EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Altro...
104.9104.92CHF
N. prodotto: 296000772 EGW STEYR SBS PRO HUNTER SA 1-PIECE PICATINNY BASE 20 MOA Parti Fabbricante: 81072841370114658
104.9CHF0CHF 104.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: SteyrColore: BlackElevation: 20 MOAMateriale: AlluminioModello: SBSNumero di basi: 1 pezzoTipo: Picatinny RailTipo di azione: Short
Adatto per:
Steyr
Colore:
Black
Elevation:
20 MOA
Materiale:
Alluminio
Modello:
SBS
Numero di basi:
1 pezzo
Tipo:
Picatinny Rail
Tipo azione:
Short
Peso della spedizione: 0.102kg
UPC
: 841370114658
Dettagli dell'elemento
Made in Usa
N. prodotto: 296000771 EGW STEYR SBS PRO HUNTER SA 1-PIECE PICATINNY BASE 0 MOA Parti Fabbricante: 81070841370114641
104.9CHF0CHF 104.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: SteyrColore: BlackElevation: 0 MOAMateriale: AlluminioModello: SBSNumero di basi: 1 pezzoTipo: Picatinny RailTipo di azione: Short
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.