Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

BROWNELLS
CAN'T MAR™ 1911 AUTO BUSHING WRENCH

050806102200 080045045

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

Every 1911 owner and gun shop needs a wrench to remove the barrel bushing from the 1911 Autos. Ours fits all the calibers and variations; Colt-made (including factory Officers ACP), plus copies. Made from super tough ABS "T" grade polymers, Brownells Can't Mar™ wrench has more thickness and heft than other synthetic wrenches. It gets out even the most tightly fitted, match-grade bushing WITHOUT scarring or marring the finish of the gun's bushing or slide. Virtually unbreakable, the Can't Mar™ wrench carries easily in pocket or field kit.

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Altro...

Non Danneggia le Finiture - Praticamente Indistruttibile - Dimensioni da Tasca - Design Versatile e Doppio Estremità

Ogni proprietario di una 1911 e ogni negozio di armi ha bisogno di una chiave per rimuovere il bushing della canna dalle 1911 Autos. La nostra si adatta a tutti i calibri e varianti; Colt-made (inclusi gli Officers ACP di fabbrica), oltre a copie. Realizzata in polimeri ABS "T" grade super resistenti, la chiave Can't Mar™ di Brownells ha uno spessore e un peso superiori rispetto ad altre chiavi sintetiche. Rimuove anche il bushing di precisione più stretto SENZA graffiare o danneggiare la finitura del bushing o del carrello dell'arma. Praticamente indistruttibile, la chiave Can't Mar™ è facilmente trasportabile in tasca o in un kit da campo.

SPECIFICHE: 5½" (14,0 cm) di lunghezza. 1¼" (3,2 cm) di larghezza. .187" (4,75 mm) di spessore. Pesa 1 oz. (28,3 gm).

Altro...

Punteggi dei clienti per BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH

Numero di punteggi: 14
Da brownells.com: 14
Punteggio medio: 3

Worked once....almost (22.08.2009)

I bought one of these for my Colt Officers ACP. The wrench plastic just deformed on the first use, didn't remove the bushing, and was useless from then on. The bushing is fairly snug on my .45 so maybe that's why it didn't work. Good idea but did not work for me. A waste of my [$] and not worth the cost of returning.

Disappointed.... (14.10.2009)

It worked splendidly a handful of times. After a couple of uses it starts to get seriously chewed up and malformed, leaving bits of orange plastic all down in the guide rod area of the gun. After about 10 uses it was so chewed up it would not successfully break down the gun.

Good tool at a fair price (01.11.2009)

I like this plastic tool better than the Brownells steel Colt wrench because it is light and scratch proof. It does mar slightly because it is plastic. Unless you have super tight bushings, it works perfectly. If you have super tight bushings, you may need the aluminum bushing wrench.

Works Great, Will Not Damage Gun (24.04.2010)

Works great, will not mar finish and holds up Great. have used one in my shop for years and have taken down 100's of 1911's with it, from time to time I have run across a gun with a spring cap, bushing or a slide that has a bur and it can leave a mark on it but that is not the fault of the tool. and if the tool where to brake they are so inexpensive that I would not hesitate to purchase a replacement.

Great Finish Saver (16.08.2010)

This bushing wrench is a real finish saver.. after struggling with an SA Pro bushing, can't imagine what damage may have resulted without it. Although it does shed a little plastic and seems somewhat consumable.. it's well worth every penny compared to refinishing.

It works but has limits (10.10.2010)

The good thing about this plastic wrench is that it doesn't mar the finish, and of course, you probably won't misplace it.

If you have a tight, accurized bushing, as I do, it won't last more than a few times before it gets chewed up. But for the price, buy a few of them.

Doesn't mar your pistols. (09.04.2011)

This tool does what it says but is a little on the soft side for tight bushings. I tore mine up pretty good when fitting a Wilson Combat bushing into my wife's Colt Officers model 1911. The wilson bushing is very tight fitting(good, good,good) after fitting for accuracy. I've recently up graded to the aluminum version.

Good Bushing Wrench and will not damage! (26.03.2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (06.09.2012)

I purchased 2 wrenches but found the tolerances are sloppy for a standard 1911 A1 recoil bushing. Trying to make it fit caused the wrench to slip and the recoil spring plug to go flying off the workbench. Cost to replace the plug plus freight about $16. Recommend to step up to the metal wrench.

Good For The Price (06.05.2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (06.07.2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13.09.2014)

Wears out very fast if you have a tight fitting bushing, this won't last long at all. Material is very soft and won't mar the gun but won't last long at all. On the first use, lots of mat'l chipped away from the tool. I imagine after about three uses it would be junk.

Also, so soft that it flexes so much that you can hardly hold the spring plug down enough to turn the bushing enough to lock back in place but it doesn't scratch your weapon at all.

I have now got the brownells enhanced bushing wrench with the flange that retains the recoil spring plug as you twist the bushing free, Great tool and won't scratch your weapon as it is made of aluminum. Well worth the extra money, remember you get what you pay for.

Should have gotten one sooner (06.09.2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10.12.2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Leggi più recensioni su brownells.com

17.9 17.9 1 CHF

N. prodotto: 080045045
BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH
Parti Fabbricante: 080045045 050806102200 Ogni proprietario di una 1911 e ogni negozio di armi ha bisogno di una chiave per rimuovere il bushing della canna dalle 1911 Autos. La nostra si adatta a tutti i calibri e varianti; Colt-made (inclusi gli Officers ACP di fabbrica), oltre a copie. Realizzata in polimeri ABS "T" grade super resistenti, la chiave Can't Mar™ di Brownells ha uno spessore e un peso superiori rispetto ad altre chiavi sintetiche. Rimuove anche il bushing di precisione più stretto SENZA graffiare o danneggiare la finitura del bushing o del carrello dell'arma. Praticamente indistruttibile, la chiave Can't Mar™ è facilmente trasportabile in tasca o in un kit da campo.

17.9 CHF 537 CHF 17.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: 1911 Modello: Government, Commander, Officers

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

La chiave Can't Mar™ è compatibile con tutti i calibri e varianti delle 1911 Autos, inclusi i modelli Colt.
Realizzata in polimeri ABS "T" di grado super resistente, offre maggiore spessore e peso rispetto ad altre chiavi sintetiche.
Rimuove il bushing di precisione senza graffi o danneggiamenti, ed è facilmente trasportabile in tasca o nel kit da campo.

Caratteristiche

Adatto per: 1911 Modello: Commander,Government,Officers Peso della spedizione: 0.023kg Altezza di spedizione: 13mm Larghezza di spedizione: 79mm Lunghezza di spedizione: 150mm UPC : 050806102200

Dettagli dell'elemento

Made in Usa

Scopri la chiave Can't Mar™ per 1911! 🔧 Resistente e precisa, ideale per rimuovere il bushing senza graffi. Perfetta per ogni proprietario di 1911!

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Altro...

Non Danneggia le Finiture - Praticamente Indistruttibile - Dimensioni da Tasca - Design Versatile e Doppio Estremità

SPECIFICHE: 5½" (14,0 cm) di lunghezza. 1¼" (3,2 cm) di larghezza. .187" (4,75 mm) di spessore. Pesa 1 oz. (28,3 gm).

Altro...

Punteggi dei clienti per BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH

Numero di punteggi: 14
Da brownells.com: 14
Punteggio medio: 3

Worked once....almost (22.08.2009)

Disappointed.... (14.10.2009)

Good tool at a fair price (01.11.2009)

Works Great, Will Not Damage Gun (24.04.2010)

Great Finish Saver (16.08.2010)

It works but has limits (10.10.2010)

Doesn't mar your pistols. (09.04.2011)

Good Bushing Wrench and will not damage! (26.03.2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (06.09.2012)

Good For The Price (06.05.2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (06.07.2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13.09.2014)

Should have gotten one sooner (06.09.2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10.12.2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Leggi più recensioni su brownells.com