Barrel Nut Torq Wrench for DPMS & KAC Rifles. This wrench allows the shooter to put the exact amount of pressure needed on the barrel nut while attaching the barrel to the receiver. Constructed of 3/8 high steel with 4 lugs on each side to accommodate the DPMS and KAC Barrel Nuts. Works with any 3/8 or ½ drive torque wrench. This wrench is for 24-tooth free float barrel nuts.
Chiave di coppia per dado del barilotto per fucili DPMS e KAC. Questa chiave consente al tiratore di applicare la giusta quantità di pressione necessaria sul dado del barilotto mentre si attacca il barilotto al ricevitore. Realizzata in acciaio ad alta resistenza da 3/8 con 4 alette su ciascun lato per adattarsi ai dadi del barilotto DPMS e KAC. Funziona con qualsiasi chiave dinamometrica da 3/8 o ½. Questa chiave è per dadi del barilotto a flottazione libera a 24 denti.
SPECIFICHE: Peso - .525 lbs. Si adatta ai modelli di dado del barilotto DPMS, R-25 e Knights in .308.
Altro...
Punteggi dei clienti per PRECISION REFLEX DPMS/KAC 308 BARREL NUT WRENCH
Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 3.8
Pins bent at 30 ft-lbs of torque(27.04.2013)
Set torque wrench to 30 ft-lbs. Hand tightened barrel nut first. After getting to 30 ft-lbs I noticed two of the pins bent from the torque. With bent pins, the wrench is no longer usable. So now waiting on the DPMS wrench to get the barrel nut lined up for the gas tube.
Good tool no issues(02.09.2013)
I used this wrench for 10 308 builds with no issues at all. The only thing I would suggest for any wrenches of this type is lengthen the drive squares farther from center so all torque wrenches will work. Great product
Works Like A Charm(18.12.2014)
Awesome tool. Well constructed.
On my first try to torque down my barrel nut on 30 ft. lbs., it went very smooth. Second time I pushed it to 40, no problems at all. Third time I pushed it to 50 and barely got my gas tube opening aligned. Lastly pushed it to 55 and nailed it with a breeze.
To prevent pins bent, flush the tool all the way to the barrel nut and you'll be styling.
Too big for my DPMS 308 Nut(16.03.2016)
Not sure how many stars to give an item that seems to be good quality, but doesn't fit what it should. I bought this wrench to use on an AR-308 built using a DPMS barrel nut ( 231000300 ), only to find that it was too big. Ended up using my PRI standard AR barrel nut wrench.
Quality Tool(23.03.2016)
i bought this to do an M5 build(6.5cm) using the Aero Precision barrel nut. i found out i need an AR15 wrench and not this one! i will be returning it but not due to bad quality, just an errror in judgement on my part(didn't read AP's intructions)!
the only thing i didn't like about the tool just looking at it is the pins seem to be overly long! i think they can be shorter.
i gave it 4 stars just for the quality as i was not able to use it.
GREAT Customer service(14.11.2017)
This wrench was missing from a recent order, (shipping box was crushed and ripped at some point In transit) customer service sent a replacement out quickly. Thank You!
N. prodotto: 100010967 PRECISION REFLEX DPMS/KAC 308 BARREL NUT WRENCH Parti Fabbricante: #03-0086090222549838 Chiave di coppia per dado del barilotto per fucili DPMS e KAC. Questa chiave consente al tiratore di applicare la giusta quantità di pressione necessaria sul dado del barilotto mentre si attacca il barilotto al ricevitore. Realizzata in acciaio ad alta resistenza da 3/8 con 4 alette su ciascun lato per adattarsi ai dadi del barilotto DPMS e KAC. Funziona con qualsiasi chiave dinamometrica da 3/8 o ½. Questa chiave è per dadi del barilotto a flottazione libera a 24 denti.
54.9CHF0CHF 54.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Chiave di coppia per dadi del barilotto DPMS e KAC, ideale per applicare la giusta pressione.
Realizzata in acciaio ad alta resistenza, compatibile con chiavi dinamometriche da 3/8 o ½.
Adatta per dadi del barilotto free float a 24 denti e modelli DPMS, R-25 e Knights in .308.
Caratteristiche
Adatto per:
AR .308
Peso della spedizione: 0.227kgAltezza di spedizione: 30mmLarghezza di spedizione: 56mmLunghezza di spedizione: 152mm
UPC
: 090222549838
Dettagli dell'elemento
Made in Usa
Scopri la chiave per dado del barilotto DPMS/KAC! 🔧 Progettata per una pressione precisa, è compatibile con modelli .308. Ottimizza le tue prestazioni!
Barrel Nut Torq Wrench for DPMS & KAC Rifles. This wrench allows the shooter to put the exact amount of pressure needed on the barrel nut while attaching the barrel to the receiver. Constructed of 3/8 high steel with 4 lugs on each side to accommodate the DPMS and KAC Barrel Nuts. Works with any 3/8 or ½ drive torque wrench. This wrench is for 24-tooth free float barrel nuts.
Chiave di coppia per dado del barilotto per fucili DPMS e KAC. Questa chiave consente al tiratore di applicare la giusta quantità di pressione necessaria sul dado del barilotto mentre si attacca il barilotto al ricevitore. Realizzata in acciaio ad alta resistenza da 3/8 con 4 alette su ciascun lato per adattarsi ai dadi del barilotto DPMS e KAC. Funziona con qualsiasi chiave dinamometrica da 3/8 o ½. Questa chiave è per dadi del barilotto a flottazione libera a 24 denti.
SPECIFICHE: Peso - .525 lbs. Si adatta ai modelli di dado del barilotto DPMS, R-25 e Knights in .308.
Altro...
Punteggi dei clienti per PRECISION REFLEX DPMS/KAC 308 BARREL NUT WRENCH
Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 3.8
Pins bent at 30 ft-lbs of torque(27.04.2013)
Set torque wrench to 30 ft-lbs. Hand tightened barrel nut first. After getting to 30 ft-lbs I noticed two of the pins bent from the torque. With bent pins, the wrench is no longer usable. So now waiting on the DPMS wrench to get the barrel nut lined up for the gas tube.
Good tool no issues(02.09.2013)
I used this wrench for 10 308 builds with no issues at all. The only thing I would suggest for any wrenches of this type is lengthen the drive squares farther from center so all torque wrenches will work. Great product
Works Like A Charm(18.12.2014)
Awesome tool. Well constructed.
On my first try to torque down my barrel nut on 30 ft. lbs., it went very smooth. Second time I pushed it to 40, no problems at all. Third time I pushed it to 50 and barely got my gas tube opening aligned. Lastly pushed it to 55 and nailed it with a breeze.
To prevent pins bent, flush the tool all the way to the barrel nut and you'll be styling.
Too big for my DPMS 308 Nut(16.03.2016)
Not sure how many stars to give an item that seems to be good quality, but doesn't fit what it should. I bought this wrench to use on an AR-308 built using a DPMS barrel nut ( 231000300 ), only to find that it was too big. Ended up using my PRI standard AR barrel nut wrench.
Quality Tool(23.03.2016)
i bought this to do an M5 build(6.5cm) using the Aero Precision barrel nut. i found out i need an AR15 wrench and not this one! i will be returning it but not due to bad quality, just an errror in judgement on my part(didn't read AP's intructions)!
the only thing i didn't like about the tool just looking at it is the pins seem to be overly long! i think they can be shorter.
i gave it 4 stars just for the quality as i was not able to use it.
GREAT Customer service(14.11.2017)
This wrench was missing from a recent order, (shipping box was crushed and ripped at some point In transit) customer service sent a replacement out quickly. Thank You!