Mounts on carry handle. Open sight channel allows use of sights. Cross-bar supports prevent crushing. Picatinny version has a true, Mil-SPec 1913 Picatinny cut along its entire length and accepts Picatinny rings.
SPECS: Aluminum, black, matte.7½" (19cm) long. 3½ oz. (99 g).
Altro...
Montaggio Veloce e Facile per Ottiche e Mirini a Punto
Si monta sul manico di trasporto. Il canale per la vista aperta consente l'uso delle mire. I supporti a barra trasversale prevengono schiacciamenti. La versione Picatinny ha un vero taglio Mil-Spec 1913 Picatinny lungo tutta la sua lunghezza e accetta anelli Picatinny.
SPECIFICHE: Alluminio, nero, opaco. 7½" (19cm) di lunghezza. 3½ oz. (99 g).
Altro...
Punteggi dei clienti per BROWNELLS PICATINNY CARRY HANDLE BASE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3.7
Not bad but not great(09.04.2010)
This mount is OK. To me it does not seem very stable for securing a scope and looks like there would be a lot of movement when fired. It also sticks out about 2 inches from the front of the carry handle and the peep sight hole is not aligned well so you lose some aiming ability but does still work. If I were buying this kind of item again I think I would go with a different one.
Decent Product! Not Plug & Play Though!(09.03.2011)
I agree with the Weaver Rail Review! Rail only has one factory mounting hole that didn't align with the hole in my handle. Overall length is 2" longer than my handle so that could be a plus or minus depending on your needs and cosmetic desires! Factory mounting screw is 1/4-20 thread so drill and tapping a new hole was a breeze if you're so inclined! Overall I was pleased with the rail and would recommend with precautions!
Great AR rail for moving scope forward(19.11.2017)
If you have an AR with the carry handle, and you want to mount a scope further forward than "normal," then this rail works great. It has Picatinny (MIL-STD-1913 rail) slots for the full length of 7.5" and the rail extends about 2.75" in front of the carry handle. This allows you to mount a scope far enough forward on your AR so that you can get a forward cheek weld on your stock while still allowing sufficient eye relief (distance from eye to back end of scope). It fits very well into the carry handle and then fastens in place with a thumb screw that passes through the carry handle hole. The threads are the very standard 1/4x20.
N. prodotto: 080000660 BROWNELLS PICATINNY CARRY HANDLE BASE Parti Fabbricante: 100247/100248050806006591 Si monta sul manico di trasporto. Il canale per la vista aperta consente l'uso delle mire. I supporti a barra trasversale prevengono schiacciamenti. La versione Picatinny ha un vero taglio Mil-Spec 1913 Picatinny lungo tutta la sua lunghezza e accetta anelli Picatinny.
54.9CHF0CHF 54.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Montaggio facile sul manico di trasporto con canale di mira aperto per l'uso delle mire.
Versione Picatinny con taglio Mil-Spec 1913 lungo tutta la lunghezza e supporti a traversa per prevenire la compressione.
Realizzato in alluminio nero opaco, misura 7½" (19 cm) di lunghezza e pesa 3½ oz. (99 g).
Caratteristiche
Adatto per:
AR-15
Colore:
Opaco Black
Materiale:
Alluminio
Numero di basi:
1 pezzo
Tipo:
Picatinny
Peso della spedizione: 0.023kgAltezza di spedizione: 18mmLarghezza di spedizione: 23mmLunghezza di spedizione: 203mm
UPC
: 050806006591
Dettagli dell'elemento
Made in Usa
Scopri il nostro AR-15/M16 Carry Handle Scope Base di BROWNELLS! 🔍 Realizzato in alluminio, compatibile con anelli Picatinny per una visione ottimale.
Mounts on carry handle. Open sight channel allows use of sights. Cross-bar supports prevent crushing. Picatinny version has a true, Mil-SPec 1913 Picatinny cut along its entire length and accepts Picatinny rings.
SPECS: Aluminum, black, matte.7½" (19cm) long. 3½ oz. (99 g).
Altro...
Montaggio Veloce e Facile per Ottiche e Mirini a Punto
Si monta sul manico di trasporto. Il canale per la vista aperta consente l'uso delle mire. I supporti a barra trasversale prevengono schiacciamenti. La versione Picatinny ha un vero taglio Mil-Spec 1913 Picatinny lungo tutta la sua lunghezza e accetta anelli Picatinny.
SPECIFICHE: Alluminio, nero, opaco. 7½" (19cm) di lunghezza. 3½ oz. (99 g).
Altro...
Punteggi dei clienti per BROWNELLS PICATINNY CARRY HANDLE BASE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3.7
Not bad but not great(09.04.2010)
This mount is OK. To me it does not seem very stable for securing a scope and looks like there would be a lot of movement when fired. It also sticks out about 2 inches from the front of the carry handle and the peep sight hole is not aligned well so you lose some aiming ability but does still work. If I were buying this kind of item again I think I would go with a different one.
Decent Product! Not Plug & Play Though!(09.03.2011)
I agree with the Weaver Rail Review! Rail only has one factory mounting hole that didn't align with the hole in my handle. Overall length is 2" longer than my handle so that could be a plus or minus depending on your needs and cosmetic desires! Factory mounting screw is 1/4-20 thread so drill and tapping a new hole was a breeze if you're so inclined! Overall I was pleased with the rail and would recommend with precautions!
Great AR rail for moving scope forward(19.11.2017)
If you have an AR with the carry handle, and you want to mount a scope further forward than "normal," then this rail works great. It has Picatinny (MIL-STD-1913 rail) slots for the full length of 7.5" and the rail extends about 2.75" in front of the carry handle. This allows you to mount a scope far enough forward on your AR so that you can get a forward cheek weld on your stock while still allowing sufficient eye relief (distance from eye to back end of scope). It fits very well into the carry handle and then fastens in place with a thumb screw that passes through the carry handle hole. The threads are the very standard 1/4x20.