Shock-absorbing polyurethane buffer replaces the bolt stop pin to eliminate metal-to-metal contact and extend receiver life. Cushions the bolt’s rearward motion to help prevent receiver cracking, reduce felt recoil, and enable quieter cycling.
SPECS: Polyurethane. Fits 10/22 in .22 LR only. This buffer may be manufactured in various colors but when properly installed it will not be visible.
Plus...
Aide à prolonger la durée de vie du récepteur et à réduire le recul ressenti
Tampon en polyuréthane absorbant les chocs remplaçant la goupille d'arrêt de culasse pour éliminer le contact métal sur métal et prolonger la durée de vie du récepteur. Amortit le mouvement arrière de la culasse pour aider à prévenir les fissures du récepteur, réduire le recul ressenti et permettre un fonctionnement plus silencieux.
SPÉCIFICATIONS : Polyuréthane. S'adapte au 10/22 en .22 LR uniquement. Ce tampon peut être fabriqué dans différentes couleurs, mais une fois installé correctement, il ne sera pas visible.
Plus...
Évaluations client de TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER
Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 2.6
Good product.(29.11.2011)
Easy to install and works as described.
Poor Quality Control, Uneven Ends(21.12.2011)
The buffer provided looks nothing like the picture and is jet black, it is cut too short and at an angle on one end. Really poor quality control... it will probalby do the job but will look unfitted.
Works Okay(08.05.2012)
There's no rocket science going into this part. I can't really tell if it reduces felt recoil (and doubt that it does) but it makes sense that it would extend the life of the receiver and bolt. For this price, I don't see how this can be a bad thing.
TacSol should be embarrassed(03.06.2012)
Like the other reviewer said, a filmsy plastic tubing, poorly cut. I think the packaging costs more than the product itself. Anyone could go to a hardware store and buy a roll of cheap plastic tubing and cut it to size, which is what it looks like they did.
I would send it back, but shipping will cost more than the part itself.
DO NOT BUY!
bought two bad mistake(01.11.2012)
buffer pins are not straight ends sheared off and not perpindicular also too short
Waste of money(16.01.2013)
Quality was poor, ends not cut straight and cylinder was slighty disformed. Item fits snugly but will not go all the way through. Even added a drop of breakfree and did not help. Using the slightest hand pressure exerted to make it flush, the end will mushroom. Buy at your own risk...
Easy install(16.10.2016)
The one I received was a better fit than the factory installed seel buffer that fell out once receiver was removed from stock. Well made good fit.
run away(22.01.2018)
I love most all of Tactical Solutions products but not this one.
too difficult to install(02.02.2018)
may work for the intended purpose, but way too difficult to install. they will never go back in when I remove them to remove bolt.
Référence: 100006001 TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER Ref Fabricant: FX01X01879971001961 Tampon en polyuréthane absorbant les chocs remplaçant la goupille d'arrêt de culasse pour éliminer le contact métal sur métal et prolonger la durée de vie du récepteur. Amortit le mouvement arrière de la culasse pour aider à prévenir les fissures du récepteur, réduire le recul ressenti et permettre un fonctionnement plus silencieux.
18.9CHF0CHF 18.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Améliore ton RUGER® 10/22® avec ce tampon anti-recul en polyuréthane 🛡️. Réduit le recul et prolonge la durée de vie du récepteur.
Shock-absorbing polyurethane buffer replaces the bolt stop pin to eliminate metal-to-metal contact and extend receiver life. Cushions the bolt’s rearward motion to help prevent receiver cracking, reduce felt recoil, and enable quieter cycling.
SPECS: Polyurethane. Fits 10/22 in .22 LR only. This buffer may be manufactured in various colors but when properly installed it will not be visible.
Plus...
Aide à prolonger la durée de vie du récepteur et à réduire le recul ressenti
Tampon en polyuréthane absorbant les chocs remplaçant la goupille d'arrêt de culasse pour éliminer le contact métal sur métal et prolonger la durée de vie du récepteur. Amortit le mouvement arrière de la culasse pour aider à prévenir les fissures du récepteur, réduire le recul ressenti et permettre un fonctionnement plus silencieux.
SPÉCIFICATIONS : Polyuréthane. S'adapte au 10/22 en .22 LR uniquement. Ce tampon peut être fabriqué dans différentes couleurs, mais une fois installé correctement, il ne sera pas visible.
Plus...
Évaluations client de TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER
Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 2.6
Good product.(29.11.2011)
Easy to install and works as described.
Poor Quality Control, Uneven Ends(21.12.2011)
The buffer provided looks nothing like the picture and is jet black, it is cut too short and at an angle on one end. Really poor quality control... it will probalby do the job but will look unfitted.
Works Okay(08.05.2012)
There's no rocket science going into this part. I can't really tell if it reduces felt recoil (and doubt that it does) but it makes sense that it would extend the life of the receiver and bolt. For this price, I don't see how this can be a bad thing.
TacSol should be embarrassed(03.06.2012)
Like the other reviewer said, a filmsy plastic tubing, poorly cut. I think the packaging costs more than the product itself. Anyone could go to a hardware store and buy a roll of cheap plastic tubing and cut it to size, which is what it looks like they did.
I would send it back, but shipping will cost more than the part itself.
DO NOT BUY!
bought two bad mistake(01.11.2012)
buffer pins are not straight ends sheared off and not perpindicular also too short
Waste of money(16.01.2013)
Quality was poor, ends not cut straight and cylinder was slighty disformed. Item fits snugly but will not go all the way through. Even added a drop of breakfree and did not help. Using the slightest hand pressure exerted to make it flush, the end will mushroom. Buy at your own risk...
Easy install(16.10.2016)
The one I received was a better fit than the factory installed seel buffer that fell out once receiver was removed from stock. Well made good fit.
run away(22.01.2018)
I love most all of Tactical Solutions products but not this one.
too difficult to install(02.02.2018)
may work for the intended purpose, but way too difficult to install. they will never go back in when I remove them to remove bolt.