English-made with heat-treated, flat-nosed jaws. Smooth-jawed model gives a tight, non-marking grip. Serrated model holds tightly and includes a lengthwise groove to hold wire or drilled rod.
SPECS: Both; 5" (12.7cm) long, 1-1/8" (2.9cm) deep throat, open to 7/16" (11.1mm) wide. Nickel plated handles, blued jaws.
Plus...
Le plus "Parallèle" que nous avons trouvé
Fabriqué en Angleterre avec des mâchoires à nez plat traitées thermiquement. Le modèle à mâchoires lisses offre une prise serrée et non marquante. Le modèle à mâchoires striées maintient fermement et comprend une rainure longitudinale pour tenir un fil ou une tige percée.
SPECS : Les deux ; 5" (12,7 cm) de long, 1-1/8" (2,9 cm) de profondeur, ouvert à 7/16" (11,1 mm) de large. Poignées plaquées nickel, mâchoires bleues.
Plus...
Évaluations client de GROBET FILE CO. OF AMERICA INC SERRATED PARALLEL PLIERS
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 5
Would buy this product again and again(14.10.2009)
Excellent quality..The best I've seen in a long time..The jaws are perfectly parralel the full length and come together so perfectly they will hold a single piece of paper!Perfect size for working with guns of any kind. A little pricey but worth it for the quality!
Smooth Jaw Pliers(20.01.2016)
I have several sets of Barnard Pliers that I have been lucky enough to source from the U.S.A.
Most of these pliers have serrated jaws, which are fine for most work and with the addition of a smooth jaw set I have all of the bases covered. There is no substitute for quality tools.
I use my serrated parallels for precise placement of dowel pins when I get ready to press them into place, and also to extract pins too. I have carefully shaped small diameter spring wire using them as well. I keep them very close nearby my vise because I reach for them all the time. The jaws are tough and the handles fit well into the palm of my hand.
Serrated parallel jaw pliers(01.09.2011)
The description needs to have a drawing or picture of serrations and groove dimensions
NICE tool!(25.01.2013)
Recently, I used the serrated jaw pliers to install a Badger Ordinance Tactical Latch lever (093-249-020WB). The pin/wire relief in the one jaw made the job a cinch.
(If you're interested, I reviewed my installation and use of the pliers on that page.)
While a bit pricey, having the right tool for the job--and a well-made tool--is priceless. They are heavy for being so small, but just the right size for firearms work.
Référence: 348181103 GROBET FILE CO. OF AMERICA INC SERRATED PARALLEL PLIERS Ref Fabricant: 1811030501869500071 Fabriqué en Angleterre avec des mâchoires à nez plat traitées thermiquement. Le modèle à mâchoires lisses offre une prise serrée et non marquante. Le modèle à mâchoires striées maintient fermement et comprend une rainure longitudinale pour tenir un fil ou une tige percée.
38.9CHF0CHF 38.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Référence: 348181105 GROBET FILE CO. OF AMERICA INC FLAT NOSE SMOOTH JAW PARALLEL PLIERS Ref Fabricant: 46.512501869500054 Fabriqué en Angleterre avec des mâchoires à nez plat traitées thermiquement. Le modèle à mâchoires lisses offre une prise serrée et non marquante. Le modèle à mâchoires striées maintient fermement et comprend une rainure longitudinale pour tenir un fil ou une tige percée.
48.9CHF0CHF 48.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
English-made with heat-treated, flat-nosed jaws. Smooth-jawed model gives a tight, non-marking grip. Serrated model holds tightly and includes a lengthwise groove to hold wire or drilled rod.
SPECS: Both; 5" (12.7cm) long, 1-1/8" (2.9cm) deep throat, open to 7/16" (11.1mm) wide. Nickel plated handles, blued jaws.
Plus...
Le plus "Parallèle" que nous avons trouvé
Fabriqué en Angleterre avec des mâchoires à nez plat traitées thermiquement. Le modèle à mâchoires lisses offre une prise serrée et non marquante. Le modèle à mâchoires striées maintient fermement et comprend une rainure longitudinale pour tenir un fil ou une tige percée.
SPECS : Les deux ; 5" (12,7 cm) de long, 1-1/8" (2,9 cm) de profondeur, ouvert à 7/16" (11,1 mm) de large. Poignées plaquées nickel, mâchoires bleues.
Plus...
Évaluations client de GROBET FILE CO. OF AMERICA INC SERRATED PARALLEL PLIERS
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 5
Would buy this product again and again(14.10.2009)
Excellent quality..The best I've seen in a long time..The jaws are perfectly parralel the full length and come together so perfectly they will hold a single piece of paper!Perfect size for working with guns of any kind. A little pricey but worth it for the quality!
Smooth Jaw Pliers(20.01.2016)
I have several sets of Barnard Pliers that I have been lucky enough to source from the U.S.A.
Most of these pliers have serrated jaws, which are fine for most work and with the addition of a smooth jaw set I have all of the bases covered. There is no substitute for quality tools.
I use my serrated parallels for precise placement of dowel pins when I get ready to press them into place, and also to extract pins too. I have carefully shaped small diameter spring wire using them as well. I keep them very close nearby my vise because I reach for them all the time. The jaws are tough and the handles fit well into the palm of my hand.
Serrated parallel jaw pliers(01.09.2011)
The description needs to have a drawing or picture of serrations and groove dimensions
NICE tool!(25.01.2013)
Recently, I used the serrated jaw pliers to install a Badger Ordinance Tactical Latch lever (093-249-020WB). The pin/wire relief in the one jaw made the job a cinch.
(If you're interested, I reviewed my installation and use of the pliers on that page.)
While a bit pricey, having the right tool for the job--and a well-made tool--is priceless. They are heavy for being so small, but just the right size for firearms work.