Lets you use your entire hand to grip the gun for better recoil control and more consistent shot placement. Grip Extension does not increase magazine capacity or weight. Extended “shelf” for the little finger attaches in place of the factory magazine base. Makes shooting these little “handfuls” a lot more comfortable.
SPECS: Impact-resistant plastic, black.
Altro...
Aggiunge Controllo del Rinculo per una Maggiore Precisione
Ti consente di utilizzare tutta la mano per impugnare l'arma, migliorando il controllo del rinculo e garantendo una posizione di tiro più costante. L'estensione dell'impugnatura non aumenta la capacità o il peso del caricatore. Il "ripiano" esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende il tiro di questi piccoli "maneggi" molto più confortevole.
SPECIFICHE: Plastica resistente agli urti, nera.
Altro...
Punteggi dei clienti per PEARCE GRIP FITS SPRINGFIELD XDS, +0
Numero di punteggi: 15
Da brownells.com: 15
Punteggio medio: 4.5
A place for my pinky(18.06.2013)
These Pearce grip extensions for the Springfield XDS .45 work just as they are intended. There is now a place for my pinky finger to make solid contact with the pistol. They were simple to install on the magazines as Springfield made removing the base place easy. I'm hard pressed to come up with a negative. OK, they aren't free. Buy enough for all of your 5 round mags. You should not be disappointed.
Professional and expedient Company(04.01.2014)
The grip extensions fit perfectly, fast shipment and good communication regarding items. Makes the Springfield Armory XDS fit the hand quite well
Awesome product(09.04.2014)
I just installed the Pearce Grip on my wife's XDS. It was very simple to install and took less than a minute to install on two magazines. It was a lot cheaper than buying an extended magazine just to increase the grip length. It decreases follow up shot intervals and ensures total control which in turn increases safety.
I would put one on EVERY compact mag(11.08.2011)
Adds just enough length to completely change the feel and control of the weapon. I have used it for several months on my XDm-9 and will put one on every compact mag that I get for this gun.
Makes for a perfect fit(31.07.2012)
This is the goldilocks solution for my compact XDm. The extended mag is too long for concealed carry and the compact mag leaves my little finger with nothing to hold on to. I can now say what I've heard so many times about the XDm, it's like it was made for my hand.
Great Add On(16.06.2015)
Adds space for pinky, and helps manage recoil. More contact with the grip, and allows faster follow ups.
Necessary? No. But I love mine.
Caveat: When concealing, the grip prints more. But that's a duh.
Works as expected(21.07.2012)
I put these on my Service model XD45. The originals came off easily but these aren't the easiest. The capacity restriction seems pointless and I tried to install one with little success. It's difficult for it to catch the extension with the peg. As long as you don't need the capacity restrictors it's fine fit and function.
Could of been better.(22.07.2012)
The floor plate catch is a pain and doesn't actually catch until after you load the magazine. They look good and feel nice with a two handed grip.
Improvement over stock(04.12.2009)
Added to my CCW pistol. Improves two hand grip with compact mag. Doesn't contour to the pistols grip like the mag. extension sleeve on 13 rnd. mag. But overall still worth the addition.
I do not like the Pearce grip extension.(03.06.2011)
I use this grip extension on my XD45 Compact. I have a large hand, and this unit is too large. It actually makes the pistol less concealable than the standard frame.
PG-XD45 extension on XD45 Compact(12.01.2013)
I put these on my 10 round magazines that do not extend out of the grip and they are great. They provide a rest and leverage for that bottom finger. Very easy to switch out with OEM mag butt plate. They do not add extra rounds. Haven't shot it yet but the grip is so much better. I gave it a "4 Stars" because there are rough/sharp little edges on some corners and mold seams that I had to file down. I don't see where they are an advantage on a full length magazine unless you have a real big hand.
Exactly as advertised(13.01.2016)
I was looking for better grip / control when shooting my .45 3.8" XDm with the smaller magazine and purchased this grip extension.
Easy to install, fit my hand / grip perfectly. My shooting accuracy is improved.
The wife likes it as well
Excellent addition(16.03.2018)
Installed these on my nine round flush fit magizines. They performed exactly as advertised. I definitely got increased comfort and control. I iwould highly recommend these for all subcompact handgun owners.
Great Product!(22.06.2009)
I put these grip extentions on my XD9 Subcompact and they add a nice amount of control over the original. I would recomend these to anyone with larger hands.
Great Addition(25.05.2010)
I put these on my XD40 sub and couldn't be happier. It adds just enough length for better grip which leads to better recoil management and puts you back on target quicker for faster more accurate follow up shots. For me it also does not hinder concealment and is highly recommended.
N. prodotto: 092000025 PEARCE GRIP FITS SPRINGFIELD XDS, +0 Parti Fabbricante: PGXDS605849140124 Ti consente di utilizzare tutta la mano per impugnare l'arma, migliorando il controllo del rinculo e garantendo una posizione di tiro più costante. L'estensione dell'impugnatura non aumenta la capacità o il peso del caricatore. Il "ripiano" esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende il tiro di questi piccoli "maneggi" molto più confortevole.
14.9CHF20CHF 14.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Consente una presa migliore dell'arma, migliorando il controllo del rinculo.
L'estensione non aumenta la capacità o il peso del caricatore.
Rende il tiro con le pistole più piccole molto più confortevole.
Caratteristiche
Adatto per:
Springfield
Modello:
XD-Subcompact
Tipo:
Grip Extenders
Peso della spedizione: 0.091kgAltezza di spedizione: 26mmLarghezza di spedizione: 66mmLunghezza di spedizione: 88mm
UPC
: 605849140124
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 092000006 PEARCE GRIP FITS SPRINGFIELD XD, ADDS 0 Parti Fabbricante: PGXD605849140094 Ti consente di utilizzare tutta la mano per impugnare l'arma, migliorando il controllo del rinculo e garantendo una posizione di tiro più costante. L'estensione dell'impugnatura non aumenta la capacità o il peso del caricatore. Il "ripiano" esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende il tiro di questi piccoli "maneggi" molto più confortevole.
14.9CHF9CHF 14.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: SpringfieldModello: XD, XD Mod 2Tipo: Grip Extenders
N. prodotto: 092000010 PEARCE GRIP FITS SPRINGFIELD XD .45 ACP, ADDS 0 Parti Fabbricante: PGXD45605849140452 Ti consente di utilizzare tutta la mano per impugnare l'arma, migliorando il controllo del rinculo e garantendo una posizione di tiro più costante. L'estensione dell'impugnatura non aumenta la capacità o il peso del caricatore. Il "ripiano" esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende il tiro di questi piccoli "maneggi" molto più confortevole.
14.9CHF12CHF 14.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 092000017 PEARCE GRIP FITS SPRGFLD XD FULL/COMPACT .45ACP****, ADDS 1 Parti Fabbricante: PGXD45605849140469 Ti consente di utilizzare tutta la mano per impugnare l'arma, migliorando il controllo del rinculo e garantendo una posizione di tiro più costante. L'estensione dell'impugnatura non aumenta la capacità o il peso del caricatore. Il "ripiano" esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende il tiro di questi piccoli "maneggi" molto più confortevole.
14.9CHF7CHF 14.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 092000018 PEARCE GRIP FITS SPRGFLD XD FULL/CMPT 9MM/.40S&W/.357SIG/.45GAP, ADDS 2 Parti Fabbricante: PG-XD+605849140100 Ti consente di utilizzare tutta la mano per impugnare l'arma, migliorando il controllo del rinculo e garantendo una posizione di tiro più costante. L'estensione dell'impugnatura non aumenta la capacità o il peso del caricatore. Il "ripiano" esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende il tiro di questi piccoli "maneggi" molto più confortevole.
22.9CHF7CHF 22.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 092000021 PEARCE GRIP FITS SPRINGFIELD XDM 9MM/.40 S&W, ADDS 0 Parti Fabbricante: PGXDM605849140117 Ti consente di utilizzare tutta la mano per impugnare l'arma, migliorando il controllo del rinculo e garantendo una posizione di tiro più costante. L'estensione dell'impugnatura non aumenta la capacità o il peso del caricatore. Il "ripiano" esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende il tiro di questi piccoli "maneggi" molto più confortevole.
14.9CHF4CHF 14.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Lets you use your entire hand to grip the gun for better recoil control and more consistent shot placement. Grip Extension does not increase magazine capacity or weight. Extended “shelf” for the little finger attaches in place of the factory magazine base. Makes shooting these little “handfuls” a lot more comfortable.
SPECS: Impact-resistant plastic, black.
Altro...
Aggiunge Controllo del Rinculo per una Maggiore Precisione
Ti consente di utilizzare tutta la mano per impugnare l'arma, migliorando il controllo del rinculo e garantendo una posizione di tiro più costante. L'estensione dell'impugnatura non aumenta la capacità o il peso del caricatore. Il "ripiano" esteso per il mignolo si attacca al posto della base del caricatore di fabbrica. Rende il tiro di questi piccoli "maneggi" molto più confortevole.
SPECIFICHE: Plastica resistente agli urti, nera.
Altro...
Punteggi dei clienti per PEARCE GRIP FITS SPRINGFIELD XDS, +0
Numero di punteggi: 15
Da brownells.com: 15
Punteggio medio: 4.5
A place for my pinky(18.06.2013)
These Pearce grip extensions for the Springfield XDS .45 work just as they are intended. There is now a place for my pinky finger to make solid contact with the pistol. They were simple to install on the magazines as Springfield made removing the base place easy. I'm hard pressed to come up with a negative. OK, they aren't free. Buy enough for all of your 5 round mags. You should not be disappointed.
Professional and expedient Company(04.01.2014)
The grip extensions fit perfectly, fast shipment and good communication regarding items. Makes the Springfield Armory XDS fit the hand quite well
Awesome product(09.04.2014)
I just installed the Pearce Grip on my wife's XDS. It was very simple to install and took less than a minute to install on two magazines. It was a lot cheaper than buying an extended magazine just to increase the grip length. It decreases follow up shot intervals and ensures total control which in turn increases safety.
I would put one on EVERY compact mag(11.08.2011)
Adds just enough length to completely change the feel and control of the weapon. I have used it for several months on my XDm-9 and will put one on every compact mag that I get for this gun.
Makes for a perfect fit(31.07.2012)
This is the goldilocks solution for my compact XDm. The extended mag is too long for concealed carry and the compact mag leaves my little finger with nothing to hold on to. I can now say what I've heard so many times about the XDm, it's like it was made for my hand.
Great Add On(16.06.2015)
Adds space for pinky, and helps manage recoil. More contact with the grip, and allows faster follow ups.
Necessary? No. But I love mine.
Caveat: When concealing, the grip prints more. But that's a duh.
Works as expected(21.07.2012)
I put these on my Service model XD45. The originals came off easily but these aren't the easiest. The capacity restriction seems pointless and I tried to install one with little success. It's difficult for it to catch the extension with the peg. As long as you don't need the capacity restrictors it's fine fit and function.
Could of been better.(22.07.2012)
The floor plate catch is a pain and doesn't actually catch until after you load the magazine. They look good and feel nice with a two handed grip.
Improvement over stock(04.12.2009)
Added to my CCW pistol. Improves two hand grip with compact mag. Doesn't contour to the pistols grip like the mag. extension sleeve on 13 rnd. mag. But overall still worth the addition.
I do not like the Pearce grip extension.(03.06.2011)
I use this grip extension on my XD45 Compact. I have a large hand, and this unit is too large. It actually makes the pistol less concealable than the standard frame.
PG-XD45 extension on XD45 Compact(12.01.2013)
I put these on my 10 round magazines that do not extend out of the grip and they are great. They provide a rest and leverage for that bottom finger. Very easy to switch out with OEM mag butt plate. They do not add extra rounds. Haven't shot it yet but the grip is so much better. I gave it a "4 Stars" because there are rough/sharp little edges on some corners and mold seams that I had to file down. I don't see where they are an advantage on a full length magazine unless you have a real big hand.
Exactly as advertised(13.01.2016)
I was looking for better grip / control when shooting my .45 3.8" XDm with the smaller magazine and purchased this grip extension.
Easy to install, fit my hand / grip perfectly. My shooting accuracy is improved.
The wife likes it as well
Excellent addition(16.03.2018)
Installed these on my nine round flush fit magizines. They performed exactly as advertised. I definitely got increased comfort and control. I iwould highly recommend these for all subcompact handgun owners.
Great Product!(22.06.2009)
I put these grip extentions on my XD9 Subcompact and they add a nice amount of control over the original. I would recomend these to anyone with larger hands.
Great Addition(25.05.2010)
I put these on my XD40 sub and couldn't be happier. It adds just enough length for better grip which leads to better recoil management and puts you back on target quicker for faster more accurate follow up shots. For me it also does not hinder concealment and is highly recommended.