Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
Altro...
I barili Alpha Wolf stabiliscono il benchmark per un'accuratezza assoluta e un'affidabilità in combattimento. È il culmine di ciò che ogni altro produttore di barili cerca di essere. Le tolleranze esatte consentono un'installazione a caduta. Progettati per munizioni in piombo, placcate o rivestite. Trattati termicamente a RC 40-42 e poi rivestiti con Salt Bath Nitride. I modelli filettati vengono forniti con il relativo protettore per filettatura.
Altro...
Punteggi dei clienti per LONE WOLF DIST. M22 & M31 ALPHAWOLF BARREL M/31 .357SIG THREADED 1/2X28
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3.5
Not Good!(23.05.2016)
Barrel installs easy and looks great! Out to the range and to my surprise about every 2 to 3 rounds was a misfire, would not go into battery, and ejection was a big issue. I was really disappointed.
Flawless(11.02.2017)
Wanted a threaded barrel for future use and at this price point for a USA made barrel, it is a great item.
I purchased it and didn't get to use it until I took my enhanced CCW class today and out 100 rounds though it in a very short time. I had 0 feeding or ejecting issues but I did have 1 round not fire. Though this was not due to the barrel though.
The thread protector does like to twist off a little after 30 or so rounds (maybe 1/10 of a turn) but nothing out of the ordinary.
Great addition to my G19(19.02.2017)
I wanted to wait until I had used it a bit to review. I have close to 1000 rounds through this barrel now and not a single FTL, FTF, or FFE. It has worked flawlessly. The thread protector does seem to come loose about 1/2 turn every time I take it to the range, but no more than that no matter how many rounds I fire. Now just waiting for the HPA to pass.
It's black, threaded, and shoots lead(20.01.2017)
I bought this for my Glock26 Gen4. Drops in with no issues. Has cycling hick-up from time to time only when cambering a fresh magazine, not while shooting. Put 50 115Gr. FMJ's through it before it started grouping well. 2" groups at 9yds. Handled the 115Grs. & 124 +P NATO's just fine. Haven't shot any lead cast through it yet. Performs as well at storm lake barrels that I've owned.
Only issues I could think of is the coating isn't all that tough but many "match grade" barrels have no coating at all. After initial shooting the barrel was marred near the rear top of the chamber and the lockup area. Like any thread protector it needs to be tightened up from time to time as it becomes loose from shooting and/or carrying. It seemed to hit 1.5" higher than the factory barrel at 9yds.
Does not fit in the Glock 19 9mm Gen 4 stock forget about it. "Thanks" "Experts" for your recommendation NOT!
3 guns in one(07.07.2018)
Sixth LW Glock replacement barrel I have purchased and first review. Fit on 30+ year old Gen 2 M22 is as close to perfect as it gets. I shoot Powder Coat Lee 356-125-2r sized @.358 and Accurate Mold 125D no lube groove also at .358. Barrel Slugged at .3565. Accuracy at first was disappointing, but after 5-600 rounds the barrel was capable of sub 1 1/2 inch groups at 11 yds and 2 inch inch groups at 25 yds. Consistently hit 9 in pie plates at 100 yards. Also handled 125 GDHP (for 357Sig) and S.147gr TMJ's well with PP and A#9 @1250-1300fps.
Not a "deal" as advertised but exceptionally pleased with purchase. Well worth it...
Not reliable (05.05.2016)
When actually shooting, this barrel shot really well, but I say "when shooting" because over the course of about 250 rounds (3 different types of ammo, all brass jacketed), I got 2 failures to eject and 6 failures to feed. Never had these issues before and, while still at the range, switched back to my OEM barrel and didn't have any more.
Great barrel!(06.09.2017)
I've got well over 3,000+ rounds through this barrel with only one issue and that was I couldn't do 15+1 using magpul pmags. No issues on stock mags though. The coating and accuracy are excellent. Definitely a step up over the factory barrel. It is a match grade barrel so there are tighter tolerances so remember to use quality ammunition.
N. prodotto: 100803016 LONE WOLF DIST. M22 & M31 ALPHAWOLF BARREL M/31 .357SIG THREADED 1/2X28 Parti Fabbricante: AW-31357TH639737069242 I barili Alpha Wolf stabiliscono il benchmark per un'accuratezza assoluta e un'affidabilità in combattimento. È il culmine di ciò che ogni altro produttore di barili cerca di essere. Le tolleranze esatte consentono un'installazione a caduta. Progettati per munizioni in piombo, placcate o rivestite. Trattati termicamente a RC 40-42 e poi rivestiti con Salt Bath Nitride. I modelli filettati vengono forniti con il relativo protettore per filettatura.
324.9CHF0CHF 324.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
I cilindri Alpha Wolf offrono un'accuratezza e un'affidabilità superiori.
Progettati per munizioni in piombo, placcate o rivestite, con tolleranze di precisione per un'installazione semplice.
I modelli filettati includono un protettore per filettatura e sono trattati termicamente a RC 40-42.
Caratteristiche
Adatto per:
Glock
Barrel Length:
5.03''
Cartuccia:
357 SIG
Finitura:
Nero
Modello:
22,31
Tipo:
Drop-In,Match Grade,Filettato
Peso della spedizione: 0.091kgAltezza di spedizione: 216mmLarghezza di spedizione: 25mmLunghezza di spedizione: 57mm
UPC
: 639737069242
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.c
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 100803014 LONE WOLF DIST. M26 ALPHAWOLF BARREL M/26 9MM THREADED 1/2 X 28 Parti Fabbricante: AW26TH397370693346 I barili Alpha Wolf stabiliscono il benchmark per un'accuratezza assoluta e un'affidabilità in combattimento. È il culmine di ciò che ogni altro produttore di barili cerca di essere. Le tolleranze esatte consentono un'installazione a caduta. Progettati per munizioni in piombo, placcate o rivestite. Trattati termicamente a RC 40-42 e poi rivestiti con Salt Bath Nitride. I modelli filettati vengono forniti con il relativo protettore per filettatura.
339.9CHF2CHF 339.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: GlockBarrel Length: 4.06''Cartuccia: 9 mm LugerFinitura: NeroModello: 26Tipo: Drop-In, Match Grade, Filettato
N. prodotto: 100803004 LONE WOLF DIST. M19 ALPHAWOLF BARREL M/19 9MM THREADED 1/2 X 28 Parti Fabbricante: AW19TH397370692660 I barili Alpha Wolf stabiliscono il benchmark per un'accuratezza assoluta e un'affidabilità in combattimento. È il culmine di ciò che ogni altro produttore di barili cerca di essere. Le tolleranze esatte consentono un'installazione a caduta. Progettati per munizioni in piombo, placcate o rivestite. Trattati termicamente a RC 40-42 e poi rivestiti con Salt Bath Nitride. I modelli filettati vengono forniti con il relativo protettore per filettatura.
319.9CHF0CHF 319.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: GlockBarrel Length: 4.60''Cartuccia: 9 mm LugerFinitura: NeroModello: 19Tipo: Drop-In, Match Grade, Filettato
N. prodotto: 100803010 LONE WOLF DIST. M23 & M32 ALPHAWOLF BARREL M/23 40 S&W THREADED 9/16 X 24 Parti Fabbricante: AW-2340TH639737069280 I barili Alpha Wolf stabiliscono il benchmark per un'accuratezza assoluta e un'affidabilità in combattimento. È il culmine di ciò che ogni altro produttore di barili cerca di essere. Le tolleranze esatte consentono un'installazione a caduta. Progettati per munizioni in piombo, placcate o rivestite. Trattati termicamente a RC 40-42 e poi rivestiti con Salt Bath Nitride. I modelli filettati vengono forniti con il relativo protettore per filettatura.
324.9CHF0CHF 324.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
N. prodotto: 100803006 LONE WOLF DIST. M22 & M31 ALPHAWOLF BARREL M/22 40 S&W THREADED 9/16 X 24 Parti Fabbricante: AW2240TH397370692110 I barili Alpha Wolf stabiliscono il benchmark per un'accuratezza assoluta e un'affidabilità in combattimento. È il culmine di ciò che ogni altro produttore di barili cerca di essere. Le tolleranze esatte consentono un'installazione a caduta. Progettati per munizioni in piombo, placcate o rivestite. Trattati termicamente a RC 40-42 e poi rivestiti con Salt Bath Nitride. I modelli filettati vengono forniti con il relativo protettore per filettatura.
319.9CHF0CHF 319.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
N. prodotto: 100803002 LONE WOLF DIST. M17 ALPHAWOLF BARREL M/17 9MM THREADED 1/2 X 28 Parti Fabbricante: AW17TH397370691984 I barili Alpha Wolf stabiliscono il benchmark per un'accuratezza assoluta e un'affidabilità in combattimento. È il culmine di ciò che ogni altro produttore di barili cerca di essere. Le tolleranze esatte consentono un'installazione a caduta. Progettati per munizioni in piombo, placcate o rivestite. Trattati termicamente a RC 40-42 e poi rivestiti con Salt Bath Nitride. I modelli filettati vengono forniti con il relativo protettore per filettatura.
319.9CHF0CHF 319.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: GlockBarrel Length: 5.03''Cartuccia: 9 mm LugerFinitura: NeroModello: 17Tipo: Drop-In, Match Grade, Filettato
Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
Altro...
I barili Alpha Wolf stabiliscono il benchmark per un'accuratezza assoluta e un'affidabilità in combattimento. È il culmine di ciò che ogni altro produttore di barili cerca di essere. Le tolleranze esatte consentono un'installazione a caduta. Progettati per munizioni in piombo, placcate o rivestite. Trattati termicamente a RC 40-42 e poi rivestiti con Salt Bath Nitride. I modelli filettati vengono forniti con il relativo protettore per filettatura.
Altro...
Punteggi dei clienti per LONE WOLF DIST. M22 & M31 ALPHAWOLF BARREL M/31 .357SIG THREADED 1/2X28
Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3.5
Not Good!(23.05.2016)
Barrel installs easy and looks great! Out to the range and to my surprise about every 2 to 3 rounds was a misfire, would not go into battery, and ejection was a big issue. I was really disappointed.
Flawless(11.02.2017)
Wanted a threaded barrel for future use and at this price point for a USA made barrel, it is a great item.
I purchased it and didn't get to use it until I took my enhanced CCW class today and out 100 rounds though it in a very short time. I had 0 feeding or ejecting issues but I did have 1 round not fire. Though this was not due to the barrel though.
The thread protector does like to twist off a little after 30 or so rounds (maybe 1/10 of a turn) but nothing out of the ordinary.
Great addition to my G19(19.02.2017)
I wanted to wait until I had used it a bit to review. I have close to 1000 rounds through this barrel now and not a single FTL, FTF, or FFE. It has worked flawlessly. The thread protector does seem to come loose about 1/2 turn every time I take it to the range, but no more than that no matter how many rounds I fire. Now just waiting for the HPA to pass.
It's black, threaded, and shoots lead(20.01.2017)
I bought this for my Glock26 Gen4. Drops in with no issues. Has cycling hick-up from time to time only when cambering a fresh magazine, not while shooting. Put 50 115Gr. FMJ's through it before it started grouping well. 2" groups at 9yds. Handled the 115Grs. & 124 +P NATO's just fine. Haven't shot any lead cast through it yet. Performs as well at storm lake barrels that I've owned.
Only issues I could think of is the coating isn't all that tough but many "match grade" barrels have no coating at all. After initial shooting the barrel was marred near the rear top of the chamber and the lockup area. Like any thread protector it needs to be tightened up from time to time as it becomes loose from shooting and/or carrying. It seemed to hit 1.5" higher than the factory barrel at 9yds.
Does not fit in the Glock 19 9mm Gen 4 stock forget about it. "Thanks" "Experts" for your recommendation NOT!
3 guns in one(07.07.2018)
Sixth LW Glock replacement barrel I have purchased and first review. Fit on 30+ year old Gen 2 M22 is as close to perfect as it gets. I shoot Powder Coat Lee 356-125-2r sized @.358 and Accurate Mold 125D no lube groove also at .358. Barrel Slugged at .3565. Accuracy at first was disappointing, but after 5-600 rounds the barrel was capable of sub 1 1/2 inch groups at 11 yds and 2 inch inch groups at 25 yds. Consistently hit 9 in pie plates at 100 yards. Also handled 125 GDHP (for 357Sig) and S.147gr TMJ's well with PP and A#9 @1250-1300fps.
Not a "deal" as advertised but exceptionally pleased with purchase. Well worth it...
Not reliable (05.05.2016)
When actually shooting, this barrel shot really well, but I say "when shooting" because over the course of about 250 rounds (3 different types of ammo, all brass jacketed), I got 2 failures to eject and 6 failures to feed. Never had these issues before and, while still at the range, switched back to my OEM barrel and didn't have any more.
Great barrel!(06.09.2017)
I've got well over 3,000+ rounds through this barrel with only one issue and that was I couldn't do 15+1 using magpul pmags. No issues on stock mags though. The coating and accuracy are excellent. Definitely a step up over the factory barrel. It is a match grade barrel so there are tighter tolerances so remember to use quality ammunition.