Non-Marring Aluminum Gets The Tightest Bushings Loose
The perfect tool for every 1911 owner’s range bag or cleaning kit. Precision machined for a close fit to Government Model and Officers bushings. The extra thick, contoured handle fits comfortably in your hand; has plenty of heft for a good, solid grip. Turns the tightest bushings without slipping. Enhanced model has a handy flange that retains the recoil spring plug as you twist the bushing free. No more flying springs or plugs!
Alluminio Non Marring Rimuove i Bushing Più Stretti
Lo strumento perfetto per la borsa da tiro o il kit di pulizia di ogni proprietario di 1911. Lavorato con precisione per una vestibilità perfetta con i bushing del modello Government e degli Officers. Il manico extra spesso e sagomato si adatta comodamente alla tua mano; ha un buon peso per una presa solida e sicura. Rimuove i bushing più stretti senza scivolare. Il modello migliorato ha una flangia pratica che trattiene il tappo della molla di rinculo mentre sviti il bushing. Niente più molle o tappi volanti!
SPECIFICHE: Alluminio, anodizzato rosso. 5½" (14cm) di lunghezza, 1¼" (3.2cm) di larghezza, ¼" (6.35mm) di spessore.
Altro...
Punteggi dei clienti per BROWNELLS 1911 AUTO ANODIZED BUSHING WRENCH
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 4.8
valuable tool(20.01.2011)
great tool for field stripping /removing bushing, tab helps to keep spring from flying out for disassembly, must have for replacing the bushing. Good fit, tight tolerances.
I would recommend to a friend(06.01.2013)
bought the regular wrench works perfect going to get this enhanced one great idea
Great for a Les Baer(27.04.2014)
It's easy to develop a technique where the wrench is placed on a firm flat surface and the 1911 is pushed down on the wrench. A simple twist will insert of remove the plug very safely. Stop cursing your tight-fitting Les Baer. Instead, buy another.
Best bushing tool I have used(18.09.2014)
Don't waste your money on any other wrench. This is the best I have ever used. Tool is extremely well made.
Plastic wrench didn't last but one time, this one will probably last for life.
Get This One(11.02.2015)
Bought several plastic offset bushing wrenches for use on my 10mm pistols as the spring ratings on them are very high and controlling the recoil plug during disassembly and reassembly was exciting at times. The plastic ones are OK but they flex when applying the pressure necessary to control a high rated recoil spring. This one is tough enough to handle the job. Get this and it'll handle anything you can dish out.
Worth it(29.06.2016)
I am generally an extremely frugal person, and I admit I initially had some misgivings about paying this much for a bushing wrench. Those misgivings were erased the first time I used it. It should last a lifetime and the additional little notch really helps with Dan Wesson assembly. Buying this IS being frugal, it'll never need replacing and time is money.
The description doesn't lie(10.12.2010)
It really is all they say. The Kart bushing on my Rock River Arms 1911 is as tight as they get. I've destroyed several of the "Cant Mar" synthetic wrenches and another aluminum wrench trying to wrestle my bushing off before I purchased one of these. Worked like a charm and didn't leave a mark on my parkerized bushing. Great wrench....worth the extra cost.
A quality tool(14.02.2011)
This is the Cadillac of bushing wrenches, no doubt about it. It fits comfortably in the hand, with gently rounded edges. It allows a firm grip without cutting into your hand.
When you need one ... you need one(03.01.2015)
I had made it through life with a "synthetic" (plastic ... polymer ... whatever term you like) bushing wrench. Then I ran into a pistol with a tight - and I mean really tight - bushing. Not sure how the original gunsmith got it on.
That's when I got religion and bought 2 of these. Sure, they're pricier than the plastic versions, but when the plastic versions break, you'll appreciate this one.
N. prodotto: 080045200 BROWNELLS 1911 AUTO ANODIZED BUSHING WRENCH050806102880 Lo strumento perfetto per la borsa da tiro o il kit di pulizia di ogni proprietario di 1911. Lavorato con precisione per una vestibilità perfetta con i bushing del modello Government e degli Officers. Il manico extra spesso e sagomato si adatta comodamente alla tua mano; ha un buon peso per una presa solida e sicura. Rimuove i bushing più stretti senza scivolare. Il modello migliorato ha una flangia pratica che trattiene il tappo della molla di rinculo mentre sviti il bushing. Niente più molle o tappi volanti!
31.9CHF0CHF 31.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Strumento perfetto per la borsa da tiro o il kit di pulizia di ogni proprietario di 1911.
Fresato con precisione per una vestibilità perfetta con i bushing del modello Government e degli Officers.
Il modello migliorato ha una pratica flangia che trattiene il tappo della molla di rinculo mentre sviti il bushing.
Caratteristiche
Adatto per:
1911
Modello:
Commander,Government,Officers
Peso della spedizione: 0.064kgAltezza di spedizione: 10mmLarghezza di spedizione: 74mmLunghezza di spedizione: 147mm
UPC
: 050806102880
Dettagli dell'elemento
Made in Usa
N. prodotto: 080045300 BROWNELLS 1911 AUTO ENHANCED ANODIZED BUSHING WRENCH050806109742 Lo strumento perfetto per la borsa da tiro o il kit di pulizia di ogni proprietario di 1911. Lavorato con precisione per una vestibilità perfetta con i bushing del modello Government e degli Officers. Il manico extra spesso e sagomato si adatta comodamente alla tua mano; ha un buon peso per una presa solida e sicura. Rimuove i bushing più stretti senza scivolare. Il modello migliorato ha una flangia pratica che trattiene il tappo della molla di rinculo mentre sviti il bushing. Niente più molle o tappi volanti!
39.9CHF0CHF 39.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Non-Marring Aluminum Gets The Tightest Bushings Loose
The perfect tool for every 1911 owner’s range bag or cleaning kit. Precision machined for a close fit to Government Model and Officers bushings. The extra thick, contoured handle fits comfortably in your hand; has plenty of heft for a good, solid grip. Turns the tightest bushings without slipping. Enhanced model has a handy flange that retains the recoil spring plug as you twist the bushing free. No more flying springs or plugs!
Alluminio Non Marring Rimuove i Bushing Più Stretti
Lo strumento perfetto per la borsa da tiro o il kit di pulizia di ogni proprietario di 1911. Lavorato con precisione per una vestibilità perfetta con i bushing del modello Government e degli Officers. Il manico extra spesso e sagomato si adatta comodamente alla tua mano; ha un buon peso per una presa solida e sicura. Rimuove i bushing più stretti senza scivolare. Il modello migliorato ha una flangia pratica che trattiene il tappo della molla di rinculo mentre sviti il bushing. Niente più molle o tappi volanti!
SPECIFICHE: Alluminio, anodizzato rosso. 5½" (14cm) di lunghezza, 1¼" (3.2cm) di larghezza, ¼" (6.35mm) di spessore.
Altro...
Punteggi dei clienti per BROWNELLS 1911 AUTO ANODIZED BUSHING WRENCH
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 4.8
valuable tool(20.01.2011)
great tool for field stripping /removing bushing, tab helps to keep spring from flying out for disassembly, must have for replacing the bushing. Good fit, tight tolerances.
I would recommend to a friend(06.01.2013)
bought the regular wrench works perfect going to get this enhanced one great idea
Great for a Les Baer(27.04.2014)
It's easy to develop a technique where the wrench is placed on a firm flat surface and the 1911 is pushed down on the wrench. A simple twist will insert of remove the plug very safely. Stop cursing your tight-fitting Les Baer. Instead, buy another.
Best bushing tool I have used(18.09.2014)
Don't waste your money on any other wrench. This is the best I have ever used. Tool is extremely well made.
Plastic wrench didn't last but one time, this one will probably last for life.
Get This One(11.02.2015)
Bought several plastic offset bushing wrenches for use on my 10mm pistols as the spring ratings on them are very high and controlling the recoil plug during disassembly and reassembly was exciting at times. The plastic ones are OK but they flex when applying the pressure necessary to control a high rated recoil spring. This one is tough enough to handle the job. Get this and it'll handle anything you can dish out.
Worth it(29.06.2016)
I am generally an extremely frugal person, and I admit I initially had some misgivings about paying this much for a bushing wrench. Those misgivings were erased the first time I used it. It should last a lifetime and the additional little notch really helps with Dan Wesson assembly. Buying this IS being frugal, it'll never need replacing and time is money.
The description doesn't lie(10.12.2010)
It really is all they say. The Kart bushing on my Rock River Arms 1911 is as tight as they get. I've destroyed several of the "Cant Mar" synthetic wrenches and another aluminum wrench trying to wrestle my bushing off before I purchased one of these. Worked like a charm and didn't leave a mark on my parkerized bushing. Great wrench....worth the extra cost.
A quality tool(14.02.2011)
This is the Cadillac of bushing wrenches, no doubt about it. It fits comfortably in the hand, with gently rounded edges. It allows a firm grip without cutting into your hand.
When you need one ... you need one(03.01.2015)
I had made it through life with a "synthetic" (plastic ... polymer ... whatever term you like) bushing wrench. Then I ran into a pistol with a tight - and I mean really tight - bushing. Not sure how the original gunsmith got it on.
That's when I got religion and bought 2 of these. Sure, they're pricier than the plastic versions, but when the plastic versions break, you'll appreciate this one.