Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger.
SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III, and 22/45 pistols.
Plus...
Travail de Détente Drop-In Pour Pistolets .22
Usiné avec précision à partir de billettes pour un ajustement précis afin de réduire le poids de la détente et d'éliminer la pression lourde requise pour déplacer la pièce d'origine. Aide à produire un tir plus cohérent pour une meilleure précision. La vis d'arrêt est réglable pour le surcourse et le précourse avec l'arme entièrement assemblée, vous obtenez donc un tir sans jeu. La chaussure ultra-lisse offre plus de contact avec le doigt de la détente. Disponible en aluminium anodisé noir ou en acier inoxydable poli (SS). Comprend le ressort de détente et le plongeur du ressort de détente.
SPÉCIFICATIONS : Aluminium, anodisé, noir, ou acier inoxydable, finition argent naturel. Chaussure de détente de .354" (9mm) de large. S'adapte aux pistolets Ruger Mark I, Mark II, Mark III, et 22/45.
Plus...
Évaluations client de VOLQUARTSEN RUGER® TARGET TRIGGER, SS
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4.4
Far better than their aluminum trigger(25.02.2012)
Overall better fit and finish than the aluminum Volquartsen trigger. I highly recommend this over either the Ruger factory of Volquartsen aluminum trigger.
Nice touch for Mark III(08.03.2012)
The set screw on the back of the trigger is to short ,, needs to be about .070 longer. Other than that its really good . I would buy it again .
Money Well Spent!!!(08.05.2014)
High quality fit and finish. My only gripe is there aren't any instructions on the proper way to adjust the trigger. None with the product or on the company's web site. I wasn't too hard to figure out though. My original trigger pull was a creepy 4&1/4Lbs, this trigger and their replacement sear brought it down to 1&3/4Lbs. very crisp and no creep!
VOLQUARTSEN MK322/45 Trigger(14.05.2014)
I purchased the Ruger 3903 22/45 a month ago, great gun, but it came with one major factory flaw (the mag. disconnect), and one minor flaw the trigger. The trigger had way too much trvel in it, and the pounage was a bit high, so I order this trigger, and handed over to my son AJ. To my surprise he had it changed out, the bushing put in for the disconnect problem, and every thing polished up in no time. He gave me my gun back, and it was like a whole new gun, what a differance in the trigger travel, and even less poundage too boot. The gun is more accurate because of the good crisp trigger, without a good trigger your done for, and the VOLQUARTSEN deffinetly did as promised. Tom
Better have extra set screws(15.09.2011)
Trigger works as advertised and is easy to install, but set screws for trigger stop and pre-travel are too short. Especially the one used as a trigger stop. At proper adjustment for trigger stop only a couple of threads are engaged and it is almost impossible to get a satisfactory setting with the supplied set screw. Of course you don't know this prior to installation, so it becomes a PIA to replace them with longer ones. Be aware of this and have a couple of longer ones on hand before attempting installation. Too bad Volquartsen doesn't furnish a couple of different length set screws to solve this problem, they ain't that expensive considering the cost of the trigger.
Works like a dream(10.03.2012)
Trigger works great ,looks good. But the set screw on the stop ( the one right behind your trigger finger is to short needs to be .312 long 8-32 by .312 long )
Works very well.(02.05.2013)
This trigger did a very nice job of transforming my MKIII into a real tack driver. I installed it with the Volquartsen sear and a Majestic Arms 3.2 Speed Strip kit. The trigger feel after the conversion is very good. Volquartsen must be listening because my trigger came with two lengths of overtravel screw. The Volquartsen installation videos on YouTube are not useful, but there are some very good videos to guide you through the installation. I highly recommend this upgrade to your Mark series Ruger.
Référence: 930000123 VOLQUARTSEN RUGER® TARGET TRIGGER, SS Ref Fabricant: VC2TT-ST810162012441 Usiné avec précision à partir de billettes pour un ajustement précis afin de réduire le poids de la détente et d'éliminer la pression lourde requise pour déplacer la pièce d'origine. Aide à produire un tir plus cohérent pour une meilleure précision. La vis d'arrêt est réglable pour le surcourse et le précourse avec l'arme entièrement assemblée, vous obtenez donc un tir sans jeu. La chaussure ultra-lisse offre plus de contact avec le doigt de la détente. Disponible en aluminium anodisé noir ou en acier inoxydable poli (SS). Comprend le ressort de détente et le plongeur du ressort de détente.
84.9CHF2CHF 84.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.c
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 930012002 VOLQUARTSEN RUGER® TARGET TRIGGER, BLACK Ref Fabricant: VC2TT810162011475 Usiné avec précision à partir de billettes pour un ajustement précis afin de réduire le poids de la détente et d'éliminer la pression lourde requise pour déplacer la pièce d'origine. Aide à produire un tir plus cohérent pour une meilleure précision. La vis d'arrêt est réglable pour le surcourse et le précourse avec l'arme entièrement assemblée, vous obtenez donc un tir sans jeu. La chaussure ultra-lisse offre plus de contact avec le doigt de la détente. Disponible en aluminium anodisé noir ou en acier inoxydable poli (SS). Comprend le ressort de détente et le plongeur du ressort de détente.
64.9CHF5CHF 64.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger.
SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III, and 22/45 pistols.
Plus...
Travail de Détente Drop-In Pour Pistolets .22
Usiné avec précision à partir de billettes pour un ajustement précis afin de réduire le poids de la détente et d'éliminer la pression lourde requise pour déplacer la pièce d'origine. Aide à produire un tir plus cohérent pour une meilleure précision. La vis d'arrêt est réglable pour le surcourse et le précourse avec l'arme entièrement assemblée, vous obtenez donc un tir sans jeu. La chaussure ultra-lisse offre plus de contact avec le doigt de la détente. Disponible en aluminium anodisé noir ou en acier inoxydable poli (SS). Comprend le ressort de détente et le plongeur du ressort de détente.
SPÉCIFICATIONS : Aluminium, anodisé, noir, ou acier inoxydable, finition argent naturel. Chaussure de détente de .354" (9mm) de large. S'adapte aux pistolets Ruger Mark I, Mark II, Mark III, et 22/45.
Plus...
Évaluations client de VOLQUARTSEN RUGER® TARGET TRIGGER, SS
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 4.4
Far better than their aluminum trigger(25.02.2012)
Overall better fit and finish than the aluminum Volquartsen trigger. I highly recommend this over either the Ruger factory of Volquartsen aluminum trigger.
Nice touch for Mark III(08.03.2012)
The set screw on the back of the trigger is to short ,, needs to be about .070 longer. Other than that its really good . I would buy it again .
Money Well Spent!!!(08.05.2014)
High quality fit and finish. My only gripe is there aren't any instructions on the proper way to adjust the trigger. None with the product or on the company's web site. I wasn't too hard to figure out though. My original trigger pull was a creepy 4&1/4Lbs, this trigger and their replacement sear brought it down to 1&3/4Lbs. very crisp and no creep!
VOLQUARTSEN MK322/45 Trigger(14.05.2014)
I purchased the Ruger 3903 22/45 a month ago, great gun, but it came with one major factory flaw (the mag. disconnect), and one minor flaw the trigger. The trigger had way too much trvel in it, and the pounage was a bit high, so I order this trigger, and handed over to my son AJ. To my surprise he had it changed out, the bushing put in for the disconnect problem, and every thing polished up in no time. He gave me my gun back, and it was like a whole new gun, what a differance in the trigger travel, and even less poundage too boot. The gun is more accurate because of the good crisp trigger, without a good trigger your done for, and the VOLQUARTSEN deffinetly did as promised. Tom
Better have extra set screws(15.09.2011)
Trigger works as advertised and is easy to install, but set screws for trigger stop and pre-travel are too short. Especially the one used as a trigger stop. At proper adjustment for trigger stop only a couple of threads are engaged and it is almost impossible to get a satisfactory setting with the supplied set screw. Of course you don't know this prior to installation, so it becomes a PIA to replace them with longer ones. Be aware of this and have a couple of longer ones on hand before attempting installation. Too bad Volquartsen doesn't furnish a couple of different length set screws to solve this problem, they ain't that expensive considering the cost of the trigger.
Works like a dream(10.03.2012)
Trigger works great ,looks good. But the set screw on the stop ( the one right behind your trigger finger is to short needs to be .312 long 8-32 by .312 long )
Works very well.(02.05.2013)
This trigger did a very nice job of transforming my MKIII into a real tack driver. I installed it with the Volquartsen sear and a Majestic Arms 3.2 Speed Strip kit. The trigger feel after the conversion is very good. Volquartsen must be listening because my trigger came with two lengths of overtravel screw. The Volquartsen installation videos on YouTube are not useful, but there are some very good videos to guide you through the installation. I highly recommend this upgrade to your Mark series Ruger.