Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

812872020594 452000157
Reduced-weight bolt/carrier assembly helps tame felt recoil on a JP or DPMS or Remington AR-style .308 rifle (LR-308 pattern only). Carrier features the same type of weight-reducing cuts found on the original JPBC-3 AR-15 bolt carrier to give the same benefits your .308. Wide carrier rails have extra bearing surface to improve bolt alignment and reduce wear. Carrier key is already installed and staked. Available with QPQ or polished stainless finish. See SPECS for the Compatibility Notice.

SPECS: JP Low Mass Operating System Bolt Carrier- Large-Frame (.308). Stainless Steel. Polished Finish. Requires DPMS-pattern bolt, firing pin and cam pin. Weight: 10.82 oz. with key installed.

JP Low Mass Operating System Bolt Carrier- Large-Frame (.308). Stainless Steel. QPQ Black Finish. Requires DPMS-pattern bolt, firing pin and cam pin. Weight: 10.82 oz. with key installed. Finish: QPQ Coating.

Compatibility-

This notice pertains to any rifle based on the large-format AR-10-type or LR-308 platform typically chambered in .308 Winchester, 7.62x51 NATO or other cartridges requiring the longer magazine format.

Be aware that these receiver platforms are not standardized like the AR-15/M16 platform for which most parts are cross-compatible. Before ordering accessories and parts for your large-format rifle, make sure the parts are compatible with your particular platform. This bolt carrier is compatible only with the DPMS family of AR-10 products.

With the Armalite/Rock River family of large-frame receivers, this carrier can only be used as a complete bolt carrier assembly group with a DPMS-pattern bolt such as our .308 JP EnhancedBolt. Interchanging individual components will result in an unsafe configuration. Do Not under any circumstances mix and match components between the platforms.

 

429.9 509.9 2 CHF
N. prodotto: 452000157
J P ENTERPRISES JP .308 LOW MASS SPECIAL POLISH STAINLESS CARRIER WITH KEY
Parti Fabbricante: JPBC4SP 812872020594 L'assemblaggio bolt/carrier a peso ridotto aiuta a controllare il rinculo avvertito su un fucile AR-style .308 JP, DPMS o Remington (solo modello LR-308). Il carrier presenta gli stessi tagli per la riduzione del peso trovati sul bolt carrier originale JPBC-3 AR-15 per offrire gli stessi vantaggi al tuo .308. Le guide del carrier larghe hanno una superficie di supporto extra per migliorare l'allineamento del bolt e ridurre l'usura. La chiave del carrier è già installata e bloccata. Disponibile con finitura QPQ o in acciaio inossidabile lucido. Vedi SPECS per l'Avviso di Compatibilità.
509.9 CHF 4 CHF 509.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR .308 Cartuccia: 308 Winchester Finitura: Acciaio inox

Restrizioni

  • Permesso Acquisto Armi Richiesto

Top takeaways

  1. Il portaotturatore a basso peso migliora il controllo del rinculo su fucili AR in .308.
  2. Compatibile solo con la famiglia di prodotti AR-10 DPMS e richiede bolt, percussore e pin in stile DPMS.
  3. Disponibile in finitura QPQ o acciaio inossidabile lucido, con peso di 10,82 oz. con chiave installata.

Caratteristiche

Adatto per: AR .308 Cartuccia: 308 Winchester Finitura: Acciaio inox Peso della spedizione: 0.363kg Altezza di spedizione: 58mm Larghezza di spedizione: 58mm Lunghezza di spedizione: 249mm UPC : 812872020594

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c



N. prodotto: 452000172
J P ENTERPRISES JP .308 LOW MASS BOLT CARRIER WITH QPQ
Parti Fabbricante: JPBC4 812872020587 L'assemblaggio bolt/carrier a peso ridotto aiuta a controllare il rinculo avvertito su un fucile AR-style .308 JP, DPMS o Remington (solo modello LR-308). Il carrier presenta gli stessi tagli per la riduzione del peso trovati sul bolt carrier originale JPBC-3 AR-15 per offrire gli stessi vantaggi al tuo .308. Le guide del carrier larghe hanno una superficie di supporto extra per migliorare l'allineamento del bolt e ridurre l'usura. La chiave del carrier è già installata e bloccata. Disponibile con finitura QPQ o in acciaio inossidabile lucido. Vedi SPECS per l'Avviso di Compatibilità.
429.9 CHF 0 CHF 429.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR .308 Cartuccia: 308 Winchester Finitura: CPQ Coating

Migliora il tuo fucile AR-style con il bolt carrier .308 a basso peso di J P ENTERPRISES. 🔧 Finitura lucida in acciaio inox per prestazioni ottimali.

Reduced-weight bolt/carrier assembly helps tame felt recoil on a JP or DPMS or Remington AR-style .308 rifle (LR-308 pattern only). Carrier features the same type of weight-reducing cuts found on the original JPBC-3 AR-15 bolt carrier to give the same benefits your .308. Wide carrier rails have extra bearing surface to improve bolt alignment and reduce wear. Carrier key is already installed and staked. Available with QPQ or polished stainless finish. See SPECS for the Compatibility Notice.

SPECS: JP Low Mass Operating System Bolt Carrier- Large-Frame (.308). Stainless Steel. Polished Finish. Requires DPMS-pattern bolt, firing pin and cam pin. Weight: 10.82 oz. with key installed.

JP Low Mass Operating System Bolt Carrier- Large-Frame (.308). Stainless Steel. QPQ Black Finish. Requires DPMS-pattern bolt, firing pin and cam pin. Weight: 10.82 oz. with key installed. Finish: QPQ Coating.

Compatibility-

This notice pertains to any rifle based on the large-format AR-10-type or LR-308 platform typically chambered in .308 Winchester, 7.62x51 NATO or other cartridges requiring the longer magazine format.

Be aware that these receiver platforms are not standardized like the AR-15/M16 platform for which most parts are cross-compatible. Before ordering accessories and parts for your large-format rifle, make sure the parts are compatible with your particular platform. This bolt carrier is compatible only with the DPMS family of AR-10 products.

With the Armalite/Rock River family of large-frame receivers, this carrier can only be used as a complete bolt carrier assembly group with a DPMS-pattern bolt such as our .308 JP EnhancedBolt. Interchanging individual components will result in an unsafe configuration. Do Not under any circumstances mix and match components between the platforms.

 

4.5
In magazzino
CHF 29.90
5
Riordinato
CHF 229.90
2.3
In magazzino
CHF 48.90 CHF 48.90 - CHF 69.90
4.1
In magazzino
CHF 119.90
0
In magazzino
CHF 364.90
Torna all'inizio