Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

MARBLE ARMS
TRITIUM SHOTGUN SIGHT

871373005530 579000080

Gets You On Target Quickly In Low & Regular Light

CNC-machined, steel sight uses eye-catching tritium to provide a fast sight picture in low light and an easily-noticeable, white ring for regular light. White ring is recessed to protect it from being scratched and to ensure proper light reflection from any angle.

SPECS: Steel, blued, matte finish. Approximately .32" (8.1mm) long, 3/16" (4.8mm) wide, .21" (5.4mm) high. 3/32" (2.4mm) shank length. See price line for thread diameter.

Altro...

Ti Porta Subito In Mira In Condizioni Di Bassa E Normale Illuminazione

Mirino in acciaio lavorato CNC, utilizza il trizio per fornire un'immagine del mirino veloce in condizioni di scarsa illuminazione e un anello bianco facilmente visibile per la luce normale. L'anello bianco è incassato per proteggerlo dai graffi e garantire una corretta riflessione della luce da qualsiasi angolazione.

SPECIFICHE: Acciaio, blu, finitura opaca. Lunghezza di circa .32" (8.1mm), larghezza di 3/16" (4.8mm), altezza di .21" (5.4mm). Lunghezza del gambo di 3/32" (2.4mm). Vedi la linea di prezzo per il diametro del filetto.

Altro...

Punteggi dei clienti per MARBLE ARMS 5X40 SIGHT

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4.1

Easy and worth while upgrade (26.04.2013)

As a replacement for the stock bead sight on a mossberg 590 with a breachers barrel (flash suppressor) it fit perfectly. In the light it's not noticeably different from the stock sight, and in the dark it's bright enough to see clearly - and not bright enough to attract the wrong attention.

Installation was a snap. I matched it up with the removed stock sight - and they where the same exact dimensions. I had read that I should expect to file some - but after installation there was no need.

Removal of the old was quick and easy, electrical tape over the jaws of a channel locks. I used red locktight on the new sight.

Thanks Brownels for having it in stock and quick delivery.

Broke Off on Install on Mossberg 590 (19.02.2018)

Got the brass bead on the Mossberg 590 Shockwave removed with no problems. Treaded in the Marbles replacement sight, got it about 1/2 way on and it snapped off. Very limited pressure applied. Now I have to try to get the piece out of the threads and try to replace it with another sight. $30 down the tube.

It is what it is. (05.08.2011)

It good for what it is. The dot glows as bright as my Sig night sights, was easy to install, and seems to be pretty durable. I don't know why the other reviewer was complaining that it washes out when looking at direct light, any sight will appear as a black dot. Great for my home defense shotgun.

Good all around drop in sight (01.08.2013)

I love this sight. It is a really big improvement over the tiny silver bead that came on my barrel. The installation was fairly simple, just had to make sure that the threaded hole was deburred around the edge after removal of the stock bead. Used blue loctite, adjusted it parallel to the vent rib and let it set up overnite. The white ring for daytime is awesome. In the dark the tritium bead is what you see. This is a very good all around sight for hunting, skeet shooting, and home defense.

Dot's to small (28.10.2009)

First this is a quality product. It is well made and installation was easy. I installed this on a short barreled Mossberg Maverick. My only complaint is that the tritium insert and the white dot around it are to small. In a very dark room the tritium does show up but is dim. In low light it is hard to see. Facing bright light the white circle surrounding the tritium washes out and you are left with a solid black post. I bought this product due to ease of installation but if I did it again I would pick a sight with a bigger dot or go with a fiber optic.

Trit goes all the way through! (12.02.2010)

Had one put on my 870 without seeing it and was shocked to find that the trit vial shows to the front also. Although it does glow a lot weaker on the muzzle side and can be covered with a Sharpie marker to stop forward illumination.

Dot is plenty bright and white ring is nice in daylight. Can't beat it for the price and it does not require epoxy like the XS sights.

It's Just Right (04.05.2012)

Used the 6X48 to replace the factory tritium bead that came installed in a Sage International ghost ring sight set many years ago. The Marble Arms bead was a perfect match. A drop of blue loctite and the bead screwed right in. It was properly indexed when tightened without shims in my case. Apparently current production has eliminated the "shine through both sides" mentioned in previous reviews. Would not have been a problem if it did as a drop of flat black paint or a Sharpie would take care of it.

The tritium is plenty bright and the white surround helps in daylight or twilight.

Good product.

Awesome item (02.10.2012)

This is a great item it shows up very well in low light conditions and I like to hunt in all kinds of weather conditions, even on those dull days.... I have one little fault I had to use thread lock....

Just right for Winchester 1300 Defender (19.04.2013)

Minor fitting required, took the threads down just a bit so it stayed clear of the barrel, but easy to do. It is a perfect replacement for the bead/fiber optic on my Winchester 1300 Defender. The original site is invisible in the dark, and this site is visible all the time. Exactly as I hoped it would be.

Just right (08.08.2018)

Fits Armscor M5 shotgun and is visible over the heat shield . Love this bead and it is MUCH cheaper than other big dot sights that one must epoxy on the barrel. Just go slow when installing, I like to treat the threads on something like this as if it were a tap(half turn stop reverse repeat) mine was little too long, no worries just a little trim on a hone fixed it. Use high heat loctite.

Leggi più recensioni su brownells.com

69.9 69.9 3 CHF

N. prodotto: 579000080
MARBLE ARMS 5X40 SIGHT
Parti Fabbricante: 054019 871373005530 Mirino in acciaio lavorato CNC, utilizza il trizio per fornire un'immagine del mirino veloce in condizioni di scarsa illuminazione e un anello bianco facilmente visibile per la luce normale. L'anello bianco è incassato per proteggerlo dai graffi e garantire una corretta riflessione della luce da qualsiasi angolazione.

69.9 CHF 3 CHF 69.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Universal Shotguns Colore delle mire: White Tipo: Trizio Beads

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Mirino in acciaio CNC con tritio per visibilità in condizioni di scarsa illuminazione.
Anello bianco incassato per protezione da graffi e corretta riflessione della luce.
Compatibile con fucili a pompa universali, con specifiche di dimensione precise.

Caratteristiche

Adatto per: Universal Shotguns Colore delle mire: White Tipo: Trizio Beads Peso della spedizione: 0.005kg Larghezza di spedizione: 83mm Lunghezza di spedizione: 146mm UPC : 871373005530

Dettagli dell'elemento

Made in Usa

N. prodotto: 579000077
MARBLE ARMS 3X56 SIGHT
Parti Fabbricante: 035619 871373005509 Mirino in acciaio lavorato CNC, utilizza il trizio per fornire un'immagine del mirino veloce in condizioni di scarsa illuminazione e un anello bianco facilmente visibile per la luce normale. L'anello bianco è incassato per proteggerlo dai graffi e garantire una corretta riflessione della luce da qualsiasi angolazione.

69.9 CHF 1 CHF 69.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Universal Shotguns Colore delle mire: White Tipo: Trizio Beads

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

N. prodotto: 579000078
MARBLE ARMS 6X48 SIGHT
Parti Fabbricante: 064823 871373005516 Mirino in acciaio lavorato CNC, utilizza il trizio per fornire un'immagine del mirino veloce in condizioni di scarsa illuminazione e un anello bianco facilmente visibile per la luce normale. L'anello bianco è incassato per proteggerlo dai graffi e garantire una corretta riflessione della luce da qualsiasi angolazione.

69.9 CHF 2 CHF 69.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Universal Shotguns Colore delle mire: White Tipo: Trizio Beads

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Scopri il mirino TRITIUM SHOTGUN SIGHT di MARBLE ARMS, ideale per condizioni di scarsa illuminazione! 🌙 Visibilità e precisione garantite.

Gets You On Target Quickly In Low & Regular Light

SPECS: Steel, blued, matte finish. Approximately .32" (8.1mm) long, 3/16" (4.8mm) wide, .21" (5.4mm) high. 3/32" (2.4mm) shank length. See price line for thread diameter.

Altro...

Ti Porta Subito In Mira In Condizioni Di Bassa E Normale Illuminazione

Altro...