Super-Durable & Ultra-Dependable PMAG Refined & Battle-Hardened By Combat Experience
The next-generation PMAG AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons, such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others. Similar to the MOE® PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning. The PMAG GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. FEATURES 30 or 40-round reliability with no stoppages Easy Identification - Use the paint pen dot matrix to easily identify your different loads when it's crunch time Advanced follower- The anti-tilt, self-lubricating follower ensures a smooth feed and magazine reliability Slimline floorplate - Improved flared floorplate aids magazine handling and disassembly and is slim enough for use with many double and triple pouches Next-generation impact and crush-resistant polymer construction that includes constant-curve internal geometry for smooth feeding Modified dimensions allow for wider compatibility with non Colt-spec 'STANAG 4179' platforms Constant-curve internal geometry, over-travel insertion stop on the spine, and a long-life stainless steel spring ensure smooth feeding Made in the USA. SPECS Caliber: 5.56x45mm / .223 Remington Platform: AR15, M4, M16, SA-80 Capacity: 30 or 40 Rounds depending on magazine Weight: 5 oz. Length, max: 7.5 in. Compatibility: Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others
SPECS: Impact/crush-resistant molded hard polymer, Black or Coyote Tan. Compatible with AR-15/M4/M16, HK 416, MR556A1, M27 IAR, British SA-80, FN SCAR MK 16/16S, and other similar lowers. 5.56mm/.223 ammunition only.
Altro...
PMAG Super-Durevole & Ultra-Affidabile Raffinato & Tempestato dalla Esperienza di Combattimento
Il caricatore in polimero MAGPUL PMAG GEN M3 continua a rivoluzionare la tecnologia dei caricatori per le piattaforme AR-15 / M4. Il PMAG di terza generazione espande ulteriormente la resistenza, l'affidabilità e la versatilità del PMAG originale. Il MAGPUL PMAG GEN M3 è realizzato con una formula di polimero che offre una resistenza nettamente superiore alla compressione e a tutte le forme di impatto, con rinforzi extra nelle aree del mag catch e del feed lip. Molla in acciaio inossidabile USGI-spec a lunga durata Follower anti-inclinazione a quattro vie e geometria interna a curva costante per un'alimentazione affidabile Smontaggio senza attrezzi per una facile pulizia Copertura antipolvere rimovibile che aiuta a ridurre l'intrusione di detriti Piastra inferiore rimovibile è sia più resistente che più sottile Completamente compatibile con HK® 416 e MR556A1, M27 IAR, British SA-80 e FN® SCAR™ MK 16/16S. Il MAGPUL PMAG GEN M3 presenta una matrice a punti su ogni lato che fornisce un marcatura ID coerente che resiste all'usura da manipolazione. PMAG 30 è disponibile con lati solidi e semplici.
SPECS: Polimero rigido stampato resistente agli urti, Nero o Coyote Tan. Compatibile con AR-15/M4/M16, HK 416, MR556A1, M27 IAR, British SA-80, FN SCAR MK 16/16S e altri lower simili. Solo munizioni 5.56mm/.223.
Altro...
Punteggi dei clienti per MAGPUL AR-15 PMAG M3 MAG 223/5.56 30RD POLYMER COYOTE TAN 100PK
Numero di punteggi: 20
Da brownells.com: 20
Punteggio medio: 4.1
It's just like a Pmag but Tan!!!(30.08.2018)
I have yet to have a single problem with a pmag, Im sure they happen but hasn't happened to me yet. Looks great, glad the made some kind of tan/brown magazine again. Without compromising durability like Magpul claims other colorants can do. Just get some before they switch colors and you can no longer buy!!! Goes great with my FDE furni ture that I can't get to match anyway, so it just adds another shade to the mix.
excellent magazine(14.12.2012)
Perfect, doesnt get any better
Excellent quality(01.06.2013)
Picked this mag because of all the hoopla I'd read about it and it did not disappoint. A very well made product at a VERY reasonable price. Hard to beat. I like the 20 round as opposed to the 30 because it's easier to shoot in the prone position. I'd highly recommend this mag.
Great as always(15.06.2013)
ordered this magazine and got it in yesterday. haven't gotten a chance to use it yet, but i loaded it with some dummy rounds and it fed perfectly. fits the magazine well perfectly. and i really like the new texture pattern on the mag. the waffling is a little more pronounced than on the earlier model magazines. Magpul always comes through with great products at a fair price. would definitely recommend this to anyone who is interested.
PMAG GEN3(01.07.2013)
I like the way the M3's fit tighter in my magwell,better than the M2's. The only thing i don't like,you can't store the dustcover on the bottom of the mag,like you can with the M2's,Everything else is great.
Magazine Jambed!(16.07.2013)
Ordered one of these MAG557 for my Colt Competition CRX-16. When I put the magazine in my rifle it jambed inside the weapon. I Had to separate the upper and lower receivers to dislodge it from the inside of the magazine well.
Usually I buy the MAG211, never had any problem with them. Don't really see why this particular Magpul model magazine failed to work correctly.
Now I will have to go through the hassle of returning it and ordering a 211.
At present seems to meet my expectations(06.08.2013)
I ordered the magazines (2-20 round P Mags) last Friday and received them Monday. WOW! That was quick!! At present they seem to load just fine and will be tested on Aug. 18th at a local Carbine match. I was recently asked why I would purchase 2, as I have several "old school" 20 round alumininum magazines. I responded by stating I use them when shoot prone (primarily at distance). One can also load the mags to capacity and they seem to function just fine. I will give a bit more KUDOS to Magpul in general as all existing alumininum magazines I own (30 rd- not 20 rd) have been outfitted with Magpul components and have always served my needs. All of my training/local carbine competition was conducted with the "upgraded" magazines. Not one problam that I can recall. Great stuff. I would recommend it (MagPul accessories etc) to anyone/everyone.
Just as it should be(24.08.2013)
Bought other mags Pmags are still what I use.
Magpul gen m3 window and non window(24.01.2014)
These are the only mags I roll with after my mil issue metal mag faild me.Drop them,throw them,drive over them they still work.Only jams I had where from remanufactored ammo after running 4 clips thru at burst.I think these are the best that I have used.
Tougher than nails(23.05.2014)
Set an empty pmag on the hood of my truck while packing my gear (stupid, I know). Seen it slide off at 40MPH. Then seen a suburban run over it before I could get to it. Other than some scratches, pmag is fine. Tough magazine!
Issues(15.07.2014)
I bought several of the Gen3's in twenty and thirty round capacity. I loaded factory Federal rounds in the thirty round magazine last night, and the magazine would not lock in the lower. I tried reducing the rounds by one, and re-inserting the magazine, same problem. I got down to twenty rounds in the thirty round magazine and had the same issues. I tried the twenty round magazine today, with the same negative results.
Today I tried the magazines in a different manufacturer's lower, same issues.
I have e-mailed Magpul, and will post their response.
Great Mags(20.03.2015)
At first I was skeptical to move to the polymer mags after always using aluminum or steel mags, but I'm glad that I did. They are heavier than the standard aluminum mags, but superior in durability, and they are lighter than the steel mags. This is a win win in my book. I know some people have complained about these mags not working in their AR's, and all I can say about that is if you have any uncertainty about these mags fitting call MagPul or Brownells to see if they will work. Some ARs are funny when it comes to mags (the reason you should only buy well known/recognized names).
GREAT PRODUCT!!!(28.07.2015)
great product, nothing to complain about! you really cant go wrong with these mags! these mags are tough and reliable
Awesome!(26.08.2015)
I bought the 10 pack of the gen 3's for a great price and I love them. I got a gen 2 with the gun I bought and the gen 3 seems to fit better especially when fully loaded.
Best AR Magazine Available(27.08.2015)
A top quality magazine you can bet your life on. Designed and Made in the U.S.A. by MagPull, a company started by a retired Marine who knows what works and who knows that dependability of the magazine is vital to the lives of those who use them. As a Gunsmith, this is the only AR magazine that I recommend to my customers.
Excellent magazines - "Sand" is beige(16.11.2015)
The Magpul Gen. 3 AR-15 magazines are really solidly built AR-15 magazines.
The only thing I would not buy again are the "sand" colored magazines. By the photos on this website on my color calibrated monitors, I expected the magazines to be tan like the FN-SCAR, however the magazine is more of a beige white color. Just a heads up on that in case you were trying to color match your rifle.
Almost Perfect(16.03.2016)
The Gen M3 is a direct answer to the (already minor) concerns about the Gen M2, creating a mag that trades the elder's weaknesses for a couple of its own. First off, some subtle revision of the geometry almost entirely prevents the phenomenon of the top cartridge popping out from an impact around the base, so there isn't likely to be any lost or half-ejected rounds in the event of a drop. It then streamlines the base plate to reduce its external lip, leaving more space between mags in a carrier to reduce "knocking" during movement, but sacrificing some of the M2's ease of removal, something the added bit of waffle texture at the bottom only partly makes up for. Additional textural tweaks deepen the pattern around the main body and add some ribs to the front for added traction. Finally, the bracing ribs at the top have been beefed up and a small ledge has been added to prevent over-insertion when the bolt is open - both serve to stabilize its position in the mag well, but also contribute to the increased difficulty of adding and removing the mag to and from a carrier; either way, it's still far better than a smooth GI mag from a gripping standpoint. The M3 is a bit pricier than its predecessor, but still quite affordable. And of course, it retains the durability, light weight, and great function that have made PMAGs the go-to for so many shooters. Thumbs-up.
It is what it is(16.12.2017)
Had to shave off the lip on the backside that contact the magwell. other than that it operated as it should
Does not Click into Palmetto Arms Lower(25.08.2018)
It does not work, will not click into lower even empty with no rounds. Only a couple times I was able to continously hit it and it would maybe lock in, but otherwise it caused nothing but frustration for me. I heard the M2 Worked fine with this gun I have, but the M3 does not work.
Does not Click into Palmetto Arms Lower(25.08.2018)
It does not work, will not click into lower even empty with no rounds. Only a couple times I was able to continously hit it and it would maybe lock in, but otherwise it caused nothing but frustration for me. I heard the M2 Worked fine with this gun I have, but the M3 does not work.
N. prodotto: 430108049 MAGPUL AR-15 PMAG M3 MAG 223/5.56 30RD POLYMER COYOTE TAN 100PK Parti Fabbricante: NONE Il caricatore in polimero MAGPUL PMAG GEN M3 continua a rivoluzionare la tecnologia dei caricatori per le piattaforme AR-15 / M4. Il PMAG di terza generazione espande ulteriormente la resistenza, l'affidabilità e la versatilità del PMAG originale. Il MAGPUL PMAG GEN M3 è realizzato con una formula di polimero che offre una resistenza nettamente superiore alla compressione e a tutte le forme di impatto, con rinforzi extra nelle aree del mag catch e del feed lip. Molla in acciaio inossidabile USGI-spec a lunga durata Follower anti-inclinazione a quattro vie e geometria interna a curva costante per un'alimentazione affidabile Smontaggio senza attrezzi per una facile pulizia Copertura antipolvere rimovibile che aiuta a ridurre l'intrusione di detriti Piastra inferiore rimovibile è sia più resistente che più sottile Completamente compatibile con HK® 416 e MR556A1, M27 IAR, British SA-80 e FN® SCAR™ MK 16/16S. Il MAGPUL PMAG GEN M3 presenta una matrice a punti su ogni lato che fornisce un marcatura ID coerente che resiste all'usura da manipolazione. PMAG 30 è disponibile con lati solidi e semplici.
2099.9CHF3CHF 2'099.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Permesso d'acquisto di caricatori ad alta capacità(Copia dell'autorizzazione eccezionale o conferma di possesso d'arma Cantonale)
Top takeaways
Il MAGPUL PMAG GEN M3 offre una maggiore resistenza e affidabilità rispetto ai modelli precedenti.
Realizzato in polimero con una molla in acciaio inossidabile USGI-spec per una lunga durata e alimentazione affidabile.
Compatibile con diverse piattaforme come AR-15, HK 416 e FN SCAR, con un design che facilita la pulizia e riduce l'intrusione di detriti.
Caratteristiche
Adatto per:
AR-15
Capacità:
30-colpi
Cartuccia:
223 Remington,5.56 mm NAa
Finitura:
Coyote Tan
Materiale:
Polymer
Quantità: 100 Peso della spedizione: 17.237kg
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.d
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 100011220 MAGPUL PMAG GEN M3 5.56/.223 30RD FOR AR-15 BLK 1/PACK Parti Fabbricante: MAG557-BLK873750006178 Il caricatore in polimero MAGPUL PMAG GEN M3 continua a rivoluzionare la tecnologia dei caricatori per le piattaforme AR-15 / M4. Il PMAG di terza generazione espande ulteriormente la resistenza, l'affidabilità e la versatilità del PMAG originale. Il MAGPUL PMAG GEN M3 è realizzato con una formula di polimero che offre una resistenza nettamente superiore alla compressione e a tutte le forme di impatto, con rinforzi extra nelle aree del mag catch e del feed lip. Molla in acciaio inossidabile USGI-spec a lunga durata Follower anti-inclinazione a quattro vie e geometria interna a curva costante per un'alimentazione affidabile Smontaggio senza attrezzi per una facile pulizia Copertura antipolvere rimovibile che aiuta a ridurre l'intrusione di detriti Piastra inferiore rimovibile è sia più resistente che più sottile Completamente compatibile con HK® 416 e MR556A1, M27 IAR, British SA-80 e FN® SCAR™ MK 16/16S. Il MAGPUL PMAG GEN M3 presenta una matrice a punti su ogni lato che fornisce un marcatura ID coerente che resiste all'usura da manipolazione. PMAG 30 è disponibile con lati solidi e semplici.
29.9CHF1'234CHF 29.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: AR-15Capacità: 30-colpiCartuccia: 223 Remington, 5.56 mm NAaFinitura: NeroMateriale: PolymerTipo di azione: Semi-AuaQuantità: 1
N. prodotto: 100012633 MAGPUL PMAG GEN M3 5.56/.223 40RD FOR AR-15 BLK 1/PACK Parti Fabbricante: MAG233-BLK873750009698 Il polimero rivista che ha rivoluzionato la tecnologia rivista per la piattaforma AR-15/M16/M4 solo è diventato ancora migliore. La terza generazione PMAG ulteriormente espande la resistenza, affidabilità e versatilità del PMAG originale. Insieme a tutte le varianti di AR-15/M16/M4, M3 GEN è pienamente compatibile con l'HK 416 ® e MR556A1, M27 IAR, British SA-80 e anche il FN SCAR ® ™ MK 16/16S. È stampato da una formula di polimero che batte nettamente maggiore resistenza allo schiacciamento e tutte le forme di impatto, con rinforzo supplementare in mag cattura e labbro campi di avanzamento. Un nuovo design quattro vie antiribaltamento seguace assicura l'alimentazione ancora più agevole, anche quando contaminati da polvere o sabbia. Pop-off-copertura antipolvere, incluso, aiuta a minimizzare intrusione di detriti e prevenire danni durante lo stoccaggio. Il fondello smontabile è sia più forte e più sottile per il trasporto più facile-by-side in stretto porta caricatori. Una matrice di punti di penna su ogni lato consente coerente ID marcatura che resiste all'usura di movimentazione. PMAG 40 ha lati solidi. La capacità aggiunta significa meno ricariche, risparmiando secondi preziosi per i tiratori di concorrenza.
36.9CHF55CHF 36.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: AR-15Capacità: 40-colpiCartuccia: 223 Remington, 5.56 mm NAaFinitura: NeroMateriale: PolymerTipo di azione: Semi-AuaQuantità: 1
N. prodotto: 100024603 MAGPUL PMAG GEN M3 5.56/.223 30RD FOR AR-15 COYOTE 1/PACK Parti Fabbricante: MAG557-MCT840815117162 The MAGPUL PMAG GEN M3 polimero rivista continua a rivoluzionare la tecnologia rivista per l'AR-15 / M4 piattaforme. La terza generazione PMAG ulteriormente espande la resistenza, affidabilità e versatilità del PMAG originale. La M3 MAGPUL PMAG GEN è modellato da una formula di polimero che batte nettamente maggiore resistenza allo schiacciamento e tutte le forme di impatto, con rinforzo supplementare in catch mag e labbro campi di avanzamento. In acciaio inox di lunga durata USGI-spec primavera seguace di quattro vie anti-ribaltamento e geometria interna costante-curva per affidabile alimentazione Tool-less smontaggio per pulizia facile Pop-off coperchio antipolvere aiuta a ridurre al minimo i detriti delle intrusioni fondello smontabile è entrambi più forte e più sottile pienamente compatibile con l'HK 416® e MR556A1, M27 IAR, British SA-80 e FN SCAR®™ MK 16/16S. MAGPUL PMAG GEN M3 Caratteristiche penna a matrice di punti su ogni lato fornire ID coerente di marcatura che resiste alla manipolazione di usura. PMAG 30 è disponibile con i lati di piano, tinta.
28.9CHF385CHF 28.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: AR-15Capacità: 30-colpiCartuccia: 5.56 mm NAaFinitura: TanMateriale: PolymerQuantità: 1
N. prodotto: 430108048 MAGPUL AR-15 PMAG M3 MAG 223/5.56 30RD POLYMER COYOTE TAN 10-PK Parti Fabbricante: NONE Il caricatore in polimero MAGPUL PMAG GEN M3 continua a rivoluzionare la tecnologia dei caricatori per le piattaforme AR-15 / M4. Il PMAG di terza generazione espande ulteriormente la resistenza, l'affidabilità e la versatilità del PMAG originale. Il MAGPUL PMAG GEN M3 è realizzato con una formula di polimero che offre una resistenza nettamente superiore alla compressione e a tutte le forme di impatto, con rinforzi extra nelle aree del mag catch e del feed lip. Molla in acciaio inossidabile USGI-spec a lunga durata Follower anti-inclinazione a quattro vie e geometria interna a curva costante per un'alimentazione affidabile Smontaggio senza attrezzi per una facile pulizia Copertura antipolvere rimovibile che aiuta a ridurre l'intrusione di detriti Piastra inferiore rimovibile è sia più resistente che più sottile Completamente compatibile con HK® 416 e MR556A1, M27 IAR, British SA-80 e FN® SCAR™ MK 16/16S. Il MAGPUL PMAG GEN M3 presenta una matrice a punti su ogni lato che fornisce un marcatura ID coerente che resiste all'usura da manipolazione. PMAG 30 è disponibile con lati solidi e semplici.
234.9CHF38CHF 234.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 430108802 MAGPUL AR-15 PMAG GEN M3 MAGAZINE 223/5.56 30RD POLYMER BLACK 100PK Parti Fabbricante: NONE Il caricatore in polimero MAGPUL PMAG GEN M3 continua a rivoluzionare la tecnologia dei caricatori per le piattaforme AR-15 / M4. Il PMAG di terza generazione espande ulteriormente la resistenza, l'affidabilità e la versatilità del PMAG originale. Il MAGPUL PMAG GEN M3 è realizzato con una formula di polimero che offre una resistenza nettamente superiore alla compressione e a tutte le forme di impatto, con rinforzi extra nelle aree del mag catch e del feed lip. Molla in acciaio inossidabile USGI-spec a lunga durata Follower anti-inclinazione a quattro vie e geometria interna a curva costante per un'alimentazione affidabile Smontaggio senza attrezzi per una facile pulizia Copertura antipolvere rimovibile che aiuta a ridurre l'intrusione di detriti Piastra inferiore rimovibile è sia più resistente che più sottile Completamente compatibile con HK® 416 e MR556A1, M27 IAR, British SA-80 e FN® SCAR™ MK 16/16S. Il MAGPUL PMAG GEN M3 presenta una matrice a punti su ogni lato che fornisce un marcatura ID coerente che resiste all'usura da manipolazione. PMAG 30 è disponibile con lati solidi e semplici.
1999.9CHF12CHF 1'999.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Super-Durable & Ultra-Dependable PMAG Refined & Battle-Hardened By Combat Experience
The next-generation PMAG AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons, such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others. Similar to the MOE® PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning. The PMAG GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. FEATURES 30 or 40-round reliability with no stoppages Easy Identification - Use the paint pen dot matrix to easily identify your different loads when it's crunch time Advanced follower- The anti-tilt, self-lubricating follower ensures a smooth feed and magazine reliability Slimline floorplate - Improved flared floorplate aids magazine handling and disassembly and is slim enough for use with many double and triple pouches Next-generation impact and crush-resistant polymer construction that includes constant-curve internal geometry for smooth feeding Modified dimensions allow for wider compatibility with non Colt-spec 'STANAG 4179' platforms Constant-curve internal geometry, over-travel insertion stop on the spine, and a long-life stainless steel spring ensure smooth feeding Made in the USA. SPECS Caliber: 5.56x45mm / .223 Remington Platform: AR15, M4, M16, SA-80 Capacity: 30 or 40 Rounds depending on magazine Weight: 5 oz. Length, max: 7.5 in. Compatibility: Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others
SPECS: Impact/crush-resistant molded hard polymer, Black or Coyote Tan. Compatible with AR-15/M4/M16, HK 416, MR556A1, M27 IAR, British SA-80, FN SCAR MK 16/16S, and other similar lowers. 5.56mm/.223 ammunition only.
Altro...
PMAG Super-Durevole & Ultra-Affidabile Raffinato & Tempestato dalla Esperienza di Combattimento
Il caricatore in polimero MAGPUL PMAG GEN M3 continua a rivoluzionare la tecnologia dei caricatori per le piattaforme AR-15 / M4. Il PMAG di terza generazione espande ulteriormente la resistenza, l'affidabilità e la versatilità del PMAG originale. Il MAGPUL PMAG GEN M3 è realizzato con una formula di polimero che offre una resistenza nettamente superiore alla compressione e a tutte le forme di impatto, con rinforzi extra nelle aree del mag catch e del feed lip. Molla in acciaio inossidabile USGI-spec a lunga durata Follower anti-inclinazione a quattro vie e geometria interna a curva costante per un'alimentazione affidabile Smontaggio senza attrezzi per una facile pulizia Copertura antipolvere rimovibile che aiuta a ridurre l'intrusione di detriti Piastra inferiore rimovibile è sia più resistente che più sottile Completamente compatibile con HK® 416 e MR556A1, M27 IAR, British SA-80 e FN® SCAR™ MK 16/16S. Il MAGPUL PMAG GEN M3 presenta una matrice a punti su ogni lato che fornisce un marcatura ID coerente che resiste all'usura da manipolazione. PMAG 30 è disponibile con lati solidi e semplici.
SPECS: Polimero rigido stampato resistente agli urti, Nero o Coyote Tan. Compatibile con AR-15/M4/M16, HK 416, MR556A1, M27 IAR, British SA-80, FN SCAR MK 16/16S e altri lower simili. Solo munizioni 5.56mm/.223.
Altro...
Punteggi dei clienti per MAGPUL AR-15 PMAG M3 MAG 223/5.56 30RD POLYMER COYOTE TAN 100PK
Numero di punteggi: 20
Da brownells.com: 20
Punteggio medio: 4.1
It's just like a Pmag but Tan!!!(30.08.2018)
I have yet to have a single problem with a pmag, Im sure they happen but hasn't happened to me yet. Looks great, glad the made some kind of tan/brown magazine again. Without compromising durability like Magpul claims other colorants can do. Just get some before they switch colors and you can no longer buy!!! Goes great with my FDE furni ture that I can't get to match anyway, so it just adds another shade to the mix.
excellent magazine(14.12.2012)
Perfect, doesnt get any better
Excellent quality(01.06.2013)
Picked this mag because of all the hoopla I'd read about it and it did not disappoint. A very well made product at a VERY reasonable price. Hard to beat. I like the 20 round as opposed to the 30 because it's easier to shoot in the prone position. I'd highly recommend this mag.
Great as always(15.06.2013)
ordered this magazine and got it in yesterday. haven't gotten a chance to use it yet, but i loaded it with some dummy rounds and it fed perfectly. fits the magazine well perfectly. and i really like the new texture pattern on the mag. the waffling is a little more pronounced than on the earlier model magazines. Magpul always comes through with great products at a fair price. would definitely recommend this to anyone who is interested.
PMAG GEN3(01.07.2013)
I like the way the M3's fit tighter in my magwell,better than the M2's. The only thing i don't like,you can't store the dustcover on the bottom of the mag,like you can with the M2's,Everything else is great.
Magazine Jambed!(16.07.2013)
Ordered one of these MAG557 for my Colt Competition CRX-16. When I put the magazine in my rifle it jambed inside the weapon. I Had to separate the upper and lower receivers to dislodge it from the inside of the magazine well.
Usually I buy the MAG211, never had any problem with them. Don't really see why this particular Magpul model magazine failed to work correctly.
Now I will have to go through the hassle of returning it and ordering a 211.
At present seems to meet my expectations(06.08.2013)
I ordered the magazines (2-20 round P Mags) last Friday and received them Monday. WOW! That was quick!! At present they seem to load just fine and will be tested on Aug. 18th at a local Carbine match. I was recently asked why I would purchase 2, as I have several "old school" 20 round alumininum magazines. I responded by stating I use them when shoot prone (primarily at distance). One can also load the mags to capacity and they seem to function just fine. I will give a bit more KUDOS to Magpul in general as all existing alumininum magazines I own (30 rd- not 20 rd) have been outfitted with Magpul components and have always served my needs. All of my training/local carbine competition was conducted with the "upgraded" magazines. Not one problam that I can recall. Great stuff. I would recommend it (MagPul accessories etc) to anyone/everyone.
Just as it should be(24.08.2013)
Bought other mags Pmags are still what I use.
Magpul gen m3 window and non window(24.01.2014)
These are the only mags I roll with after my mil issue metal mag faild me.Drop them,throw them,drive over them they still work.Only jams I had where from remanufactored ammo after running 4 clips thru at burst.I think these are the best that I have used.
Tougher than nails(23.05.2014)
Set an empty pmag on the hood of my truck while packing my gear (stupid, I know). Seen it slide off at 40MPH. Then seen a suburban run over it before I could get to it. Other than some scratches, pmag is fine. Tough magazine!
Issues(15.07.2014)
I bought several of the Gen3's in twenty and thirty round capacity. I loaded factory Federal rounds in the thirty round magazine last night, and the magazine would not lock in the lower. I tried reducing the rounds by one, and re-inserting the magazine, same problem. I got down to twenty rounds in the thirty round magazine and had the same issues. I tried the twenty round magazine today, with the same negative results.
Today I tried the magazines in a different manufacturer's lower, same issues.
I have e-mailed Magpul, and will post their response.
Great Mags(20.03.2015)
At first I was skeptical to move to the polymer mags after always using aluminum or steel mags, but I'm glad that I did. They are heavier than the standard aluminum mags, but superior in durability, and they are lighter than the steel mags. This is a win win in my book. I know some people have complained about these mags not working in their AR's, and all I can say about that is if you have any uncertainty about these mags fitting call MagPul or Brownells to see if they will work. Some ARs are funny when it comes to mags (the reason you should only buy well known/recognized names).
GREAT PRODUCT!!!(28.07.2015)
great product, nothing to complain about! you really cant go wrong with these mags! these mags are tough and reliable
Awesome!(26.08.2015)
I bought the 10 pack of the gen 3's for a great price and I love them. I got a gen 2 with the gun I bought and the gen 3 seems to fit better especially when fully loaded.
Best AR Magazine Available(27.08.2015)
A top quality magazine you can bet your life on. Designed and Made in the U.S.A. by MagPull, a company started by a retired Marine who knows what works and who knows that dependability of the magazine is vital to the lives of those who use them. As a Gunsmith, this is the only AR magazine that I recommend to my customers.
Excellent magazines - "Sand" is beige(16.11.2015)
The Magpul Gen. 3 AR-15 magazines are really solidly built AR-15 magazines.
The only thing I would not buy again are the "sand" colored magazines. By the photos on this website on my color calibrated monitors, I expected the magazines to be tan like the FN-SCAR, however the magazine is more of a beige white color. Just a heads up on that in case you were trying to color match your rifle.
Almost Perfect(16.03.2016)
The Gen M3 is a direct answer to the (already minor) concerns about the Gen M2, creating a mag that trades the elder's weaknesses for a couple of its own. First off, some subtle revision of the geometry almost entirely prevents the phenomenon of the top cartridge popping out from an impact around the base, so there isn't likely to be any lost or half-ejected rounds in the event of a drop. It then streamlines the base plate to reduce its external lip, leaving more space between mags in a carrier to reduce "knocking" during movement, but sacrificing some of the M2's ease of removal, something the added bit of waffle texture at the bottom only partly makes up for. Additional textural tweaks deepen the pattern around the main body and add some ribs to the front for added traction. Finally, the bracing ribs at the top have been beefed up and a small ledge has been added to prevent over-insertion when the bolt is open - both serve to stabilize its position in the mag well, but also contribute to the increased difficulty of adding and removing the mag to and from a carrier; either way, it's still far better than a smooth GI mag from a gripping standpoint. The M3 is a bit pricier than its predecessor, but still quite affordable. And of course, it retains the durability, light weight, and great function that have made PMAGs the go-to for so many shooters. Thumbs-up.
It is what it is(16.12.2017)
Had to shave off the lip on the backside that contact the magwell. other than that it operated as it should
Does not Click into Palmetto Arms Lower(25.08.2018)
It does not work, will not click into lower even empty with no rounds. Only a couple times I was able to continously hit it and it would maybe lock in, but otherwise it caused nothing but frustration for me. I heard the M2 Worked fine with this gun I have, but the M3 does not work.
Does not Click into Palmetto Arms Lower(25.08.2018)
It does not work, will not click into lower even empty with no rounds. Only a couple times I was able to continously hit it and it would maybe lock in, but otherwise it caused nothing but frustration for me. I heard the M2 Worked fine with this gun I have, but the M3 does not work.