & Wesson M&P o Sig 320/250. L'adattatore di conversione AR-15 9mm di Stern Defense si installa facilmente in qualsiasi lower receiver AR-15 conforme agli standard militari in pochi secondi e incorpora anche una funzione di bloccaggio del percussore all'ultimo colpo. Ogni adattatore è lavorato in alluminio e richiede l'uso di una canna 9mm/.40 S&W e di un percussore tagliato Glock. Realizzato in alluminio di grado aeronautico Design leggero ed ergonomico Si installa in pochi secondi Se stai considerando di convertire il tuo AR-15 in 9mm, prendi in considerazione l'adattatore di Stern Defense!
314.9CHF0CHF 314.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
There's no need to go with a pistol-caliber specific AR lower on your next pistol-caliber carbine build. With the Stern Defense AR-15 9mm Conversion Adapter you have the ability to utilize popular pistol magazines which you may already have a supply of. Stern Defense make two differ models of their Conversion Adapter, one which uses Glock® magazines, and one which uses either Smith & Wesson M&P or Sig 320/250 magazines. The Stern Defense AR-15 9mm Conversion Adapter is easily installed into any mil-spec AR-15 lower receiver within seconds and even incorporates a last-round bolt hold open feature. Each adapter is machined from aluminum and requires the use of a 9mm/.40 S&W barrel and a Glock-cut bolt. Made of aircraft grade aluminum Lightweight, ergonomic design Installs in seconds If you’re considering converting your AR-15 to a 9mm, give the Stern Defense Adapter a thought!
Altro...
Converti facilmente il tuo lower in 9mm
Non c'è bisogno di utilizzare un lower AR specifico per calibri di pistola nel tuo prossimo progetto di carabina a calibro di pistola. Con l'adattatore di conversione AR-15 9mm di Stern Defense, hai la possibilità di utilizzare caricatori di pistola popolari che potresti già avere in stock. Stern Defense produce due modelli diversi del loro adattatore di conversione, uno che utilizza caricatori Glock® e uno che utilizza caricatori Smith & Wesson M&P o Sig 320/250. L'adattatore di conversione AR-15 9mm di Stern Defense si installa facilmente in qualsiasi lower receiver AR-15 conforme agli standard militari in pochi secondi e incorpora anche una funzione di bloccaggio del percussore all'ultimo colpo. Ogni adattatore è lavorato in alluminio e richiede l'uso di una canna 9mm/.40 S&W e di un percussore tagliato Glock. Realizzato in alluminio di grado aeronautico Design leggero ed ergonomico Si installa in pochi secondi Se stai considerando di convertire il tuo AR-15 in 9mm, prendi in considerazione l'adattatore di Stern Defense!
Altro...
Punteggi dei clienti per STERN DEFENSE AR-15 9MM COVERSION ADAPTER FOR BERETTA 92 MAGAZINES
Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 4.7
Great product so far.(25.06.2018)
Product is well machined and well thought out. The bolt hold open design works great as opposed to some others. Magazine release feels natural for both strong and weak side support. The only mod required was removal of the integral feed ramp because the upper is a Taccom ULW upper that already has a barrel ramp. Removing the ramp was easily accomplished with an allen wrench. The customer service rep at Stern was very helpful with this. Specs are as follows:
Taccom ULW complete upper with ramp and bolt mod,
Taccom adjustable buffer system,
Spikes mil spec multi cal lower,
Geissele of some kind
Stern 9mm Adapter(26.06.2018)
I bought this produce so I wouldnât have to but a different lower receiver. I did call Stern because it would not let me cycle the bolt with the adapter fully seated. I had bought a Foxtrot Mike upper. Stern said that for $7.50 they would mill .035 off the bolt plus shipping both ways. It works like a charm now. Very impressed with the product and Sternâs costumer service.
Use those Glock mags for PCC.(30.06.2018)
Works great with my FM upper after the bolt mod. Bolt hold open does not work with the Magpul mags. Works perfectly with glock and ETS
Building a 9mm AR Carbine on a budget can quickly become an expensive endeavor if you buy unreliable parts. The AR-15 9mm Conversion Adapter for Glock® Magazines by STERN DEFENSE Is a reliable way to use Glock magazines in a Mil-spec lower. I use it for USPSA PCC division and Steel Challenge matches to keep the feel of an M-4 and for training. Iâve personally tried other methods and this system is far superior. The feed ramp angle on 9mm is critical for proper function and reliability, with the vast array of projectile profiles. So far Iâve had luck with multiple types of 9mm projectiles I.E. Winchester 124gr FMJ, 145gr RN Bayou, and 147gr FP/HP Berryâs. The last round Bolt hold open is somewhat unnecessary for PCC, however, is great to feel the weight transfer of the bolt carrier group and buffer and have it lock on the last round.
The only feature that I dislike is the magazine release is located at the bottom of the unit which is not a big deal if your state allows âstandard capacityâ magazines. However, Iâd like index the same magazine release in the same configuration of an AR series firearm, which would be difficult without permanently modifying the magazine. Overall a great product the moment you open the package you can see that a lot of thought went into its development and manufacturer.
Awesome(21.08.2018)
Been looking for a reliable 9mm conversion for almost a year and after tons of researches (forum and YT), I decided to bite the bullet and purchase Stern Defense.
I have to say this thing is amazing, I installed this to my Anderson lower and it fits perfectly no play and nothing. To be on the safe side, I purchased Stern Defense Upper (from their website) paired with their H3 Buffer.
Went to the range today and shot 1000rounds and ZERO hiccup! I ran all kinds of ammo (freedommunitions 115/147gn, Fiocchi 115gn, and Sellier&Bellot 115gn)
All and all, I'm very satisfied with the product!
Not perfect but close(06.10.2018)
This adapter is fantastic. The pistol I used fed reliably from all the Glock mags that fit in the well, including 40 S&W and 357 SIG magazines. Installation and adjustment is a matter of turning in one screw to set it, and then two more for standoffs so it doesn't move around when you seat a new magazine.
The only reason I took off a star is because the mag release is a little awkward to use, the thing was very sticky with an aftermarket 9mm drum magazine, and the bolt hold open was a little hyper aggressive and held the bolt open with one still in the magazine.