The RCBS 3-Way Cutter is designed for use on Trim Pro Case Trimmers and reduces the trimming /deburring chore. The 3-Way Cutter not only trims cases to lengths but an inside blade chamfers the case while an outside blade deburrs it. Install on all Trim Pro Case Trimmers. Order one 3-Way Cutter by caliber and then simply order additional chamfer/pilots for other calibers.
Altro...
Il Cutter 3-Way RCBS è progettato per l'uso sui Trimmer per casi Trim Pro e riduce il compito di rifilatura/deburring. Il Cutter 3-Way non solo rifila i casi a lunghezze specifiche, ma una lama interna smussa il caso mentre una lama esterna lo deburra. Installa su tutti i Trimmer per casi Trim Pro. Ordina un Cutter 3-Way per calibro e poi ordina semplicemente ulteriori smussatori/piloti per altri calibri.
Altro...
Punteggi dei clienti per RCBS 22 CALIBER 3-WAY CUTTER
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4.4
Excellent Product(28.02.2017)
This product produces excellent trimming. Very easily installed and easy to clean.
Outstanding Idea!(25.03.2012)
I use this on the motorized Trim Pro and it significantly reduces the prep time spent on each case. This is a great idea and works great even if you only neck-size your cases.
Great time saver(26.03.2013)
This tool makes a tedious job almost enjoyable. It took about 5 minutes to set up using the supplied instructions, and does a great job of trimming, chamfering and deburring case necks all in one step. As an added bonus, because there is no "flash" around the necks after the cut, the cases just pop right off. I wish I had found this 35 years ago when I started reloading.
On top of that, RCBS service is awesome. I had an older model cutter that does not allow the cutting head to be removed. After over 30 years, it was so dull it just wouldn't cut. I e-mailed RCBS asking if I could purchase a replacement cutter. They sent me a new shaft and removable cutter - FREE! That kind of service keeps me coming back.
Not meant for electric Trim Pro(14.05.2018)
I have a Trim Pro 2 (powered version.) When contacted, RCBS says it is not meant for their power version. I find that with care and extra attention, it will work (cases tend to fly across the room when withdrawing the cutting head and the torque can spin the case even when "securely" locked in position.) They advise the head may wear out more quickly. As stated, with care, it seems to do a good job. I use for .223 and .30 cal. RCBS support is great, a real positive!
Excellent(06.02.2012)
This Could be one of the best time saving tools I have in brass prep. Works precisely as advertised and very easy to replace the standard cutting head and set up. Trim length is adjusted as normal. Inside deburring is accomplished by loosening the pilot and moving in and out to desired cut - then lock in place. Outside chamfer is done by loosening set screw and turning the knob to lower the blade onto the outside rim of the case. Took less than 4-5 minutes to figure out and set up for the first time and every case comes out perfect. Used with my drill on the trim pro shaft, I can easily complete about 8- 10 rounds per minute
Magic(09.02.2011)
Now if you ever want to save yourself many hours at the reloading bench then this is the most magnificant tool one could ever buy. Just screw it onto your existing RCBS Trimmer and adjust to suit your brass and just like magic...Its job done. No more pain involved in deburing by hand... The only downside I can think of is that I didnt get one earlier than I did...
3 way cutter(10.04.2016)
Bought this thinking I would save time on my brand new brass for 6mm br and it scratched the hell out of the inside of the neck on my dollar a piece Lapua brass. Also leaves too much chamfer for my liking, I'll stick with my torpedo chamfer/debur tool.
Would be fine for hunting ammo but not for Benchrest use.
N. prodotto: 749006053 RCBS 22 CALIBER 3-WAY CUTTER Parti Fabbricante: 90278076683902788 Il Cutter 3-Way RCBS è progettato per l'uso sui Trimmer per casi Trim Pro e riduce il compito di rifilatura/deburring. Il Cutter 3-Way non solo rifila i casi a lunghezze specifiche, ma una lama interna smussa il caso mentre una lama esterna lo deburra. Installa su tutti i Trimmer per casi Trim Pro. Ordina un Cutter 3-Way per calibro e poi ordina semplicemente ulteriori smussatori/piloti per altri calibri.
94.9CHF1CHF 94.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Il Cutter 3-Way RCBS è progettato per l'uso sui Trimmer per casi Trim Pro.
Rifila i casi alla lunghezza desiderata, smussando e sbavando contemporaneamente.
Installabile su tutti i Trimmer per casi Trim Pro e disponibile per diversi calibri.
Caratteristiche
Calibro:
22 Calibro (.223-.224)
Peso della spedizione: 0.091kgAltezza di spedizione: 48mmLarghezza di spedizione: 58mmLunghezza di spedizione: 97mm
UPC
: 076683902788
Dettagli dell'elemento
Made in Usa
N. prodotto: 749006054 RCBS 30 CALIBER 3-WAY CUTTER Parti Fabbricante: 90284076683902849 Il Cutter 3-Way RCBS è progettato per l'uso sui Trimmer per casi Trim Pro e riduce il compito di rifilatura/deburring. Il Cutter 3-Way non solo rifila i casi a lunghezze specifiche, ma una lama interna smussa il caso mentre una lama esterna lo deburra. Installa su tutti i Trimmer per casi Trim Pro. Ordina un Cutter 3-Way per calibro e poi ordina semplicemente ulteriori smussatori/piloti per altri calibri.
94.9CHF4CHF 94.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 749005903 RCBS 338 CALIBER 3-WAY CUTTER Parti Fabbricante: 90287076683902870 Il Cutter 3-Way RCBS è progettato per l'uso sui Trimmer per casi Trim Pro e riduce il compito di rifilatura/deburring. Il Cutter 3-Way non solo rifila i casi a lunghezze specifiche, ma una lama interna smussa il caso mentre una lama esterna lo deburra. Installa su tutti i Trimmer per casi Trim Pro. Ordina un Cutter 3-Way per calibro e poi ordina semplicemente ulteriori smussatori/piloti per altri calibri.
94.9CHF2CHF 94.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 749006061 RCBS 6MM TRIM PRO 3-WAY CUTTER Parti Fabbricante: 90279076683902795 Il Cutter 3-Way RCBS è progettato per l'uso sui Trimmer per casi Trim Pro e riduce il compito di rifilatura/deburring. Il Cutter 3-Way non solo rifila i casi a lunghezze specifiche, ma una lama interna smussa il caso mentre una lama esterna lo deburra. Installa su tutti i Trimmer per casi Trim Pro. Ordina un Cutter 3-Way per calibro e poi ordina semplicemente ulteriori smussatori/piloti per altri calibri.
94.9CHF1CHF 94.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 749006007 RCBS 6.5MM 3-WAY CUTTER Parti Fabbricante: 90281076683902818 Il Cutter 3-Way RCBS è progettato per l'uso sui Trimmer per casi Trim Pro e riduce il compito di rifilatura/deburring. Il Cutter 3-Way non solo rifila i casi a lunghezze specifiche, ma una lama interna smussa il caso mentre una lama esterna lo deburra. Installa su tutti i Trimmer per casi Trim Pro. Ordina un Cutter 3-Way per calibro e poi ordina semplicemente ulteriori smussatori/piloti per altri calibri.
94.9CHF5CHF 94.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 749006008 RCBS 7MM 3-WAY CUTTER Parti Fabbricante: 90283076683902832 Il Cutter 3-Way RCBS è progettato per l'uso sui Trimmer per casi Trim Pro e riduce il compito di rifilatura/deburring. Il Cutter 3-Way non solo rifila i casi a lunghezze specifiche, ma una lama interna smussa il caso mentre una lama esterna lo deburra. Installa su tutti i Trimmer per casi Trim Pro. Ordina un Cutter 3-Way per calibro e poi ordina semplicemente ulteriori smussatori/piloti per altri calibri.
94.9CHF1CHF 94.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
The RCBS 3-Way Cutter is designed for use on Trim Pro Case Trimmers and reduces the trimming /deburring chore. The 3-Way Cutter not only trims cases to lengths but an inside blade chamfers the case while an outside blade deburrs it. Install on all Trim Pro Case Trimmers. Order one 3-Way Cutter by caliber and then simply order additional chamfer/pilots for other calibers.
Altro...
Il Cutter 3-Way RCBS è progettato per l'uso sui Trimmer per casi Trim Pro e riduce il compito di rifilatura/deburring. Il Cutter 3-Way non solo rifila i casi a lunghezze specifiche, ma una lama interna smussa il caso mentre una lama esterna lo deburra. Installa su tutti i Trimmer per casi Trim Pro. Ordina un Cutter 3-Way per calibro e poi ordina semplicemente ulteriori smussatori/piloti per altri calibri.
Altro...
Punteggi dei clienti per RCBS 22 CALIBER 3-WAY CUTTER
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4.4
Excellent Product(28.02.2017)
This product produces excellent trimming. Very easily installed and easy to clean.
Outstanding Idea!(25.03.2012)
I use this on the motorized Trim Pro and it significantly reduces the prep time spent on each case. This is a great idea and works great even if you only neck-size your cases.
Great time saver(26.03.2013)
This tool makes a tedious job almost enjoyable. It took about 5 minutes to set up using the supplied instructions, and does a great job of trimming, chamfering and deburring case necks all in one step. As an added bonus, because there is no "flash" around the necks after the cut, the cases just pop right off. I wish I had found this 35 years ago when I started reloading.
On top of that, RCBS service is awesome. I had an older model cutter that does not allow the cutting head to be removed. After over 30 years, it was so dull it just wouldn't cut. I e-mailed RCBS asking if I could purchase a replacement cutter. They sent me a new shaft and removable cutter - FREE! That kind of service keeps me coming back.
Not meant for electric Trim Pro(14.05.2018)
I have a Trim Pro 2 (powered version.) When contacted, RCBS says it is not meant for their power version. I find that with care and extra attention, it will work (cases tend to fly across the room when withdrawing the cutting head and the torque can spin the case even when "securely" locked in position.) They advise the head may wear out more quickly. As stated, with care, it seems to do a good job. I use for .223 and .30 cal. RCBS support is great, a real positive!
Excellent(06.02.2012)
This Could be one of the best time saving tools I have in brass prep. Works precisely as advertised and very easy to replace the standard cutting head and set up. Trim length is adjusted as normal. Inside deburring is accomplished by loosening the pilot and moving in and out to desired cut - then lock in place. Outside chamfer is done by loosening set screw and turning the knob to lower the blade onto the outside rim of the case. Took less than 4-5 minutes to figure out and set up for the first time and every case comes out perfect. Used with my drill on the trim pro shaft, I can easily complete about 8- 10 rounds per minute
Magic(09.02.2011)
Now if you ever want to save yourself many hours at the reloading bench then this is the most magnificant tool one could ever buy. Just screw it onto your existing RCBS Trimmer and adjust to suit your brass and just like magic...Its job done. No more pain involved in deburing by hand... The only downside I can think of is that I didnt get one earlier than I did...
3 way cutter(10.04.2016)
Bought this thinking I would save time on my brand new brass for 6mm br and it scratched the hell out of the inside of the neck on my dollar a piece Lapua brass. Also leaves too much chamfer for my liking, I'll stick with my torpedo chamfer/debur tool.
Would be fine for hunting ammo but not for Benchrest use.